X-Plane Scenery
3,399 files
-
X-Plane 11 Scenery--Thomas Airport ME17 Maine 1.1.0
X-Plane 11 Scenery--Thomas Airport ME17 Maine 1.1.0. This scenery package contains Thomas Airport (ME17) and custom ortho overlay (zl19), Thomas Airport is located in the Swift River Valley right next to the river, Maine (ME), USA. It's approximately 25 nm east of Berlin Regional Airport (KBML). It makes a good base for exploring the surroundings. Change into a canoe or boat right after landing, but take care that no vehicle cross the runway while doing so! The custom ortho overlay will sit on top of any runway and taxiway textures in order to use the 'natural' textures. There is a naming conflict with the code ME17, that's why I gave Thomas Airport the code MX17 instead. ME17 is taken by another default airport in X-Plane. I modified the name in order to make it work for everybody straight away. However, you can change the codes yourself if you want after installing it. This scenery requires the following object libraries: The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP), FlyAgi (FLYAGI_VEGETATION.ZIP), CDB library (CDB_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the RA Library 1.2+ (RA_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.31 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Abbots Airport 6ME6 Maine 1.1.6
X-Plane 11 Scenery--Abbots Airport 6ME6 Maine 1.1.6. This scenery package contains Abbots Airport (6ME) and custom ortho overlay (zl19). Abbots Airport is located in the SW corner of Maine (ME), USA, not far from New Hampshire and White Mountain National Forest. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), CDB library (CDB_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP), JB Library (JB_LIBRARY.ZIP) and RuScenery (RUSCENERY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.43 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Nine Mile Airport MT52 Montana 1.1.0
X-Plane 11 Scenery--Nine Mile Airport MT52 Montana 1.1.0. This scenery package contains Nine Mile Airport (MT52) and ortho-overlay (ZL19). Nine Mile Airport is a private airstrip approx. 18nm WNW of Missoula in Montana (MT), USA. It has a 2600' long grass/turf runway at an elevation of 3364'. Its name comes from the Ninemile Creek running through the valley to the south. The beautiful valley and the surrounding mountains make a superb backdrop for flying in or out. Explore the area or take it as stop over point between the Idaho Mountains and northern Montana and the Glacier National Park. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), CDB library (CDB_LIBRARY.ZIP) and RuScenery (RUSCENERY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
47 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Hamburg VFR 3.1.2
X-Plane 11 Scenery--Hamburg VFR 3.1.2. This is a 3D object scenery to complement the city of Hamburg and the surrounding area of +53+009 in Germany. Hamburg is 4.5 nm, course 175 degrees from EDDH. This version includes the night lighting of important buildings. The scenery uses objects from the SketchUp 3-D gallery and objects from the FSX Hamburg 2003 scenery by Dirk Brandenburg which was later converted for X-Plane by Christian Trapp. With his kind permission, I can put these objects into my scenery and I want to pass many greetings to his country of choice, Australia. Furthermore, Captain Nuts, as a local expert of Hamburg, participated in the design. Created with objects from the SketchUp 3D Warehouse. A big thanks to the countless creators for sharing their work on that platform! HDR rendering must be enabled to see the light effects. It is also very important to read the readme for installation! By Gunther Kremp.140 downloads
-
X-Plane 11 Scenery--Dillon Creek Bar California 1.0
X-Plane 11 Scenery--Dillon Creek Bar California 1.0. This scenery package contains Dillon Creek Bar, Klamath River, northern California (CA), USA and custom ortho-overlay (ZL19). This is not a 'real' landing spot: Dillon Creek Bar is a gravel bar in the Klamath River Valley in Northern California, USA. Its approx. location is somewhere between Somes Bar and Clear Creek. Go find out yourself! It is named after the creek running into the Klamath River near some river bends downstream. It has no identifier, no lights, no windsocks, no services. It's only you, your aircraft, the river and the gravel bar. Can you make it in and out again? You always got the choice to disassemble your aircraft, get it over the river and up the bank to the Klamath River Hwy running along the other side of the river. Look out for the boulders, rocks and logs around, you can actually crash your aircraft against them. Really. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
43 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--WBAK Anduki Airfield (H) 1.2
X-Plane 11 Scenery--WBAK Anduki Airfield (H) 1.2. Anduki Airfield is located near the town of Seria in Brunei, on the amazing island of Borneo. Nestling in the South China Sea, only a couple hours flight from Kuala Lumpur and Singapore, Borneo is home to an amazing array of wildlife and still retains much of it's virgin rain forest. Requires the latest versions of the following object libraries: 3D People Library (3D_PEOPLE_LIBRARY.ZIP), CDB library (CDB_LIBRARY.ZIP), World Model Library (WORLD2XPLANE.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the RE Library (RE_LIBRARY.ZIP). Please see the included documentation for further details. Version 1.2: removed a few helipads to prevent conflict with static aircraft. By Stuart McGregor.38 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Cabin Creek USFS I08 Idaho 1.0
X-Plane 11 Scenery--Cabin Creek USFS I08 Idaho 1.0. This scenery package contains Cabin Creek USFS Airport (I08) and custom ortho-overlay (ZL19). Cabin Creek Airport is small gravelstrip a mile up from the Big Creek River Valley in the centre of the Idaho mountains, USA. It mainly serves as a USFS airport but is open to anybody who wants to set down their wheels. It's more or less a one-way-strip, so make sure you pick the right conditions when flying in. Note that the erosion mitigation poles will have an effect on your ground handling here. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), RD_Library (RD_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and RuScenery (RUSCENERY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
42 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Fish Lake USFS S92 Idaho 1.1.0
X-Plane 11 Scenery--Fish Lake USFS S92 Idaho 1.1.0. This scenery package contains Fish Lake USFS Airport (S92) and custom ortho-overlay (ZL19). Fish Lake Airport is a remote airstrip in north-eastern Idaho (ID), USA. It is located in the mountains between the Selway River to the south and the Lochsa River to the north. Its elevation is at 5640' and it has got a 2600' long turf/dirt runway pointing out towards the directly adjacent Fish Lake. Besides two cabins and a shed, it can offer the companionship of elk, wolves and bears, an incredibly starry sky during the night and superb fishing. Grab the two canoes down by the lake but make sure to secure them again when you leave. Bring enough food and fuel, because if stranded here, it may take some time before somebody finds you. Take care - the airport is marked as hazardous and rumors go that "everything about this place looks idyllic, but take note that there are 5-6 planes at the bottom of Fish Lake along with 8 bodies." This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), RD_Library (RD_LIBRARY.ZIP), Madagascar Library (MBA_110.ZIP) and the RUScenery (RUSCENERY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
49 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Totem Pole Ranch Airport CA38 California 1.0
X-Plane 11 Scenery--Totem Pole Ranch Airport CA38 California 1.0. This scenery package contains Totem Pole Ranch Airport (CA38), an unknown Airstrip, plus custom ortho-overlay (ZL19). Totem Pole Ranch Airport is a small private dirtstrip in the northern Sierra Nevada approx. 30nm northwest of Lake Tahoe. Its field elevation is at round about 5000' and is 1800' long. There is an unknown and uncharted strip 1-2 miles to the north east, which is included in this package too - also with its own ortho-overlay. Make sure to stop by those airstrips on your way around the northern Sierra Nevada. It's an incredible area to explore! The custom ortho-overlay will sit on top of any runway and taxiway textures in order to use the 'natural' textures. The X-Plane code for Totem Pole is 4Q7 and I assigned 4Q7X to the unknown strip close by. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
33 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Lofty Redwoods Airport 53CL California 1.0
X-Plane 11 Scenery--Lofty Redwoods Airport 53CL California 1.0. This scenery package contains Lofty Redwoods Airport (53CL) and custom ortho-overlay (ZL19). Lofty Redwoods Airport is an airstrip on a rolling mountain ridge close to the ocean approx. 50nm west of Santa Rosa, California, USA. It has a 3200' long gravel strip. Its location, the large trees surrounding it and its narrowness makes it a challenging place to fly into and out of. Lofty Redwoods is a good stop-over point while buzzing up and down the Californian coast. You are always welcome to pitch your tent next to the runway. The nearby gas station provides all basic necessities. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), NAPS Library (NAPS_LIBRARY.ZIP), RuScenery (RUSCENERY.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.44 downloads
(0 reviews)0 comments
Submitted
-
X-Plane Scenery--Munich VFR 3.1
X-Plane Scenery--Munich VFR 3.1. This is a 3D object scenery to complement the city of Munich and the surrounding area of +48+011 in Germany. Created mainly for VFR flights in order to increase the realism of the landscape. Requires the following object libraries: FF Library (extended version) (FF_LIBRARY_EXTENDED_LOD.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the R2 Library (R2_LIBRARY.ZIP). This scenery uses objects from the SketchUp 3D Warehouse. A big thank you to the many creators of these objects. This version has night lighting and more buildings and details added. It is also very important to read the readme for installation! By Gunther Kremp.148 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Las Trancas Airport 17CL California 1.0
X-Plane 11 Scenery--Las Trancas Airport 17CL California 1.0, CA, USA. This scenery package contains Las Trancas Airport (17CL) and custom ortho-overlay (ZL19). Las Trancas Airport is a 1300' dirt/grass airstrip approx. 30 nm south of Half Moon Bay (KHAF) sitting right on top of the shoreline, with steep drop-offs on both ends of the runway. It's location makes it a scenic place to fly into and out of and is a good place to stop by when travelling up and down the Californian coast. It serves and is owned by the Big Creek Lumber Co right across the street. Take care of the wind shear. The ortho-overlay will sit above any runway and taxiway textures, in order to use the 'natural' textures. Configurations for Ortho4XP are provided in the read-me.txt file Modified osm.airport data is provided as well. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
65 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Santa Cruz Island Conservancy Airfield 1.0
X-Plane 11 Scenery--Santa Cruz Island Conservancy Airfield CA 1.0. This scenery package contains Santa Cruz Island Conservancy Airfield (No ID) and custom ortho-overlay (ZL18). The Conservancy Airfield is one of three airstrips on Santa Cruz Island, the largest of the Channel Islands in California (CA), USA. It's a privately owned and private use grass airstrip. It's situated in a small valley above the ocean. Its sloped runway makes for a challenging landing that is rewarded by the sight of the ocean below. Follow the valley inland to get to the nearby ranch where you will also find a helicopter landing spot. When you continue along the valley, you will eventually hit Christy Airfield on the other side of Santa Cruz Island christy_airstrip_ca97_california.zip. You won't find it on the sectional. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
51 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Pista El Guayabo Quevedo (SEEG) Ecuador 1.0
X-Plane 11 Scenery--Pista El Guayabo Quevedo (SEEG) Ecuador 1.0. Pista El Guayabo is a small private airstrip located outside Quevedo, Los Rios Province, Ecuador. It is located 1.7 NM E from Quevedo's Rio Cenepa Airport (SEQE) (A_SEQE_-_QUEVEDO_RIO_CENEPA.ZIP), at a banana farm. This farm is next to some hills, and part of those hills have been flattened so they don't interfere with the approach. This airstrip is used by crop dusters, and the runway is 800 meters long. Please see the Readme.txt file for more information including library requirements. By Sandro Rota - Ecuador Aviation Photography.33 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Christy Airstrip CA97 California 1.0
X-Plane 11 Scenery--Christy Airstrip CA97 California 1.0. This scenery package contain Christy Airstrip (CA97) and custom ortho-overlay (ZL19). Christy Airstrip is one of three airstrips on Santa Cruz Island, the largest of the Channel Islands, California (CA), USA. It's a privately owned and private use airstrip with a 2500' grass runway. It's a decently challenging strip, in particular the approach for runway 09. Go here if Catalina is too crowed with weekend flyers or you simply want to explore what the Channel Islands have to offer. Great hiking opportunities included. You won't find it on the sectional. I placed quite a bit of vegetation on this one, so let me know if your performance takes a too large hit and I will reduce it for an updated version. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP), RD_Library (RD_LIBRARY.ZIP), and RuScenery (RUSCENERY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.37 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Santa Rosa Island Airfield California 1.1.0
X-Plane 11 Scenery--Santa Rosa Island Airfield California 1.1.0. This scenery package contains Santa Rosa Island Airfield and custom ortho-overlay (ZL18). Santa Rosa Island Airstrip is an airstrip on Santa Rosa Island of the Channel Islands in southern California, USA. It's located approx. 30nm south off the coast of Santa Barbara. If Catalina is too crowded, go here and you will most certainly have your peace. The landing strip is right above the shore line and makes for a picturesque flying experience. Fly-in to Santa Rosa to enjoy the calmness of the island or hang out at the farm, which this airstrip serves as well. You won't find it on the sectional. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), RuScenery (RUSCENERY.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.51 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--San Miguel Island Airstrip California 1.0
X-Plane 11 Scenery--San Miguel Island Airstrip California 1.0. This scenery package contains San Miguel Island Airstrip and custom ortho-overlay (ZL19). San Miguel Island Airstrip is a small airstrip on the northwestern most island of the Channel Islands in southern California (CA), USA. It's located approximately 25 nm off the coast. If Catalina is too crowded, go here and you will most certainly have your peace. Nothing much here. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP) and RuScenery (RUSCENERY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.45 downloads
(0 reviews)0 comments
Submitted
-
X-Plane Scenery--Oslo XP Airport Collection Upgrade 1.1
X-Plane Scenery--Oslo XP Airport Collection Upgrade 1.1, Norway. This package requires the payware version of Oslo XP by Aerosoft. Package includes 27 alternative commercial "ad posters" for the airport. Collection include vintage and newer type of images. Due to instancing in the model by original design, there is no way to have one different image per building. This is a limit set by the designer, but you can change the image with your own choice at any time to liven up the airport. Please see the included Readme file for installation instructions. By Tom Knudsen.40 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Merced River Overlook California 1.1.0
X-Plane 11 Scenery--Merced River Overlook California 1.1.0. This scenery package contains Merced River Overlook landing spot, California (CA), USA, custom ortho overlay (zl19) and a STOL Challenge. This is not a 'real' landing spot. Merced River Overlook is a viewpoint spot at the top of the Ferguson Ridge above the Merced River Valley at 3825 feet elevation. It doesn't really consist of more than the view point plateau and the dirt tracks leading to it along the ridge. Depending on how you look at it, you got approx. 300-350 feet to land and take-off again. Don't even think to bring your Cessna. If you feel comfortable hitting your touchdown point with 100% certainty, you can try your STOL skills here. You will need them! Make sure to calculate fuel and weight in a way which saves you every possible pound. It's also a good spot for the helicopter pilots out there. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP) and the RD_Library (RD_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.34 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Wurtz Airport MT17 Montana 1.0
X-Plane 11 Scenery--Wurtz Airport MT17 Montana 1.0. This scenery package contains Wurtz Airport (MT17) and custom ortho overlay (ZL19). Wurtz Airport is an airstrip in the beautiful Flathead River Valley only 5nm from the Canadian border. Make a stop over here on your way into BC or when you fly around the Glacier National Park to venture into Montana's most stunning wilderness! However, you don't have to go far to get an adventure. In close proximity to the airstrip, you'll find three gravel bars that are waiting for your tundra tires. It's not shown on the sectionals and some confusion regarding its code seems to exist. MT17 is X-Planes native designator for it. This scenery requires the following object libraries: PuF Libs (PUF_LIBS_1_0_1.ZIP), RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), RD_Library (RD_LIBRARY.ZIP), and the MisterX Library (MISTERX_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.36 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Santa Rosa Regional Airport (SERO) Ecuador
X-Plane 11 Scenery--Santa Rosa Regional Airport (SERO) Ecuador 1.0. Santa Rosa Regional Airport (also known as Coronel de Artilleria Victor Larrea Airport) serves the city of Machala in the El Oro province, Ecuador. It is located in Santa Rosa, 28 km south from Machala. It was inaugurated in 2010 when Machala's "General Manuel Serrano" airport was closed. This airport was built next to the Santa Rosa Agro airfield which is a private airstrip used for cropdusting. Though it is not part of the same airport, the Santa Rosa Agro runway appears in the airport charts. However, both airfields are separate and there is no physical connection between both. Santa Rosa tower must be contacted for takeoff and landing clearance. This scenery pack contains both the Santa Rosa and Santa Rosa Agro runways with various starting points. Until recently, Tame had daily flights from Quito. Since 2019, Aeroregional flies to Santa Rosa and recently, Latam Ecuador announced it will operate from Quito. Different shrimp farms and banana farms operate from Santa Rosa and have their hangars here as well as Alas del Ecuador flight school. Daily general aviation flights from Guayaquil and other parts of the coast can be seen here. Occasionally, military flights operate to and from Santa Rosa. Please see the Readme.txt file for more information including library requirements. By Sandro Rota - Ecuador Aviation Photography.29 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Fumipalma Pista La Cadena (SELC) Ecuador 1.0
X-Plane 11 Scenery--Fumipalma Pista La Cadena (SELC) Ecuador 1.0. Fumipalma Pista La Cadena is a private airstrip located near the town of Valencia in Los Rios province, Ecuador. La Cadena is owned by Fumipalma, a cropdusting company and is used to fumigate the nearby palm oil plantations. It consists of a main hangar, and a few other buildings. This airstrip is 4.3 NM NE from Quevedo's Rio Cenepa airport (SEQE): a_seqe_-_quevedo_rio_cenepa.zip. Special thanks to Sir Hofma whose photos are published to show the real airport. Please see the Readme.txt file for more information including library requirements. By Sandro Rota - Ecuador Aviation Photography.28 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--General Villamil Airport (SEII) Ecuador 1.0
X-Plane 11 Scenery--General Villamil Airport (SEII) Ecuador 1.0. General Villamil Airport serves the town of Puerto Villamil on Isabela Island, Galapagos, Ecuador. It is one of three airports on the archipelago. This small airport is located less than a kilometer NE of Puerto Villamil. Though there are no scheduled flights, there are occasional flights operated by two airlines in Galapagos: Emetebe and Fly Galapagos (Airzab) from San Cristobal and Baltra islands. Private planes can also be seen here as well as planes from the Ecuadorian Air Force and Navy. The runway is paved and its dimensions are 1500 x 30 meters. The small platform harbors a few small planes. There is a terminal and the fire rescue services. Please see the Readme.txt file for more information including library requirements. By Sandro Rota - Ecuador Aviation Photography.37 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Milhous Ranch Airstrip 79CL California 1.0
X-Plane 11 Scenery--Milhous Ranch Airstrip 79CL California 1.0. This scenery package contains Milhous Ranch Airstrip (79CL) and custom ortho overlay (zl19). Milhous Ranch Airstrip is a small airstrip 28nm north east of Yuba City, CA, in the Sierra Nevada, USA. While its runway is mostly flat, it sits on a small ridge. It's narrow and is surrounded by dense vegetation. It's declared a one-way strip. Land to the north and take off to the south. Trip-Tip: the North Table Mountain Ecological Reserve is only 30nm to the north. The scenery requires the following object libraries: RD_Library (RD_LIBRARY.ZIP), FlyAgi (FLYAGI_VEGETATION.ZIP), OpenSceneryX (OPENSCENERYX.ZIP)) and the RA Library 1.2+ (RA_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.
30 downloads
(0 reviews)0 comments
Submitted
-
X-Plane 11 Scenery--Table Mountain Field 5CL9 California 1.0
X-Plane 11 Scenery--Table Mountain Field 5CL9 California 1.0. This scenery package contains Table Mountain Field (5CL9) and custom ortho overlay (zl19). Table Mountain Field is a small airstrip in the Sierra Nevada 25 nm north of Fresno, CA, USA, overlooking Kerckhoff Lake. Another feature than the 2000' long and 50' wide dirt strip surrounded by forests, is its interesting runway profile. Choose your touchdown point with care. This scenery requires the following object libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), RD_Library (RD_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP), Madagascar Library (MBA_110.ZIP) and the MisterX Library (MISTERX_LIBRARY.ZIP). Please see the included documentation for further details (including how to install). Uploaded to FlightSim.Com by Wookie042.37 downloads
(0 reviews)0 comments
Submitted
Announcements
-
Popular Contributors
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
-
Talked About
-
