File (before Jan 2023) Owners - Please contact us - We will place your files under your own account

MSFS Scenery

Followers 4

360 files

Sort By

Eddesfield Update for Neil's Farm Strips- Vol-8 users UK MSFS

By neilfb

While flying to Eddsfield, I noticed the terrain needed some attention and the code was wrong, it's EGWO.
Unzip the file into a temp folder the copy/move the folder into your community folder. Overwrite when asked

If you want an easy way to transfer files you can't do better than downloading QDir , it's free (donation would be good) and it gives you four screens to drag and drop is really easy to use.
neil.birch@ntlworld.com
Thanks
Neil

14 downloads
(0 reviews)
0 comments

Submitted Monday at 08:11 AM
Wallis-International, Peterborough, for Neil's Farm Strip Vol-25 users MSFS

By neilfb

Wallis-International, Peterborough, for Neil's Farm Strip Vol-25 users
Another small strip located directly at the side of the River Nene.
Non farm strip users can still use this scenery minus scenery.

Unzip the file into a temp folder the copy/move the folder into your community folder. Overwrite when asked
If you want an easy way to transfer files you can't do better than downloading QDir , it's free (donation would be good) and it gives you four screens to drag and drop is really easy to use.
neil.birch@ntlworld.com
Thanks
Neil

6 downloads
(0 reviews)
0 comments

Submitted Sunday at 09:08 AM
Lumb-Airfield EGRW-Middlebrook-Airfield UPDATE for Neil's Farm Strips Vol-10 MSFS

By neilfb

Lumb-Airfield EGRW-Middlebrook-AirfieldUPDATE for Neil's Farm Strips Vol-10 users
I have just corrected the terrain model and removed some trees.

--------------------------------------------------------------------------
HOW TO INSTALL:
1. Unzip file and place the folder into your community folder.
Overwrite when asked.
any problems or queries- neil.birch@ntlworld.com
If you like my work feel free to donate to my paypal account neilb1948@hotmail.co.uk

10 downloads
(0 reviews)
0 comments

Submitted May 1
Sherburn-Airfield for MSFS

By neilfb

Sherburn-Airfield for MSFS
I wrote this scenery originally for Neil's Farm Strips Vol-11, but when flying there it didn't look quite right so I have re-written it.
Be sure to read the description if you have Vol-11 installed.

Anyone can enjoy this scenery no other addons are required all files are included.

20 downloads
(0 reviews)
0 comments

Submitted April 27
Maasmond North/South Poles

By alrocreation

Located in the Netherlands, these two helicopter platforms, then commonly known as "mushrooms", flank the entrance to the Rotterdamsche Waterweg, the commercial mouth of the Meuse at Maasvlakte. Erected in 1970, active, focal plane of 25 m (82 ft), continuous red and green light.
Two round cylindrical concrete towers, 31 m (102 ft) high, topped by a square technical room and a helipad.
Each tower is painted with horizontal stripes of white red (North) and white green (South), spaced 1000 m (3280 ft) apart. The northern breakwater is 2,700 m (8,858 ft) long and made up of thousands of marine concrete blocks. These structures are closed to the public.
Good flights
To be continued ...
Requires: airport-lights-replacement and EDHK Lights & Objects Developers Pack

20 downloads
(0 reviews)
0 comments

Submitted April 20
Northfield-Farm, Old-Bolinbroke. UK MSFS

By neilfb

Found another farm strip , just a couple of miles from my last update. Plenty long enough for most GA's. Enjoy.
I have included all the necessary models.
Unzip the file into a temp folder the copy/move all the folders into your community folder.

If you have my Neil's farm Strips you probably already have some of my models but overwrite everything
just in case.
If you want an easy way to transfer files you can't do better than downloading QDir , it's free (donation would be good) and it gives you four screens to drag and drop is really easy to use.
neil.birch@ntlworld.com
Thanks
Neil

14 downloads
(0 reviews)
0 comments

Submitted April 15
A518-Ashley's-Field,Chapel-St-Leonards.UK MSFS UPDATE

By neilfb

AG518-Ashley's-Field,Chapel-St-Leonards.UK MSFS UPDATE
Neil's Farm Strips-Vol-21
Just an update to correct the terrain mesh.
Can also be used without the need for my Farm Strips, without buildings

Location- 53.2190 0.2710
Thanks
Neil

10 downloads
(0 reviews)
0 comments

Submitted April 13
Ballyrattan-Private-Airstrip for Neil's Tours 100 + Ireland Airfields for MSFS.

By neilfb

Ballyrattan-Private-Airstrip for Neil's Tours 100 + Ireland Airfields for MSFS.
I am just in the process of touring the beautiful Emerald Isle and am flying up in the North West area and have noticed a couple of private farm strips. As there are no airfields in the area these would be a great starting point to tour this lovely unspoilt area of Northern Ireland.
17/35.As the runway runs uphill quite steeply so depart on 17 land on 35
Located on the BEL VOR- 43.4nm 318 radial
Primarily for users of my scenery who will already have my models, but can also be used by anyone without the custom models
Artistic impression only

14 downloads
(0 reviews)
0 comments

Submitted April 10
Rashenny-Airstrip for Neil's Tours Ireland Airfields for MSFS

By neilfb

I am just in the process of touring the beautiful Emerald Isle and am flying up in the North West area and have noticed a couple of private farm strips. As there are no airfields in the area these would be a great starting point to tour this lovely unspoilt area of Northern Ireland.
Located on the BEL VOR- 53nm 317 radial
Primarily for users of my scenery who will already have my models, but can also be used by anyone without the custom models
Artistic impression only

12 downloads
(0 reviews)
0 comments

Submitted April 9
EGRO Roche-Airfield UK MSFS UPDATE

By neilfb

EGRO Roche-Airfield UK MSFS UPDATE
This is simply an update for Neil's Farm Strips Volume5 users- Roche-Airfield.
I have corrected and added a few thing.
People who don't have my farm strips can still use it as well, without the buildings.

11 downloads
(0 reviews)
0 comments

Submitted March 22
Kitty-Hawk, Farm, Ringmer UK MSFS

By neilfb

Kitty-Hawk, Farm, Ringmer UK MSFS

Found another farm strip , I have left off. Choice of two runways.
Includes installation instructions

17 downloads
(0 reviews)
0 comments

Submitted March 12
Colemore-Common, Colemore,UK- MSFS

By neilfb

Colemore-Common, Colemore UK MSFS

Found another farm strip , I have left off. Plenty long enough for most GA's. Not much here apart from a shed with tea making facilities and a toilet. Enjoy
Unzip the file into a temp folder the copy/move all the folders into your community folder.
If you have my Neil's farm Strips you probably already have some of my models but overwrite everything
just in case.
Anyone who would like to donate to my pension fund, my paypal email is neil.birch@ntlworld.com or use the same email if you would like me to reproduce an airfield near you which by some miracle I haven't done. Cheers. Neil

16 downloads
(0 reviews)
0 comments

Submitted March 8
Tiger's EGNM mod v1.0.3

By tiger1962

Inibuilds EGNM Leeds Bradford airport v.1.0.1 is required for this mod.
The current parking spots at this airport only allow for one airliner to park at each of the two jetways, which is not realistic.
This mod changes all the Ramp parking spaces on the main apron to Gates, so that the full amount of your selected percentage of airline AI Traffic can park.
GA traffic will now only park on the Multiflight aprons across the runway from the terminal buildings.

46 downloads
- egnm
- leeds
- (and 3 more)
  Tagged with:
  - egnm
  - leeds
  - leeds bradford
  - inibuilds
  - tiger
(0 reviews)
0 comments

Updated March 5
Mitton-Micro-Airfield, Stafford EGXQ. UK

By neilfb

Mitton-Micro-Airfield, Stafford EGXQ. UK
I've found another farm strip for you to explore. Mitton-Micro. Not very long but most GA should be able to land here.
51.0170 -1.2679
Not easy to find, but I have made it a little bit easier.
I have included all the models, but anyone with my Farm Strip volumes will probably have the models, but overwrite to be on the safe side.

24 downloads
(0 reviews)
0 comments

Submitted March 4
South-Longwood-Airstrip AF78 UK. MSFS

By neilfb

Neil's Farm Strips
South-Longwood-Airstrip AF78 UK.
I've found another farm strip for you to explore. South-Longwood-Airstrip, Eastleigh. Plenty long enough for most GA aircraft.
51.0170 -1.2679
Not easy to find, but I have made it a little bit easier.
I have included all the models, but anyone with my Farm Strip volumes will probably have the models, but overwrite to be on the safe side.

26 downloads
(0 reviews)
0 comments

Submitted March 4
MSFS 2020 - Mittelplate drilling and production platform

By grimsel

Mittelplate is a drilling and production platform in the German sector of the North Sea, near the island of Trischen offshore Friedrichskoog (Schleswig-Holstein). It produces Germany's largest oilfield.
Mittelplate is a complex, densely packed installation. Compared to the real structure, my model is very simple. Phantasy as much as knowledge was used to design it. Nevertheless, with the prominent drilling rig and living quarters it resembles the real thing.

For more information (installation, "how to find", legal) please refer to the readme.txt file contained in the archive.

18 downloads
(0 reviews)
0 comments

Submitted February 26
MSFS 2020 - Launceston Castle, Cornwall (UK), V1.1.1

By grimsel

Set on a large natural mound, Launceston Castle dominates the surrounding landscape. Begun soon after the Norman Conquest, todays remains consist of a 13th-century round tower built by Richard, Earl of Cornwall, inside an earlier circular shell-keep. It is a very windy place and probably not too pleasant to stay at at that time.

The default scenery places a round multi-story building at the site of the castle. The add-on replaces it with the tower and the shell-keep and adds the remains of two gate houses. This new version does not add any further buildings or remains but updates the way, materials, textures and terra forming rectangles are treated. The tower is illuminated.

This version makes the scenery compatible to the commercial Great Britain South scenery of Orbx. This means: if you are using the previous version 1.1.0 of my scenery and you are not using the Orbx scenery, then you do not need to download this new version. There is no added benefit for you.

For further information please read the README.TXT file contained in the archive.

By Christian Grimsel

20 downloads
(0 reviews)
0 comments

Submitted January 25
MSFS 2020 Scenery - Kassel Augustinum Residence Version 1.2.0

By grimsel

The three towers of the Augustinum Senior Citizen Residence are situated in the West of Kassel (Germany) on the slope towards the hills of the Habichtswald. The towers with their coloured facade elements form a prominent and well visible landmark in the area.
Version history:
1.0.0 - initial version
1.1.0 - added night textures
1.2.0 - recompilation using modified materials; cars added to the car park

For more details please refer to the readme.txt

By Christian Grimsel.

19 downloads
(0 reviews)
0 comments

Submitted January 25
MSFS 2020 - Kassel-Wilhelmshoehe Station (Germany) V2.1.0

By grimsel

Kassel Wilhelmshoehe train Station Version 2.1. Train Station completed in 1990. This new version is mainly a recompilation but also provides some added detail.

For more information, please read the README.TXT file contained in the archive.

By Christian Grimsel

25 downloads
(0 reviews)
0 comments

Submitted December 23, 2023
MSFS 2020 - Beauly Priory, Scotland - V1.1.0

By grimsel

At the western end of the Beauly Firth lies the little town of Beauly (French "beau lieu" meaning "beautiful place") with its 13th century Valliscaulian priory. This scenery replaces the default building with a more accurate representation of its remains.

This new version does not provide any new buildings or other features. I is only a recompilation to ensure compatibility of the add-on with today's - and future - versions of the SDK and the simulation.

By Christian Grimsel

37 downloads
(0 reviews)
0 comments

Updated December 23, 2023
MSFS 2020 - East Frisian Island of Langeoog (Germany) V1.3.0

By grimsel

This add-on performs several corrections to the distribution of vegetation of the default scenery and adds a photo-realistic water tower. Current version 1.3.0 does not provide any new buildings of features but is a maintenance version with adjustments and a re-compilation to ensure future compatibility. The scenery is compatible to the commercial East Frisian Island scenery version 1.4 of Stairport.

By Christian Grimsel.

41 downloads
(0 reviews)
0 comments

Submitted December 20, 2023
MSFS 2020 - Launceston Castle, Cornwall (UK), V1.1.0

By grimsel

Set on a large natural mound, Launceston Castle dominates the surrounding landscape. Begun soon after the Norman Conquest, todays remains consist of a 13th-century round tower built by Richard, Earl of Cornwall, inside an earlier circular shell-keep. It is a very windy place and probably not too pleasant to stay at at that time.

The default scenery places a round multi-story building at the site of the castle. The add-on replaces it with the tower and the shell-keep and adds the remains of two gate houses. This new version does not add any further buildings or remains but updates the way, materials, textures and terra forming rectangles are treated. The tower is now illuminated at night.

For further information please read the README.TXT file contained in the archive. In this README.TXT I forgot to mention that you need to delete an existing previous version of this scenery from the community directory before you copy the new version to the community directory.

By Christian Grimsel

28 downloads
(0 reviews)
0 comments

Updated December 18, 2023
MSFS 2020 - Pevensey Castle, East Sussex (UK), V1.1.0

By grimsel

Pevensey is the place, where William the Conqueror landed in Britain in 1066. He found the remaints of a roman castle, besieged and burned in 491 by the Anglo-Saxons and re-fortified by Harold Godwinson in 1042. When he landed, he found the castle undefended, as its garrison had moved northward to fight Norwegians who had invaded England there. In the coming centuries, the castle was repeatedly under attack.

The scenery replaces the default scenery and adds the castle walls and the remains of the towers. This new version does not add new buildings, but uses rectangles and polygons to improve the blending of the add-on into the default scenery. It also updates the way, materials and textures are treated.

For further information please read the README.TXT file contained in the archive. In this README.TXT I forgot to mention that you need to delete an existing previous version of this scenery from the community directory before you copy the new version to the community directory.

By Christian Grimsel

35 downloads
(0 reviews)
0 comments

Updated December 18, 2023
MSFS 2020 - East Frisian Island of Spiekeroog, V1.0.1

By grimsel

Spiekeroog is one of the Eastfrisian Islands separating the open North Sea from the Wadden Sea towards the Eastfrisian mainland.

This add-on performs several corrections to the distribution of vegetation of the default scenery. The senery is compatible with the "East Frisian Island" scenery version 1.4 of Stairport.
This new version is just a re-compilation of the previous version and does not contains any new features. Re-compilation is performed to ensure future compatibility.

For further information please read the README.TXT file contained in the archive. In this README.TXT I forgot to mention that you need to delete an existing previous version of this scenery from the community directory before you copy the new version to the community directory.

By Christian Grimsel

36 downloads
(0 reviews)
0 comments

Updated December 18, 2023
MSFS 2020 - Kassel (GER) Sewage Plant Improvement V2.0.0

By grimsel

This scenery add-on adds the three sewage gas towers of the Kassel sewage treatment plant. The egg-shape towers of a height of about 42 m collect gas for the production of electricity and are well visible from the air.

Version history
V1.0.0 Initial version
V1.1.0 Corrected version
V2.0.0 Adds 6 clearing tanks and a chimney, removes a non-existing building

Please read the README.TXT contained in the archive file for further information.

By Christian Grimsel.

26 downloads
(0 reviews)
0 comments

Updated December 15, 2023