babara
-
Posts
5 -
Joined
babara's Achievements
-
The only solution that work propperly and i have tested after many reboots is: Open regedit.exe. Go to the Section-> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\GameUX\ Delet the registry entries/Key: S-1-5-21-1380981980-2726883197-928252028-1000 / May be different leave only these Keys: Games + Machine Settings DON'T DELET THESE KEYS!!! Thats all. No reinstall. My Flight Sim has 29 GB and over 170.000 Files! :-) :-) :-)
-
Why the Cabin "night" light does not work. The RR Trent modell work perfect but unfortunately the night light for the cabins in this particular GE modell are dark. Is a fix comming nect time??? -
1. read the manual carefully. To Start the APU Engines. 2. Set main electric switch by "right" click to on for activating the avionics. 3. All fuel pumps and crossfeeds set to on. 4. APU start: Chutter set to open, start valve set to on and the covered button right click to activate. Then click start button for APU. Then activate the air pressure by setting both the levers to on. 5. Engine starting: set start levers to on and press start button until red rpm warning lamp is glowing. This is an excelent Aircraft with no major faults. The stall Problems that had reported above I could not noticed. I testet a speed range between 150 and 275 Knts JAS above 10..000 feets and I still have no stall problems at all. -
I had no problem with stall. At above 10.000 ft i testet speeds between 150 LAS and 375 JAS. But i had another problem: How can i start the APU? The switches APU Pump, APU Start and APU Shutter are all worling fine. Also all buttons are working fine. But the APU do not start. Teh only chance to start the four engines is tu press ctrl E for automatic engine start. It takes about 6 - 8 minutesuntill all engines running. Is there any solution or tip in sight??? Thangs for your help.
-
I had no problem with stall. At above 10.000 ft i testet speeds between 150 LAS and 375 JAS. But i had another problem: How can i start the APU? The switches APU Pump, APU Start and APU Shutter are all worling fine. Also all buttons are working fine. Th only chance to start the four engines is tu press ctrl E for automatic engine start. It takes about 6 - 8 minutesuntill all engines running. Is there any solution or tip in sight??? Thangs for your help.
