Jump to content

FSX Panels

812 files

  1. Century III AP Update for AC 500 Panel

    This file follows the Century III Autopilot Version 4.8.0 update project just posted on this website.
     
    This is an add-on panel folder for your existing Aero Commander AC 500, for evaluation purposes as an example of how the Century III AP update fit an existing panel.
     
    Sorry, not everyone would need this folder, hence I did not include it in the ST_Century_III_UPD.ZIP file.
     
    If you have already unzipped the Century III AP folder into your main FSX\Gauges folder, just add this panel folder to your Aero Commander.
     
    The Word.DOC file in the original download shows you and example AIRCRAFT.CFG text file change that activates this add-on panel.
     
    Enjoy!   Panel Modifications By Ronald Prindle

    37 downloads

       (0 reviews)

    0 comments

    Submitted

  2. Century III Autopilot Update

    This updated version of Scott Thomas's Century III Autopilot (as seen in The Aero Commander Projects), is Steve Thomas's autopilot with some of the FSX gauge constraints removed and Roll / Pitch controls activated. 
     
    This is the third version of the Century Series "Wing-Levelers".   This version has a built-in altitude hold feature that the first two models did not have.  Having actually flown a Century III, twice in real life, I have always enjoyed flying the FSX Aero Commander and always wanted to make a fully functional Century III in the Shrike and even more so, a new gauge I could open up and apply to other airplanes.  After a bit of work, here is the best of Scott's hard work, as I saw it fly, here for you to try out as well.  It is a very different wing-leveler that I have found, fun to fly!  A project by Scott Thomas & Ronald Prindle

    39 downloads

       (0 reviews)

    1 comment

    Submitted

  3. FSX Logger & RNAV Update

    FSX Panels & Gauges. This update package brings more legacy radios and updates to your existing FSX avionics. Updates for existing packages are for the RNAVs I have uploaded, to allow for Robbie's "Logger" to recall waypoint data last used. All these updates have a "Localizer Protection" added so the RNAV basically stays off-line when you dial in a localizer frequency into Nav 2. An experimental ID-824 Narco VOR head and King KI-204 & 203's can be found in this package if you're looking for something different to look at for Nav #2. All XML files, as in past packages, can be installed manually, or with recomended editors like FS Panel Studio software for "better fits" to existing panels. By Ronald Prindle.

    312 downloads

       (0 reviews)

    0 comments

    Updated

  4. FSX - Century IIB Update 2024

    FSX - Legacy Avionics Century IIB Autopilot UPDATE 24!   
    This update is for the replacement of both existing 
    (Century_IIB_AP.ZIP & Century_IIB_UPD.zip) found on 
    FlightSim.Com that now has environmental fixes on entry
    and exiting the autopilot operation.
     
    New default Century Flight Systems, Inc. panel images
    have been provided as well as the original "Piper" 
    images.  Simply copy the (Century_IIB_UPD_24.zip) 
    unzipped update folder into your FSX \Gauges
    \Century IIB AP\ folder. 
     
    Enclosed are four versions to pick from, in that the
    "ORG" is the most basic form of the Wing Leveler and
    tested NAV Tracking.  Nav1 in the basic PIPER and "C"
    Century IIB forms, have proven to track the NAV/GPS
    toggle switches found on almost all panels today.
     
    Also enclosed are both PIPER and Century IIB "expanded"
    versions that have NAV1 & Nav2 Lateral Guidance Selects
    that work with known HSI's and the LOC Inbound Tracker
    includes a Glideslope servo control.
     
    All four versions have their specifically labeled face
    plates and still DO NOT HAVE ALTITUDE HOLD functions.
    Navigation intercepts and assigned altitudes are the 
    responsibility of the pilot on all versions of the 
    Century IIB as it has been documented in all updates.
     
    New installation or image editing, is again done by 
    Text File editing software, (like notepad) or the 
    recommended FS Panel Studio Package. 

    32 downloads

       (0 reviews)

    1 comment

    Updated

  5. DEM Foster 511 RNAV for FSX

    David E. Myhr's Foster 511 RNAV and the Narco 860 RNAV for FSX is a unique two-waypoint RNAV Computer that really does NOT need a guidance indicator to fly.  Unlike most RNAV units that feed their flight data out to a flyable indicator, the Foster simply adds a DME to an existing navigation radio and reads out both BEARING TO and DISTANCE to fly in digital gas-tube displays.  This RNAV package is more than just the David E. Myhr Foster 511, this is the final day production units that also drive indicators of your choice (RNAV-tested) and gives Ground Speed and Time-To-Station results as well as DME-coupled ILS approach data where marker beacons are being removed these days. It is an expanded form of the Foster 511 by David E. Myhr updated and aligned with published specifications by Ron Prindle, for General Aviation Pilots who want a user-friendly RNAV.
     
    Notes:  I highly recommend that you "pickup" and install "LOGGER" by Robbie McElrath that is found on this website.  Why?   There are a lot of thumbwheels to spin for two-waypoints, I frankly can’t get use to sitting in the “run-up area” setting up GPS units these days and spinning a lot of wheels takes time.   Whatever I can do to speed up getting off the Checklist the better.   It’s much quicker to use the LOGGER option and use a simple text editor BEFORE my flight and update the FOSTER.TXT file with the waypoint data I intend to fly.   Don’t get me wrong, the thumbwheels work fine and in the air, changes are easy to make and in a cruse, I can fly to the one waypoint while changing the other.  Two waypoints in a simple RNAV is a great thing!
     
    Indicators?   I recommend you read the Word.DOC file that comes with this package whereby an existing King KNS-81 RNAV HSI indicator works just fine with these Nav #1 RNAVs.  You can find it on this website under “FSX King KNS-81 RNAV Update” the N1HSI version is what I use!  The VOR indicators I like with these units would be the ones supplied with the Nav #2 introduction Fosters as well as the the one Nav #1 Narco 860 RNAV indicator I brought over from the “FSX Narco NS-800 RNAV” file on this website.  A standard VOR head with glide slope needle and is RNAV compatible with the Foster Nav #1 projects.   
     
    How do you get a “good fit” of these gauges?  I recommend still, software like FS Panel Studio to make the process effortless.
     
    RLP 5/12/2023

    29 downloads

       (0 reviews)

    0 comments

    Updated

  6. FSX Embraer E Series Panel

    This is a repaint of the panel bitmap of the FS9 Embraer series E panel by Uwe Ingber. I did this to more acurately reflect current color schemes of E series aircraft after observing such on a recent E-190 flight. I have also added and removed some gauges from the original configuration to make it operable in FSX. I removed the FMC and default Garmin GPS in favor of the GPS by Gavin Munro. I also added the Airport ID gauge by David "OPA" Marshall and the V Speed gauge by Rob Barendregt. Also added the FSX default Lear 45 radio gauge as well as the Runway Info gauge by Ernie Alston. As such, this FS9 panel is usable in FSX. See README for further details.  By Christopher Tower

    138 downloads

       (1 review)

    0 comments

    Submitted

  7. FSX 2D Panel For The Transavia PL12 AirTruk

    FSX 2D Panel For The Transavia PL12 AirTruk. This panel is based on photographs of real AirTruk aircraft cockpits and can be used as a 2D panel in conjunction with any AirTruk model. Gauges are all default FSX but chosen to represent the style of those found in the aircraft. The Transavia PL-12 Airtruk is a single-engine agricultural biplane aircraft designed and built by the Transavia Corporation in Australia. By Dean Stringer.

    282 downloads

       (0 reviews)

    0 comments

    Updated

  8. FSX/P3D Panel--Airbus A330

    FSX/P3D Panel--Airbus A330. This is an Airbus A330 2d panel with many unique custom sounds created using Doug Dawson's dsd_sound gauges. Your first officer will call your V speeds, and control your flaps, which may be useful, while piloting the A330. Over 70 custom xml gauges are included for you to alter, and 60 custom sounds to alter as well. Tested in FSX SE and P3D V5.3. By Stephen Davey.

    377 downloads

       (0 reviews)

    0 comments

    Submitted

  9. FSX Defaultimate 747 Virtual Cockpit Upgrade

    FSX Defaultimate 747 Virtual Cockpit Upgrade. The Defaultimate 747 adapts G Munro's Boeing 747-400 2D Panel V3 (B747-400V3.ZIP) for the default FSX B747-400 VC. In addition to this increased functionality (EICAS, EFIS, TCAS and much more), this package introduces emissive and dome lighting to the VC. Landing, taxi and navigation lights have been decoupled on the exterior model. Other enhancements include animated wipers, switchable and dimmable MFDs and a max autopilot bank bezel among other things. Perhaps most pleasing is that this package absolves one of the great crimes against flight simulation - the hatchet job that was the VC autopilot panel in the default 747-400. This abomination has finally been fixed and it is time now for this queen to return to the FSX skies. By Wheelie Bin Studios.

    883 downloads

       (1 review)

    3 comments

    Submitted

  10. FSX Learjet 45 Panel Revision 8X

    FSX Learjet 45 Panel Revision 8X. This revision corrects some missing gauges, and installation to FSX is much easier. Update to David Durst's Lear Jet 45 panel. Has moving map display with terrain, updated autopilot, Bob Kellogg's Head-Up Display (HUD), GPWS, enhanced PFD and EICAS displays, autopilot annunciator, authentic radio management units (RMUs), NAV2 or NAV1 radio can couple to HSI and autopilot, functional Crew Warning Panel (CWP) and Crew Alerting System (CAS), improved Master/Caution displays, and audible (spoken) warnings and cautions including V1, rotate and V2 calls. Has drift bug and heading bug. Full documentation is provided. By Jon Dyer.

    617 downloads

       (0 reviews)

    2 comments

    Submitted

  11. FSX Simple 3-Axis Autopilot, Revised

    FSX Simple 3-Axis Autopilot, Revised. This is the AP3 autopilot I packaged with my King KI-300C.ZIP. The flightsim-friendly AP is updated to let you track to a final approach fix or GPS/VOR radial and then it will turn and track the centerline. All XML. This update is complete, neither the prior version nor my King KI is needed. Add to any panel and/or as a popup. Instructions included. By Bob Kellogg.

    302 downloads

       (0 reviews)

    4 comments

    Submitted

  12. FSX Radio Stack For Glass Cockpits

    FSX Radio Stack For Glass Cockpits. Not a real gauge. It combines the tuning of nav/com/adf and transponder, with audio selectors and autopilot controls, into one easy-to-read gauge. It pops-up like the radio stack in any steam-gauge plane. A 2nd version works with Jon Dyer's Garmin GMC507 autopilot (GMC507_REV3.ZIP). Add as a popup to any panel. Instructions included. By Bob Kellogg.

    280 downloads

       (0 reviews)

    0 comments

    Submitted

  13. FSX Douglas DC-4 Panel 2D And VC

    FSX Douglas DC-4 Panel 2D And VC. This is a new panel for the DC4. The 2D panel is pretty good in appearance and functionality. The VC has quite a good appearance but functionality is limited. It is designed specifically for 1920x1080 screens and will not work well on smaller screens. A large monitor is recommended as the gauges are quite small. Please read instructions. By G. Munro.

    327 downloads

       (0 reviews)

    5 comments

    Submitted

  14. FSX 2D Throttle Panel For The Six Engine Antonov AN225

    FSX 2D Throttle Panel For The Six Engine Antonov AN225. This 2D panel works in FSX for the Antonov AN225 created by Thomas Ruth. I love this plane but noticed the throttle quadrant in the 2D cockpit was missing, so I created one. Although basic, it works well! By Barivision.

    173 downloads

       (0 reviews)

    1 comment

    Submitted

  15. FSX/P3D McDonnell Douglas DC-9 Super 80 2D Panel HD Resolution

    FSX/P3D McDonnell Douglas DC-9 Super 80 2D Panel HD Resolution. McDonnell Douglas DC9 Super 80 2D cockpit panel (16:9 HD resolution 1920-1080). Features CAT-3 ILS autoland. By Takeshi "Gian" Goda.

    415 downloads

       (0 reviews)

    4 comments

    Submitted

  16. FSX/P3D Buffalo Airways DC3 2D And VC Panel

    FSX/P3D Buffalo Airways DC3 2D And VC Panel. Missed a file again. Please replace previous upload. By G. Munro.

    349 downloads

       (0 reviews)

    1 comment

    Submitted

  17. FSX/P3D Lockheed L-1011 Tristar 2D Panel HD Resolution

    FSX/P3D Lockheed L-1011 Tristar 2D Panel HD Resolution. Lockheed L-1011 Tristar 2D Cockpit Panel (16:9 HD resolution 1920-1080). Features CAT-3 ILS AUTOLAND. By Takeshi "Gian" Goda.

    313 downloads

       (0 reviews)

    1 comment

    Submitted

  18. FSX/P3D Embraer E190 Panel With VC

    FSX/P3D Embraer E190 Panel With VC. This is a new panel for the Embraer E 190. The gauges are pretty much identical to the real aircraft with all switches and dials working. It includes a FMC with flight plans, VNAV function, radio tuners, and maps. There is also a HUD which follows the Embraer specification. A detailed manual is included. Please at least read the installation instructions. By G. Munro.

    492 downloads

       (0 reviews)

    1 comment

    Submitted

  19. FSX General Aviation HUD2 Update

    FSX General Aviation HUD2 Update. Improved simple hud for small aircraft, light twins, turboprops and small jets. A new option. Annotated XML. Coding tips and instructions included. Original not needed. By Bob Kellogg.

    398 downloads

       (0 reviews)

    1 comment

    Submitted

  20. FSX/P3D Boeing 747-8F Panel With VC

    FSX/P3D Boeing 747-8F Panel With VC. This is a new panel displaying the complete width of the main panel for the Boeing 747-8F. At first sight it seems identical to the Boeing 747-400 however there are some small differences. Although this panel is for the Boeing 747-8F it could also be used on the passenger version and also on a Boeing 747-400. The main differences are in the air conditioning panel and the doors. It is meant for 1920X1080 screens and will not look good on smaller screens. Drawback of this panel is that the gauges are pretty small but still readable. It includes 2 FMCs and a VC with limited functionality which which is entirely 747-400. Manuals are included - please at least read the installation instructions. This panel is identical to the original release on 7 April except the manual in the original release was corrupted. This release includes the full manual. By G. Munro.

    501 downloads

       (0 reviews)

    1 comment

    Submitted

  21. FSX/P3D Panel--Concorde Update

    FSX/P3D Panel--Concorde Update, for use with CONCORDE-4.ZIP. A user has pointed out to me that the HSI points to completely the wrong direction. Shameful to miss such a glaring error. This update contains only the CNC.CAB file to replace the existing one. The only change is to update the HSI. By G. Munro.

    286 downloads

       (0 reviews)

    0 comments

    Submitted

  22. FSX Panels And Gauges--Unified Panel For PA24

    FSX Panels And Gauges--Unified Panel For PA24. Piper PA-24 Comanche Unified Panel Project is an optional upgrade suggested by my real-world Instrument Instructor (R.O. Finley) to "merge" all the 2D panels found in the Comanche collection into one, clear view. I have grown to enjoy the simpler operation and I believe if you have the recent downloads of my FSX vesrion of Mike Stone's Comanches, you'll like this conversion as well. Panel.CFG's and Aircraft.CFG's by Ronald Prindle.

    218 downloads

       (0 reviews)

    0 comments

    Submitted

  23. FSX BoeingGeneric.dll Replacement Gauges

    FSX BoeingGeneric.dll Replacement Gauges. This is just a little set of gauges in XML which replace the old BoeingGeneric.dll gauges. They fit exactly in any position where the Boeing Generic gauges are used. As they are written in XML they can easily be modified and the background colors can be easily changed. Numbers are more easily legible and rotating them is easier. Other than that it works in exactly the same way. It works in FSX 2D and VC panels and should work in FS2004 as well. By G. Munro.

    194 downloads

       (0 reviews)

    2 comments

    Submitted

  24. FSX/P3D Concorde Panel

    FSX/P3D Concorde Panel. This is a new panel for Concorde. Only suitable for screens 1920x1080 or larger. An aircraft is included so that you can see it working straight away. It can be fitted to other Concorde models but the VC may not work. It includes full working 2D and VC panels including Flight Engineer Panel (not in VC). Almost all switches and knobs work and functionally try to follow the technical data in heritageconcorde.com. The manual is daunting but please at least read the first part. By G. Munro. (See also CONCORDE_UPDATE.ZIP)

    462 downloads

       (0 reviews)

    3 comments

    Submitted

  25. FSX Noorduryn Norseman Panel

    FSX Noorduryn Norseman Panel. 2D and VC Panels for the Noorduryn Norseman from Brian Gladden. These fit 1600 x 900 screen resolution. Package contains new 2D and VC bmps, a new panel.cfg and a new gauge cab. These were made in FSX, however they should work fine in FS2004, although not tested. Any of the original FSX or FS2004 Noorduryn (norsemanfloat.zip) aircraft packages required. By Scott Thomas.

    171 downloads

       (0 reviews)

    0 comments

    Submitted

×
×
  • Create New...