uenoshing
-
Posts
19 -
Joined
-
Last visited
uenoshing's Achievements
-
142 downloads
FSX Grumman XF10F-1 Jaguar_v1.11_up Fixed a few things that bothered me. Adjusted the landing gear contact point, damper compression ratio, etc. I think that the climbing power has improved a little with the adjustment of the engine and aerodynamics. Fuel consumption has also been revised to be roughly in line with the published data for the XF10F, and worse than before. The exaggerated canopy glass and gauge glass reflections have also been reduced. Also fixed some textures. The previous file "zue_xf10f1_v1.zip" is required to update. I haven't tested whether it works outside of FSX ACCELERATION. FSDS v3.5 model by UENOSHING.- 1 review
-
- 1
-
-
Thank you for your interesting report. My aircraft looks like a real plane. -
FSX/Acceleration Boeing-Saab T-7A Redhawk Package
uenoshing reviewed welker's file in FSX Modern Military
.thumb.jpg.8649199d7999e16bab35a137887a3b02.jpg)
Hello Erwin, You have created an aircraft that no one has ever seen in FSX. It's worth it and I'm happy. We still have a lot of things we can do with FSX. Enjoy more creation! -
Thank you all for your various reviews. Also, thank you for pointing out things that I didn't notice myself. I am glad that you are enjoying my model.
-
Version FSX Grumman XF10F-1 Jaguar_v1
346 downloads
FSX Grumman XF10F-1 Jaguar_v1. The XF10F is a member of the Grumman cat family, called the Jaguar. A US Navy swing-wing prototype fighter that first flew in 1952. Unlike the F-14, the XF10F wing slides forward and backward to vary the swept angle. And the large jaguar drawn on the plump body is very fashionable. The XF10F is also my favorite "never completed aircraft". I have not tested it works other than FSX ACCELERATION. FSDS v3.5 model by UENOSHING. -
158 downloads
FSX Lockheed XFV-1_v1.12 I forgot to write the [Radios] section in the previous update. My model is built for FSX, but P3D avionics may work with this fix. (Not guaranteed to work with P3D). And the unstable engine sometimes caused the parking brake to not work and move on its own, but I was finally able to fix that. It has revised engine power and brake settings. Instead, the top speed was reduced a bit, and it is a challenge to reach an altitude of 30,000 feet. I focused on stability on the ground. I learned the hard way that FSX's turboprop engine is difficult to use. This update requires zue_lockheed_xfv1_v1_11.zip. By UENOSHING. -
254 downloads
FSX Lockheed XFV-1 v1.11. Updated Lockheed XFV-1. After releasing v1, I compared my XFV-1 to the photos again and felt it needed fixing. Because I modeled 9 years ago when I was still inexperienced with FSDS. So I bulged out the canopy and the lower fuselage a bit. I also sharpened the spinner a little and installed the tail wing parts that I had forgotten. So Luckily the texture wasn't a large scale fix. I also fixed some other concerns. Improved flight dynamics and engine performance. Fixed autopilot lamp gauge XML. About the night display of the VC warning lamp, about the shadow of the propeller, adjustment of the specular map, etc. It was failing to land vertically on hard realism settings, but the success rate has been increased. FSDS 3.5 model by Uenoshing. -
459 downloads
FSX Mitsubishi J8M1 Shusui v1. The Mitsubishi J8M Shusui is a Japanese secret weapon that flies with rocket power jointly developed by the Japanese Navy and the Army at the end of World War II, and was based on the German Messerschmitt Me163. Me163 materials provided by Germany were sunk by the US military while being transported by submarine. The materials of Me163 that arrived in Japan had only a photograph of the exterior and a small amount of data. However, Japanese aviation engineers completed the J8M Shusui in just one year and made its first flight on July 7, 1945. Shusui release the wheels after takeoff. This my model uses a gear lever to release the wheels. Skid retracts and extends use flap keys. There is only about 6 minutes of fuel. When the fuel runs out, glide from the sky of 10,000 meters and return. In addition, the gauge using "Night Texture" shines even in the dark. I wanted to reproduce the gauges painted with the luminous paint of the WW2 Japanese aircraft. I have not checked if it works with other than FSX Acceleration. FSDS model by Uenoshing. -
372 downloads
FSX Rockwell XFV-12A v1. The Rockwell XFV-12A is a 1977 US Navy VTOL aircraft using a "thrust augmented wing". However, the development of the XFV-12A was canceled because it did not achieve the expected performance. This XFV-12A FSX model was built by me 7 years ago. It's not a detailed model because I built it when I wasn't used to FSDS yet. I thought about rebuilding it into a detailed model, but it takes a lot of time, so I release it without fixing anything. It substitutes the nose of an external model and has a simple VC. I don't know when it will be, but eventually I will rebuild the detailed XFV-12A and release version 2. I use Mr. Rob Barendregt's VTOL gauge with permission from him. This is for FSX Acceleration; I haven't tested it to work elsewhere. By Uenoshing. -
439 downloads
FSX USAF Republic XF-103 Thunderwarrior v2. An unfinished Mach 3 class interceptor of the US Air Force in the 1950s. Updated FSX Republic XF-103 to version 2. Fixed the shape of the rear fuselage model and VC model. That fixed the texture significantly and changed some gauges. And you can select the drop tank using the lever in the VC. I removed the afterburner built into the model and changed it to the afterburner of the effect file. Added 2D panel to be used as an auxiliary. Fixed flight dynamics. I think this fix makes it easier to handle. This is for FSX Acceleration. I haven't tested it to work elsewhere. By Uenoshing. -
295 downloads
FSX Douglas D-558-2 Skyrocket Rocket Model v1.1. The rocket model D-558-2 Sky Rocket has been updated to V1.1. On my D-558-2, if the reality setting was hard, the battery died mid flight and all indicators were disabled. The voltage gradually decreased, and it was found that the cause was that the battery was not charged. I added a generator switch to the VC to control the generator. Along with that, some textures have been fixed. I was surprised that FSX was so real. This non-charging issue has also been fixed in D-558-2 Hyblid model v1.1, early model v1. FSDS v3.5 model by Uenoshing. -
309 downloads
FSX Douglas D-558-2 Skyrocket Hybrid model v1.1. This is an update of the previous model FSXD-558-2 # 003_v1, changed to Hyblidmodel_v1.1. Fixed an issue where pilot legs were visible from the outside of the nose. And I changed the air intake to a larger size. It may look and feel like a real sky rocket. Along with that, the texture was also fixed. When the reality setting was hard, the battery died in mid flight, but it has improved. Added new texture variations. FSDS v3.5 model by Uenoshing. -
282 downloads
FSX Douglas D-558-2 Skyrocket Early Model v1. This model is an early Douglas D-558-2 Sky Rocket at rollout. The canopy was a smooth flush canopy with a beautiful silhouette integrated with the fuselage. The smooth flush canopy seemed to have bad visibility and was replaced with a protruding canopy before the first flight on February 4, 1948. As a result, the vertical stabilizer was affected and replaced with a taller vertical stabilizer. Therefore, the sky rocket did not fly in this smooth flush canopy. Another feature is the smooth flush mount air intake and the jet nozzle that exhausts diagonally downwards, resulting in intake efficiency and reduced engine performance. Therefore, early Skyrocket is a low-performance, unattractive jet airplane. But I think it's a very ideal and beautiful aircraft design! The rocket engine mount has a smooth cover. Therefore, it looks like a very small white fish, "Salangidae", which Japanese people like to eat, and it is very cute. The reason for built the early Sky Rocket is how does the view from the canopy with bad forward visibility and open ceiling look? I wanted to see it. Flying an aircraft with low engine performance and poor visibility is also a real pleasure of a flight simulator. FSDS v3.5 model by uenoshing. -
414 downloads
FSX Republic XF-91 Thunderceptor V2 Package. FSX Republic XF91 updated. Modification of VC switch, and improvement of engine starting. Addition of new animations. The afterburner effects was also added. Afterburner Effects XML Gauges are licensed for use and modification by Mr. Rob Barendregt. Also, I received a lot of technical advice from Mr. Erwin Welker and reflected it in XF-91_v2. I would like to express my sincere gratitude to two big names. This package contains four types of XF-91: XF-91A: Unit number one. The unfinished XLR27 rocket engine model envisioned Mach 2 speeds. XF-91A2: The XLR11 rocket engine model, which replaced the canceled XLR27, was the first fighter in the world to exceed the speed of sound. XF-91B: A model in which unit number one is changed to a radome nose. XF-91V: A model in which unit number two is changed to a butterfly tail. The rocket engine is removed, and the model is a turbojet engine only. This is a native FSX Acceleration project. VC controls the animation of this aircraft. FSDS V3.5 Model by uenoshing.
.thumb.jpg.8649199d7999e16bab35a137887a3b02.jpg)
