Flattermann

Hi, I too get this problem (double Screen, window mode), if I start ADE while FSX is running. I have to close FSX (close window) and to start FSX new, so it works. So I start usually ADE bevor starting FSX. It couldn't be a heating problem, because the problem comes if I start the PC for the first time in the day also.

I tested a lot of stock water airports in FSX and never found docks. I made my own with ADE, and specially for AI traffic. But you have to change something to use them for AI-traffic :rolleyes:

Hi, Faulting application path: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe reading the ERROR text, the installation of FSX in "C:\Program Files (x86)" instead of "C:\Microsoft Games\Microsoft Flight Simulator X\fsx.exe" could be the problem.

Hi, in FSX there are some elderly airplanes with complete VC and passengerroom. For instance the Lockhead L18 Lodestar, where you can go through (in VC modus) and take seat where you wish. Try strg+enter. I dont know if there are newer and bigger airplanes having such possibilities.

AIROUND also[emoji41] Gesendet von iPhone mit Tapatalk

I have the same experiences, no problems.

Hi, if I choose an aircraft and a startairport (From) in AIFP Flight Plan Editor and the Departure Time 00.00 and the same airport (To) -Repeat 2 hr - Flight Rules IFR and klicking FL it shows 00:19 ETA (Duration 0:19). Where is your problem? Perhaps I can't understand your question.

Hi Bernard, I can remember you gave me a link for some FS9 pilotable cars or so. 'Yes, tempus fugile'. Have you tried the (for me unknown) mentioned tool AICARRIERS2.zip? If you have an other big ai-ship for FS9 you can try to change the aircraft.cfg and use it adapted for the Queenmary. Just as a test.

Hi Bernard, I have no FS9 but I downloaded the Queen Mary and found inside the main folder a folder called 'ai_RMS Queen Mary'. This folder contains a sim.cfg. I tried to install the ship as AI-boat for my FSX. It works normally. Good luck for you.

I made about 1,000 trafficfiles for my FSX - without the ships traffic files which are about 2,000 incl. the files from Henrik Nielsen and from myself. It is for me the best way to fill the regions I am used to fly with AI-traffic. Visiting this areas I never met a plane I doesn't like or a overcrowded airport. Finding a airport without traffic I made some for my own. Why should I purchase a ready traffic? I think (for me!) it would be boring. So I have enough to do with my beloved hobby:cool:

Hi Michael, thank you for answering. It is for me very interesting. Today I tried it again there with this aircraft but I changed the weather to "clear heaven". So I had no problems to rise the beechbaron:). I have to say I am using the little program SIMStarterNG and there is a preinstalled weather called "userdefined" I can't say in which special form this could be because I never had problems. Sometime there is no wind sometime the strongness is at 22 ktn. It doesn't matter for me - till yesterday. If I don't change the weather I have problems with the beechbaron. Now the honor of the beauty is restored and I beg your pardon for the confusion I have made with my posting. BTW the "userdefined" strongness of the wind was 0 kt !?

Hi Rick , never try to fly with this beauty from LA Paz (Bolivia) SLLP to SLCB -or otherwhere. It is too high for this plane 13.313 ft. I tried it yesterday and couldn't rise the aircraft. So I had to change to an old DC3 :cool:

Hi Stewie, I made many seaports with ADE from FSDeveloper.com. Sorry but only for FSX. I never had FS9. But I think you could try to make your seaports with this program. Ask at the FSDeveloper forum for more information

Which aircraft are you using? Perhaps there is no possibility to release(?) the RadioStack or GPS at this aircraft. Normally you can release such gauges and drag it to your second monitor.

I would say the female is part of the model (mdl file) Gesendet von iPhone mit Tapatalk

There is nothing wrong with the picture, but the elevation of the hydropolygons are wrong:rolleyes: Years ago I bought a new mesh for the Andes because the default are ridicolous. The readme says a known issue would be the level of some hydropolygons and some airports. Very bad sometimes look the Amazonas like a thik vein on the ground. I downloaded SBuilderX and worked many,many days repairing the scenes. This was for FSXA. Maybe there are now better solutions by other flight simulators:D

Thank you Chuck, I tried to change the FSX Piper J3 Cub airfile with AirEd but I don't find 'Yaw Stability 1'? Only 'Cn_R - Yaw Rate= -240' and 'Cy_R - YawRate=430' can be found.

Hey guys, thank you for answering. As I wrote (after changing Yaw) 'now it works', I only meant the taxiing. I never saw a 'unchanged' default FSX Piper J3 Cub flying as an AI. They never found the runway taxiing in the surroundings unable to make more than a little curve. Some freeware developer are using such Pipers in their sceneries and I think they never tested the flight of a Piper J3 Cub:p The pilotable Piper i have never tried to change the aircraft.cfg, there was no need to do so. So I made a non pilotable Piper and changed the aircraft.cfg as I said. Now the taxiing worked and I could see the Piper flying. @Hans Yes i was not sure the aircraft flies correctly and indeed it seems the AI -pilot was drunken gravely. Sometimes it works normally sometimes it enormous sways. Nevertheless it reached the destination airport, nearly perfect landing, taxiing correct to the parking spot and this makes me content. I don't know what I could do to make it better. Again I have to say this concerns only the FSX version!!

Hey Chuck and Hans, this case is very interesting for me. I have tried to change the contact points for the default FSX Piper_3 Cub for AI-use, but gave up as somebody told me this would be impossible. Now I changed the [contact_points] point.0=1, -15.00, 0.0, -1.05, 1800, 0, 0.238, 60.0, 0.300, 2.5, 0.40, 0.0, 0.0, 0.0, 0.0, 0.0 (this is default) to [contact_points] point.0=1, -10.00, 0.0, -2.55, 1800, 0, 0.238, 60.0, 0.300, 2.5, 0.40, 0.0, 0.0, 0.0, 0.0, 0.0 Perhaps this wasn't the right way because there was no difference:( Then I changed the 'empty_weight_yaw_MOI' from default 642.2 to 3000 as I have done at some other aircrafts. And now it works! :) Maybe your way works only for FS9 and I play with FSX.

Very nice, a DHC-6-200 Twin Otter.

from the MCDonnell website: Douglas DC-10 Twin This was a proposed small version with two engines but was never created.

Very nice, looks like my FSX Austrian SuperCub

Are you shure it is your Graphic card? Sometimes it is very tricky to make thumbnails. According to the manual you have to get rid of all disturbing things on your screen. Clean weather, no tips nothing other then slew Mode the right altitude then have the green screen to appear. I myself have sometimes similar difficulties to do the the things right[emoji6] Gesendet von iPhone mit Tapatalk

You are wellcome. Gesendet von iPhone mit Tapatalk