Jim Hall Posted March 14 Share Posted March 14 Sorry to be a bother but my Cessna 172 idle rpm is 680. What should it be and how to get it? Thank you. i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
Hyperdark Posted March 15 Share Posted March 15 680 rpm is about right Link to comment Share on other sites More sharing options...
Jim Hall Posted March 15 Author Share Posted March 15 Okay, thanks. Just seems odd that when idling my plane keeps taxiing. i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
tiger1962 Posted March 15 Share Posted March 15 That can happen if you have a tailwind and/or a downward slope on the apron, taxiway or runway. Tim Wright "The older I get, the better I was..." Xbox Series X, Asus Prime H510M-K, Intel Core i5-11400F 4.40GHz, 16Gb DDR4 3200, 2TB WD Black NVME SSD, 1TB Samsung SATA SSD NVidia RTX3060 Ti 8Gb, Logitech Yoke System, CH Pro Pedals, Acer K272HL 27", Windows 11 Home x64 Link to comment Share on other sites More sharing options...
PhrogPhlyer Posted March 15 Share Posted March 15 This may also occur based on setting in the air.cfg (see Bob Chicilo's flight dynamics article). Always Aviate, then Navigate, then Communicate. And never be low on Fuel, Altitude, Airspeed, or Ideas. Laptop, Intel Core i7 CPU 1.80GHz 2.30 GHz, 8GB RAM, 64-bit, NVIDIA GeoForce MX 130, Extra large coffee-black. Link to comment Share on other sites More sharing options...
davidc2 Posted March 16 Share Posted March 16 16 hours ago, Hyperdark said: 680 rpm is about right I took a look at my RPM's today in the 172, I was just a tad over 600 myself Windows 10 Pro, 32 gigs DDR4 RAM, Nvidia GForce RTX 3070, Intel I7 10700 running at 3.8, with Noctua NH-L9x65, Premium Low-Profile CPU Cooler-HP Reverb G2 for Virtual Reality Link to comment Share on other sites More sharing options...
nsproles Posted March 16 Share Posted March 16 My Cessna 172 idles at 630 rpm and will not start to move on a level runway until the engine is running at around 1100 rpm. Windows 11, GeForce GTX 1660ti; 3.60 gigahertz AMD Ryzen 5 3600 6-Core; Kingston SA2000M81000G SSD; 16 gb RAM; CH yoke; Saitek pedals; Two monitors; TrackIR 3. Link to comment Share on other sites More sharing options...
Jim Hall Posted March 16 Author Share Posted March 16 Mine won't roll to a stop after landing. You gotta use the brakes which is fine, I guess. I forgot if that is so in the real Cessna 172. On the one occasion I flew the real plane, while taxiing back to the ramp, I was wiggling back and forth and my CFI asked me what's up. Oops, I had got used to steering with my toe brakes on the sim. Also in the sim I look mostly at the instruments and not the horizon. I guess when transitioning from sim to the real plane you have to unlearn some bad habits. 1 i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
PhrogPhlyer Posted March 16 Share Posted March 16 4 hours ago, nsproles said: My Cessna 172 idles at 630 rpm and will not start to move on a level runway until the engine is running at around 1100 rpm. Just for comparison, the FSX default 172 idles at 600 rpm and it take 1100-1200 to start rolling. These are pretty close to an actual 172 that idles between 600 and 800 rpm and taxi rpm of 800-1000. Always Aviate, then Navigate, then Communicate. And never be low on Fuel, Altitude, Airspeed, or Ideas. Laptop, Intel Core i7 CPU 1.80GHz 2.30 GHz, 8GB RAM, 64-bit, NVIDIA GeoForce MX 130, Extra large coffee-black. Link to comment Share on other sites More sharing options...
PhrogPhlyer Posted March 16 Share Posted March 16 I've attached a quick reference checklist for the Cessna 172 that may be useful. Happy simming. Always Aviate, then Navigate, then Communicate. And never be low on Fuel, Altitude, Airspeed, or Ideas. Laptop, Intel Core i7 CPU 1.80GHz 2.30 GHz, 8GB RAM, 64-bit, NVIDIA GeoForce MX 130, Extra large coffee-black. Link to comment Share on other sites More sharing options...
Jim Hall Posted March 17 Author Share Posted March 17 Thank you for your replies, much appreciated. i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
jlaurie Posted March 18 Share Posted March 18 Quick fix to stop rolling at idle is to apply the park brake. ASUS Intel core i7-8700 NVIDIA GeForce GTX1070 8Gb DDR4 16G HDD 1TB SSD 256GB (M 2) MSFS2020 Advanced system Link to comment Share on other sites More sharing options...
PhrogPhlyer Posted March 18 Share Posted March 18 1 minute ago, jlaurie said: Quick fix to stop rolling at idle is to apply the park brake. Oh stop it, a simple solution!?! Where's the fun in that? Always Aviate, then Navigate, then Communicate. And never be low on Fuel, Altitude, Airspeed, or Ideas. Laptop, Intel Core i7 CPU 1.80GHz 2.30 GHz, 8GB RAM, 64-bit, NVIDIA GeoForce MX 130, Extra large coffee-black. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now