jorgen.s.andersen Posted November 17, 2020 Share Posted November 17, 2020 And I don't believe (from the information we have so far) it's a hardware issue, rather an issue with Windows 10 or a driver issue. With "driver issue" I do not mean graphics driver, rather the drivers for the various items on the motherboard etc etc. For updating those I use a tool called Driver Booster, which comes in a freeware and a payware version, and which I liked so much that I plonked down folding money for the payware version. But there are many other tools out there that will do the same for you. Jorgen Link to comment Share on other sites More sharing options...
pcohen Posted November 17, 2020 Author Share Posted November 17, 2020 (edited) And I don't believe (from the information we have so far) it's a hardware issue, rather an issue with Windows 10 or a driver issue. With "driver issue" I do not mean graphics driver, rather the drivers for the various items on the motherboard etc etc. For updating those I use a tool called Driver Booster, which comes in a freeware and a payware version, and which I liked so much that I plonked down folding money for the payware version. But there are many other tools out there that will do the same for you. Jorgen Hello again Jurgen. Looked Interesting tool called Driver Booster? but Message: Unable to Download. But did try this:- Press Windows key + R to invoke the Run dialog. In the Run dialog box, type services.msc and hit Enter to open Services. In the Services window, scroll and locate the Windows Installer service. Double-click on the entry to open its properties window. In the properties window, on the General tab, click the dropdown on Startup type and select Automatic. Next, move to the Service status section. Click the Start button in order to enable the service. To disable this specific service, click the Stop button. Click Apply > OK to save changes. But when I get to the line that says Startup type and select Automatic, it says Manual and is greyed out so it cannot be changed. Any Ideas on this please? Will Try again in a while. Thanks Paul. Edited November 17, 2020 by pcohen more info Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
pcohen Posted November 17, 2020 Author Share Posted November 17, 2020 I'm now at the Stage where everything seems to be working and running fine, However. I still cannot get around the Activation Issue. everything runs fine for about 30 Minutes then Sim ends with Activation error. Thanks Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
pcohen Posted November 17, 2020 Author Share Posted November 17, 2020 Hi everybody, thanks for Time & Patience. I think This is the only thing I seem to be stuck with now ? Press Windows key + R to invoke the Run dialog. In the Run dialog box, type services.msc and hit Enter to open Services. In the Services window, scroll and locate the Windows Installer service. Double-click on the entry to open its properties window. In the properties window, on the General tab, click the dropdown on Startup type and select Automatic. Next, move to the Service status section.Click the Start button in order to enable the service. To disable this specific service, click the Stop button. Click Apply > OK to save changes. When I get to the Startup type and select Automatic line, I cannot change it because It's set on Manual and greyed out so am unable to change It to Automatic. Anymore help Please? Thanks Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
pcohen Posted November 18, 2020 Author Share Posted November 18, 2020 Can anybody please tell me how to get round this Please. Press Windows key + R to invoke the Run dialog. In the Run dialog box, type services.msc and hit Enter to open Services. In the Services window, scroll and locate the Windows Installer service. Double-click on the entry to open its properties window. In the properties window, on the General tab, click the dropdown on Startup type and select Automatic. Next, move to the Service status section.Click the Start button in order to enable the service. To disable this specific service, click the Stop button. Click Apply > OK to save changes. When I get to the Startup type and select Automatic line, I cannot change it because It's set on Manual and greyed out so am unable to change It to Automatic. Anymore help Please? Thanks Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
HoratioWondersocks Posted November 18, 2020 Share Posted November 18, 2020 Hello again I don't know if this will help or not (you may have tried already) But I typed "how do I register FSX " into Google and it came up with all sorts of info that might ? Help. As an Fs9 user I can't be sure ,but it may be worth a look at (some of the advice comes from Microsoft ) Andy Link to comment Share on other sites More sharing options...
pcohen Posted November 18, 2020 Author Share Posted November 18, 2020 Hi Andy, thanks for that, will give it a try. Regards Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
CRJ_simpilot Posted November 19, 2020 Share Posted November 19, 2020 This is probably due to Windows BS 10. You need to have someone tell you how to run FSX in 10 because I know there's a lot of work to do so. You should have stated you were running 10 from the begin with. Also, are you installing to the programs folder? DON'T DO THIS! Install to the root of C drive only. C:\FSX No one seems willing to answer the guy's question on where in the registry is the FSX entry. Use this tool: https://flyawaysimulation.com/downloads/files/18872/fsx-tweakfs-registry-utility-v121/ Now, the next time you uninstall FSX use RevoUninstaller instead. Be careful on the registry entries it wants to delete. Make absolutely sure they are FSX related. https://www.revouninstaller.com/products/revo-uninstaller-free/ By in large, you have a Winblows 10 issue. Read through this guide: https://windowsreport.com/microsoft-flight-simulator-x-windows-10/ Yyou may need to install DirectX 9c. This will NOT downgrade DX, it adds to it. OOM errors? Read this. What the squawk? An awesome weather website with oodles of Info. and options. Wile E. Coyote would be impressed. Link to comment Share on other sites More sharing options...
mallcott Posted November 19, 2020 Share Posted November 19, 2020 This is probably due to Windows BS 10. You need to have someone tell you how to run FSX in 10 because I know there's a lot of work to do so. You should have stated you were running 10 from the begin with. Also, are you installing to the programs folder? DON'T DO THIS! Install to the root of C drive only. C:\FSX No one seems willing to answer the guy's question on where in the registry is the FSX entry. Use this tool: https://flyawaysimulation.com/downloads/files/18872/fsx-tweakfs-registry-utility-v121/ Now, the next time you uninstall FSX use RevoUninstaller instead. Be careful on the registry entries it wants to delete. Make absolutely sure they are FSX related. https://www.revouninstaller.com/products/revo-uninstaller-free/ By in large, you have a Winblows 10 issue. Read through this guide: https://windowsreport.com/microsoft-flight-simulator-x-windows-10/ Yyou may need to install DirectX 9c. This will NOT downgrade DX, it adds to it. There's nothing in Win 10 that precludes FSX, no matter CRJ simpilots persistent protestations. You're back at the same point as you were when first you posted. You need to LISTEN to use when we tell you what you need to do. Delete FSX Registry registration EXACTLY as advised. DO NOT delete anything else. Link to comment Share on other sites More sharing options...
pomak249 Posted November 20, 2020 Share Posted November 20, 2020 There's nothing in Win 10 that precludes FSX, no matter CRJ simpilots persistent protestations. You're back at the same point as you were when first you posted. You need to LISTEN to use when we tell you what you need to do. Delete FSX Registry registration EXACTLY as advised. DO NOT delete anything else. FSX has run ok from day one of Windows 10 on my PC - I too dont understand the constant threads that FSX wont run on Win10. IT DOES!! i5 4690 (350mhz) with Arctic Cooler, 32GB Patriot Viper 1600mhz, ASUS Rock H97 performance MoBo, MSI Ventus XS OC 1660GTX 6GB, Windows10 64bit, 256GB and 500GB Crucial SSDs Link to comment Share on other sites More sharing options...
jorgen.s.andersen Posted November 20, 2020 Share Posted November 20, 2020 When I lived in the US, I ran FSX Acceleration on Windows XP - no problem there, as I think all XP fans will agree (Drumroll - enter Mr. Zippy from stage right). Then I moved to the Philippines, and after a couple of years I got a computer with Windows 8 and ran FSX Acceleration on that just fine. Upgraded Windows to first 8.1 and then 10, and never saw any issues. But - I "cheated" and did not install FSX to the default location in the first place. This thanks to the advice I found by reading up on it in these august forums. Instead, I got two 1 TB HDDs and installed FSX to one and the scenery (I knew there would be a lot of that) to the other. Apart from the fact that I now have a much faster computer, have cloned my OS HDD and the two simulator HDDs to SSDs, and added a third SSD for P3D, no changes in the basic layout. All the simulators co-exist peacefully and run just fine. Jorgen Link to comment Share on other sites More sharing options...
pcohen Posted November 20, 2020 Author Share Posted November 20, 2020 Hi Jorgen, thanks for reply. yet again trying to sort another Problem? Got on the Phone to Microsoft Yesterday re Activation problem with FSX. Spoke to what I assumed was an engineer and was told by Microsoft that they are not responsible For Activation, and that this was down to the Computer Manufacturer ( In this case PC Specialist ). Contacted PC Specialist and was told there not responsible for Microsoft Software. Beginning to wonder whether I should be carrying on with Microsoft Flight Simulator or not as I seem to be beating my head against a brick wall? Regards Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
pcohen Posted November 20, 2020 Author Share Posted November 20, 2020 Hi pomak249, thanks for reply. I Know it does also, have had every Microsoft flight Simulator since FS98 through to FSX. All worked on my previous Packard Bell Computer with no problem. (shouldn't have given it to my Daughter till I new this One was working OK ) Have not had a Games Computer before but am assuming the basic setups are the same? Many thanks Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
mallcott Posted November 20, 2020 Share Posted November 20, 2020 Hi Jorgen, thanks for reply. yet again trying to sort another Problem? Got on the Phone to Microsoft Yesterday re Activation problem with FSX. Spoke to what I assumed was an engineer and was told by Microsoft that they are not responsible For Activation, and that this was down to the Computer Manufacturer (In this case PC Specialist). Contacted PC Specialist and was told there not responsible for Microsoft Software. Beginning to wonder whether I should be carrying on with Microsoft Flight Simulator or not as I seem to be beating my head against a brick wall? Regards Paul. Have you tried removing JUST the activation? https://www.flightsim.com/vbfs/showthread.php?318953-How-To-Activate-FSX-and-Accelerator-After-A-Fresh-Install-On-Windows-10 Apart from incompetence, except fpr the known error, there is no reason your installed copy should not reinstall! Link to comment Share on other sites More sharing options...
pomak249 Posted November 20, 2020 Share Posted November 20, 2020 Hi Paul apologies that wasnt intended for you just a prod at all the anti windows 10 crowd i5 4690 (350mhz) with Arctic Cooler, 32GB Patriot Viper 1600mhz, ASUS Rock H97 performance MoBo, MSI Ventus XS OC 1660GTX 6GB, Windows10 64bit, 256GB and 500GB Crucial SSDs Link to comment Share on other sites More sharing options...
jorgen.s.andersen Posted November 20, 2020 Share Posted November 20, 2020 Paul, In all honesty you should check with Steam every day, and look around for offers on FSX Steam Edition. They are bound to be there, especially now with Thanksgiving coming up in the US. It will: 1. Set you back maybe the equivalent of 8-10 USD, 2. Have all the Acceleration updates plus a couple of other fixes already installed, and (drumroll) 3. Get rid of all the activation troubles you have had. But I must say I am very surprised by hearing about a Microsoft Support "employee" saying that activation was not the responsibility of Microsoft - it most certainly is! If you have to go down that route in the future and get that sort of response, then demand to talk to this person's supervisor and explain the situation. How on earth can a computer manufacturer (or a store) have access to Microsoft's activation codes? Just my 10 cents (Euro or US) worth.... Jorgen Link to comment Share on other sites More sharing options...
CRJ_simpilot Posted November 20, 2020 Share Posted November 20, 2020 There's nothing in Win 10 that precludes FSX, no matter CRJ simpilots persistent protestations. You're back at the same point as you were when first you posted. You need to LISTEN to use when we tell you what you need to do. Delete FSX Registry registration EXACTLY as advised. DO NOT delete anything else. FSX has run ok from day one of Windows 10 on my PC - I too dont understand the constant threads that FSX wont run on Win10. IT DOES!! I did not say FSX wouldn't run in Windows 10. Go over my post again and read really, really carefully. Here, I'll point out the most pertinent. This is probably due to Windows BS 10. You need to have someone tell you how to run FSX in 10 because I know there's a lot of work to do so. and By in large, you have a Winblows 10 issue. Read through this guide: https://windowsreport.com/microsoft-flight-simulator-x-windows-10/ See how I actually pointed to a guide on how to get FSX to work in Windows 10? Does this somehow project malfeasance on my part for not being the Windows 10 fan boy that I outta? Or actually trying to help the OP get this thing going without making useless points about personal convection on how Windows 10 will work with FSX and not adding anything here to the thread? OOM errors? Read this. What the squawk? An awesome weather website with oodles of Info. and options. Wile E. Coyote would be impressed. Link to comment Share on other sites More sharing options...
CRJ_simpilot Posted November 20, 2020 Share Posted November 20, 2020 (edited) If this is straight up an activation issue, never mind how you mentioned the black cursor issue and the tool bar at the top issue, then use that tool I gave a link to from Flyawaysimulation to find the registry entries and delete the values. BUT! Before you do that create a system restore point. If you're not comfortable around the registry, I can create a batch file that you can just double click to delete the entries. I just need you to give me the registry paths shown in that tool from Flyawaysimulation. Edited November 20, 2020 by CRJ_simpilot OOM errors? Read this. What the squawk? An awesome weather website with oodles of Info. and options. Wile E. Coyote would be impressed. Link to comment Share on other sites More sharing options...
pcohen Posted November 20, 2020 Author Share Posted November 20, 2020 Hi CRJ_simpilot , many thanks for reply. Can you please supply a Link for the tool from Flyawaysimulation please all I can seem to find is what looks like another Flight Simulator to Download. Many, many thanks Regards Paul. Windows 10 2020. Processor: AMD Ryzon 5 3600 6-Core Processor 3.59 GHz. Installed memory (RAM): 16.0 GB. System type: 64-bit Operating System X64-based processor. Link to comment Share on other sites More sharing options...
mrzippy Posted November 20, 2020 Share Posted November 20, 2020 https://flyawaysimulation.com/downloads/files/18872/fsx-tweakfs-registry-utility-v121/ BE CAREFUL! :eek: Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
loki Posted November 20, 2020 Share Posted November 20, 2020 But I must say I am very surprised by hearing about a Microsoft Support "employee" saying that activation was not the responsibility of Microsoft - it most certainly is! If you have to go down that route in the future and get that sort of response, then demand to talk to this person's supervisor and explain the situation. How on earth can a computer manufacturer (or a store) have access to Microsoft's activation codes? Product activation for FSX is very much Microsoft's responsibility. I have a feeling that there was something lost in the translation somewhere and the MS support person thought they talking about Windows activation. These days Windows OEM activations can be tied to the BIOS/UEFI and support, at least the first level, would be the responsibility of the OEM. Part of the problem on the MS side is that FSX is no longer an officially supported product so some MS support people are quick to say they can't do anything. One needs to make sure they are calling the MS product activation support line, not general support, and be very explicit about FSX product activation, not Windows or anything else. With the regular Steam sales and the common issues with FSX installations and activations (which happened well before Windows 10 too), there is something to be said for just buying the Steam Edition. Saving a headache or two could be well worth the $5-$10 price. Link to comment Share on other sites More sharing options...
jorgen.s.andersen Posted November 21, 2020 Share Posted November 21, 2020 Loki, permit me a quote: "Saving a headache or two could be well worth the $5-$10 price." I'd probably gladly pay more to get rid of a headache and waste of time and effort! Jorgen Link to comment Share on other sites More sharing options...
Cole Posted November 22, 2020 Share Posted November 22, 2020 Hi Mr Zippy, long time no hear, many thanks for reply. BUT! How do I get around this One: Microsoft Flight Simulator X: Acceleration requires the English version of flight Simulator X. Have played this more times than I can remember and has never been a Problem before, but now the Acceleration Disk will not load? Many thanks Paul. I dumped my long standing FSX program because it was beginning to crash my PC. Too much in there I guess. Any way, uninstalled all and went back with my Deluxe Ver disk (2) first and activated it with the MS code. Then without any SP1 or 2 installs, added Acceleration Disk (1). Got the Error code for Activation. Did just as Mr. Zippy has suggested and opened FSX to run and got he activations notice for Acceleration. Added code and install went fine from there. Link to comment Share on other sites More sharing options...
RobPreston Posted November 22, 2020 Share Posted November 22, 2020 I have encountered exactly the same problem. I have FSX Gold and have been happily using it with Windows 10. But it has now started telling me, on start-up, that there is an error. And, when I override that and fly, I am told after half an hour that my time is up. Is this Microsoft's way of getting us to buy their latest flight simulator programme? Or is there a solution? Link to comment Share on other sites More sharing options...
mrzippy Posted November 22, 2020 Share Posted November 22, 2020 I have encountered exactly the same problem. I have FSX Gold and have been happily using it with Windows 10. But it has now started telling me, on start-up, that there is an error. And, when I override that and fly, I am told after half an hour that my time is up. Is this Microsoft's way of getting us to buy their latest flight simulator programme? Or is there a solution? If you read through the whole thread, you will see that your solution was provided. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now