Prostock Posted March 9, 2020 Share Posted March 9, 2020 I dl'd the Fed-x DC-10-30F and the Flap Gauge is not reading correctly. I made a similar post a while ago & tried to edit the config as advised in that post. I opened my 738's config and copied the text from [flaps.0] and that didn't work. (Disregard Highlighted area) The gauge reads 10-15 in 0 position as shown. Before I go any further, figured I'd ask here. How to correct this so when set at zero degree's, gauge reads zero? Thanks Link to comment Share on other sites More sharing options...
mrzippy Posted March 9, 2020 Share Posted March 9, 2020 (edited) Keep in mind that when an aircraft (not a 737) uses the 737 panel, it will probably never match up. I fly to TomDC10-10. tomdc10.zip It also has a DC10-30. This has a custom panel that displays 3 engines and correct flap positions on the indicator and includes a VC. My best advice is to avoid aircraft where the "developer" is too lazy to have a custom panel for his model and a 2D panel only. Edited March 9, 2020 by mrzippy Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
mallcott Posted March 9, 2020 Share Posted March 9, 2020 I dl'd the Fed-x DC-10-30F and the Flap Gauge is not reading correctly. I made a similar post a while ago & tried to edit the config as advised in that post. I opened my 738's config and copied the text from [flaps.0] and that didn't work. (Disregard Highlighted area) The gauge reads 10-15 in 0 position as shown. Before I go any further, figured I'd ask here. How to correct this so when set at zero degree's, gauge reads zero? Thanks Throw away that 738 panel and find a real DC-10 panel... Link to comment Share on other sites More sharing options...
Prostock Posted March 9, 2020 Author Share Posted March 9, 2020 Thanks Mr. Zippy - I thought the easy fix would be just to follow the advice given in my previous post about Gauge not working properly. I also have the tomdc10 pack. I have to do some digging around, see if I make one out of the two. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now