masterboy6xx Posted March 17, 2019 Share Posted March 17, 2019 i was flying one day to seattle and i saw this huge and tall building in front of the airport i used different scenery but the building is there anyone can help with this? to get rid of that Link to comment Share on other sites More sharing options...
mrzippy Posted March 17, 2019 Share Posted March 17, 2019 Besides KSEA scenery, what else do you have installed? Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Downwind66 Posted March 17, 2019 Share Posted March 17, 2019 (edited) Talk about a short field takeoff over an obstacle! :rolleyes: Landing is a "piece of cake!" (unless that building is planted in the middle of the property, hard to tell if the building is beyond the end of the runway?) Either way, it is a problem to be dealt with! Rick :cool: Edited March 17, 2019 by Downwind66 Link to comment Share on other sites More sharing options...
StringBean Posted March 17, 2019 Share Posted March 17, 2019 This may be hard to believe, that building is coming from a scenery addon that most likely has nothing to do with Seattle. To eliminate it you need to do some process of elimination testing. Deactivate your addons in blocks until the building goes away. You will eventually determine which addon is the offender, we can then help you fix it. The fastest way to test is to deactivate half of you addons. If the building goes away reactivate half of that first block, if it doesn't go away, deactivate half of the remaining. If you have any addons for airports in India, I would start looking there. peace, the Bean WWOD---What Would Opa Do? Farewell, my freind (sp) Never argue with idiots. They drag you down to their level and beat you with experience Link to comment Share on other sites More sharing options...
Markg55 Posted March 17, 2019 Share Posted March 17, 2019 What's with the size of the aircraft? Link to comment Share on other sites More sharing options...
mrzippy Posted March 17, 2019 Share Posted March 17, 2019 What's with the size of the aircraft? Looks normal for an aircraft in the air! It's the floating building the OP is trying to fix. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
UPHILL3 Posted March 17, 2019 Share Posted March 17, 2019 As a last resort ONLY: If you have these two original files somewhere: Save your current TEXTURE and SCENERY files outside of the FSX app - then delete them in FSX and re-install those original files to FSX - see if that solves your problem. I had to do that to fix a large area of badly messed-up Seattle area scenery a while back, esp. Port Angeles... Link to comment Share on other sites More sharing options...
Markg55 Posted March 17, 2019 Share Posted March 17, 2019 Oh my bad thought it was the ground with parking brakes on. Link to comment Share on other sites More sharing options...
masterboy6xx Posted March 17, 2019 Author Share Posted March 17, 2019 nothing else i only leave the default airport to see if that fix the problem but still there even nothing but the default is there Link to comment Share on other sites More sharing options...
masterboy6xx Posted March 17, 2019 Author Share Posted March 17, 2019 maybe is something in the scenry of the fsx but i have a few third party airports but ill check india but this appear like 2 years ago so everything was ok a lot of sceneries from here Link to comment Share on other sites More sharing options...
N33029 Posted March 18, 2019 Share Posted March 18, 2019 Talk about a short field takeoff over an obstacle! :rolleyes: Landing is a "piece of cake!" (unless that building is planted in the middle of the property, hard to tell if the building is beyond the end of the runway?) Either way, it is a problem to be dealt with! Rick :cool: That building does look about halfway down the runway. And Port Angeles is not in the vicinity of Seattle - it's 61 NM away. Sean 'Glichy' controls or switches and don't want to pay for new ones? Read on... You can bring a controller back to life by exercising it through it's full range of motion or from maximum to minimum and back again 50 times. I had a Logitech joystick that gave left rudder without touching it but turning it 50X fixed it. Link to comment Share on other sites More sharing options...
UPHILL3 Posted March 18, 2019 Share Posted March 18, 2019 N33029: Thanks for the geography lesson: But I also had problems in the City of Seattle proper and beyond. mainly floating buildings all over. And it extended way out to Port Angeles which was unrecognizable and covered with grass... Like I said, fixed it by re-installing the original the FSX Scenery folder... Link to comment Share on other sites More sharing options...
Enko Posted March 18, 2019 Share Posted March 18, 2019 Download SimpleAirportScanner from scruffy duck and do a search for KSEA. If there are duplicates, start disabling the one with the lower layer number see if that helps. Link to comment Share on other sites More sharing options...
il88pp Posted March 18, 2019 Share Posted March 18, 2019 (edited) This is not because of a duplicate airport. If it were a duplicate airport install, the buildings from both airports would be scattered through each other. But they would all be nicely touching the ground, not floating. They would also not be huge. This object is from some different addon AIRPORT in a different area of the world. Disable your addon airports one by one to find out which one includes that object. THen either properly remove the whole airport. Or just the object library that has the object in it. Do not overwrite or delete your main scenery folders. In there payware NON-airport scenery addons are installed, and overwriting would cause problems. (such as orbx, scenerytech, and your updated cloud textures.) Also traffic from woai for example will be in there, and you don't want to lose that. However, some addon AIRPORTS make you install one or two new files in the main scenery folder. (new filenames, so overwriting with a default file won't work.) one such file could cause this too. So, do not only de-activate your addon airports one by one. Also, for each addon airport look up the .zip file, and read the install instructions in the readme.txt file to check if the instructions say something about placing a file in the main scenery folder or main texture folder. If so, find those files and temporarily uninstall them (by copying such a file to a folder on the desktop while fsx is shut down. Edited March 18, 2019 by il88pp [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Art_P Posted March 18, 2019 Share Posted March 18, 2019 That is not the default KSEA airport scenery in the screen shots. The building(wall) looks like the barriers placed in trial payware airport sceneries which can be removed by paying for the scenery. Asus Prime Z490-P motherboard, Intel i7-10700K CPU, 32GB DDR4 3200 memory, GeForce RTX 2070-8GB video, 1TB M.2 SSD, Windows 10-64 bit, Acer 23"WS LCD and Benq 19" LCD, Logitech Flight Yoke, Thrustmaster Pedals, Logitech Extreme 3D Pro Joystick, TrackIR 5, MSFS Deluxe and FSX Deluxe, UTX-USA2, UTX-TAC, GEX-NA, ASN, WOAI Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now