Clutch Cargo Posted November 17, 2019 Share Posted November 17, 2019 Pilots - I recently d/l a good ol' posky 737-800 (that also works in P3Dv4), and there is an issue where Engine 2 reversers continue to deploy and retract. For those who have the Logitech/Saitech throttle quadrant, if I manually deploy them they activate as expected (I have set my throttle "buttons" to deploy them via FSUIPC) Then when I begin to reverse direction of the throttle (increasing power), the reversers close as expected but as I continue to increase the reversers keep "popping" open. I add more throttle and they start to close then pop open again?!? More thrust start closing - pause the throttle position start to open again - repeats all the way up until full thrust. So I did reverse my throttle settings changing #1 as #2 and #2 to #1 yet it still happens to engine #2. Engine #1 always works correctly. Do not have this issue with other aircraft so I am tending to believe it is not a hardware issue. Just asking if anyone has come across this issue in the past? Maybe something I can check in the aircraft.cfg file? Thx, Clutch Link to comment Share on other sites More sharing options...
mrzippy Posted November 17, 2019 Share Posted November 17, 2019 (edited) Hi, Marcus! I also fly the POSKY 737-800 but don't have the throttle quadrant you speak of. I also don't add thrust while the reversers are deployed. I might try that next flight. I normally just hit F1 to kill the reversers while coming to a stop on the runway. I'll try a test where I give full power for takeoff then bring the thrust levers to idle and engage reversers to slow down and then try adding power to watch the reaction. UPDATE: They worked as expected. Adding thrust while deployed, they both retracted and stayed in position until I went back to idle and engaged reverse thrust again. Don't know what your problem might be? Edited November 17, 2019 by mrzippy Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Clutch Cargo Posted November 17, 2019 Author Share Posted November 17, 2019 Yea, I don't use the keyboard's F1/F2 but that reminds me it almost appears like a selection conflict so I will also check all my hardwares to ensure some other button has been selected to deploy reverser. Link to comment Share on other sites More sharing options...
Clutch Cargo Posted November 18, 2019 Author Share Posted November 18, 2019 Looks like it was duplication/mixed up FSUIPC.ini file. Cleaned out some old settings/aircraft and it appears to be working correctly in case anyone else has the same issue. :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now