Jump to content

SOH-C1A Grumman Tracker by Shupe


vaseycr

Recommended Posts

Posted

Have recently started flying this wonderful aircraft. After about 5-8 minutes both engines quit following a fire warning. I am conscious of the need to reduce manifold pressure & rpm while in cruise but still the fire warnings persist. Can't find a suitable place to post my issue over at Sim Out House so I post here in hopes that someone can offer a solution.

 

Thank you,

 

CRV

Posted

I cannot help you other than to suggest you post in the FS9 forum at SOH, where Milton will see it.

 

peace,

the Bean

WWOD---What Would Opa Do? Farewell, my freind (sp)

 

Never argue with idiots.

They drag you down to their level and beat you with experience

Posted

I would start a new Thread over at SOH regarding your issue. Milton's been busy updating a few of his older Models, and has been posting regularly there. I'm sure he'll see your Thread and get you squared away.

 

Alan :pilot:

"I created the Little Black Book to keep myself from getting killed..." -- Captain Elrey Borge Jeppesen

AMD 1.9GB/8GB RAM/AMD VISION 1GB GPU/500 GB HDD/WIN 7 PRO 64/FS9 CFS CFS2

COSIM banner_AVSIM3.JPG

Posted

I had this version and did 2 test flights. The first ended in flames after 5 minutes. I also made sure to lower the RPM's and Manifold pressure, but come to find out, not nearly low enough. 2nd test flight went OK.

 

This is from Milton's OOPS README file.

 

Normal engine operation:

=======================================================

1450-2500 RPM continuous operation 18-47.5" MAP

2700 RPM military power (max 30 mins) 52.0" MAP

2800 RPM take-off power (max 5 mins) 56.5" MAP

Still thinking about a new flightsim only computer!  ✈️

Posted

OP,

 

Did you ever post over at SOH?

"I created the Little Black Book to keep myself from getting killed..." -- Captain Elrey Borge Jeppesen

AMD 1.9GB/8GB RAM/AMD VISION 1GB GPU/500 GB HDD/WIN 7 PRO 64/FS9 CFS CFS2

COSIM banner_AVSIM3.JPG

Posted

Did not post at SOH because I tried a different panel (I was using a non stock panel) & the problem was resolved.

 

CRV

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...