Jim Hall Posted February 26, 2023 Share Posted February 26, 2023 When slowly turning the trim wheel the movement jumps a level up or down instead of a smooth continuous movement. The same at various sensitivities and nulls. Is this a characteristic of this wheel? i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
PhrogPhlyer Posted February 26, 2023 Share Posted February 26, 2023 13 minutes ago, Jim Hall said: movement jumps a level up or down instead of a smooth continuous movement Is this happening with all aircraft or just certain ones? I have seen this occurrence with other trim methods but only on specific aircraft, which might be how their flight dynamics are set up. Always Aviate, then Navigate, then Communicate. And never be low on Fuel, Altitude, Airspeed, or Ideas. Laptop, Intel Core i7 CPU 1.80GHz 2.30 GHz, 8GB RAM, 64-bit, NVIDIA GeoForce MX 130, Extra large coffee-black. Link to comment Share on other sites More sharing options...
Jim Hall Posted February 26, 2023 Author Share Posted February 26, 2023 Much obliged Phrog. I tried three different airplanes and all stepped in movement. I then replaced the newer Flight Velocity Pro with the old Saitek trim wheel and got pure, sweet, and smooth movement. These are two different wheels with different components. Maybe the Pro was made for FS2020? One more thing to remember. i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
Mark Hurst Posted February 28, 2023 Share Posted February 28, 2023 On 2/26/2023 at 3:12 PM, Jim Hall said: When slowly turning the trim wheel the movement jumps a level up or down instead of a smooth continuous movement. The same at various sensitivities and nulls. Is this a characteristic of this wheel? Assuming you have the older version, it looks like you need to change settings in aircraft.cfg to adjust it for different aircraft. Look at the bottom of this page for the specifics. If you have the later version, it looks like it works differently. MarkH Link to comment Share on other sites More sharing options...
Jim Hall Posted March 5, 2023 Author Share Posted March 5, 2023 Thank you, Mark. i7-7700k @ 4.2 Ghz, 16 GB DDR4/3000,2280 SSD M.2,Genome II Case,Nvidia GTX 1080 rear exhaust, Samsung 40" HDTV & Two 24" HP side monitors. Redbird Alloy yoke, pedals, and throttle. A single Saitek Instrument Panel and Cessna trim wheel. Klipsch ProMedia 2.1 speakers. Windows 10 64 bit. 58 measured Mbps. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now