Prostock Posted September 16, 2018 Share Posted September 16, 2018 (edited) FSX-SE Windows 10 - I downloaded KLAX Airport today from Rikoooo.com & took a look around. Great scenery but was a bit disappointed at the lack of AI and activity around the airport, I only say one 747 parked off runway. I have my settings on Full 100% of everything with good frame rates. My question: Is there an AI download available that will populate all airports or selective airports? I have not found any and don't know where else to look. If you know where I can download please provide a link, much appreciated. Thank you for any help. QUESTION POSTED at Rikoooo.com also. Edited September 16, 2018 by Prostock Link to comment Share on other sites More sharing options...
Prostock Posted September 17, 2018 Author Share Posted September 17, 2018 Does anyone have suggestions for adding AI ? I have no idea how to do it. Post a link to download if you can help. Thanks Link to comment Share on other sites More sharing options...
CRJ_simpilot Posted September 18, 2018 Share Posted September 18, 2018 WOAI would do it. But a lot of their flight plans are in FS2004 format so you'll need to convert the plans to FSX format with AIFP. I wouldn't crank the AI slider all the way to the right though. 45%-50% is good enough. Go to the library and search for aifp2121.zip Enter KLAX. http://www.world-of-ai.com/airports.php OOM errors? Read this. What the squawk? An awesome weather website with oodles of Info. and options. Wile E. Coyote would be impressed. Link to comment Share on other sites More sharing options...
il88pp Posted September 18, 2018 Share Posted September 18, 2018 https://www.flightsim.com/vbfs/showthread.php?277857-How-to-install-World-of-AI-flight-plans-and-covert-them-for-FSX [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Prostock Posted September 18, 2018 Author Share Posted September 18, 2018 WOAI would do it. But a lot of their flight plans are in FS2004 format so you'll need to convert the plans to FSX format with AIFP. I wouldn't crank the AI slider all the way to the right though. 45%-50% is good enough. Go to the library and search for aifp2121.zip Enter KLAX. http://www.world-of-ai.com/airports.php Thank you for the reply and link. I have allot of reading and learning to do with this option. I was hoping it was a simple operation, cut and paste here and there. Not so at first glance. Thank you again. Link to comment Share on other sites More sharing options...
Prostock Posted September 18, 2018 Author Share Posted September 18, 2018 WOAI would do it. But a lot of their flight plans are in FS2004 format so you'll need to convert the plans to FSX format with AIFP. I wouldn't crank the AI slider all the way to the right though. 45%-50% is good enough. Go to the library and search for aifp2121.zip Enter KLAX. http://www.world-of-ai.com/airports.php When I searched the library for the zip file. It comes up with 16 choices which none are KLAX. Which do I choose? https://www.flightsim.com/vbfs/fslib.php?searchid=66338393 Link to comment Share on other sites More sharing options...
mrzippy Posted September 18, 2018 Share Posted September 18, 2018 When I searched the library for the zip file. It comes up with 16 choices which none are KLAX. Which do I choose? https://www.flightsim.com/vbfs/fslib.php?searchid=66338393 After entering KLAX into the IACO box, this is the list of all airlines that visit KLAX! Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Prostock Posted September 18, 2018 Author Share Posted September 18, 2018 WOAI would do it. But a lot of their flight plans are in FS2004 format so you'll need to convert the plans to FSX format with AIFP. I wouldn't crank the AI slider all the way to the right though. 45%-50% is good enough. Go to the library and search for aifp2121.zip Enter KLAX. http://www.world-of-ai.com/airports.php This is what I've done so far and nothing has worked. Downloaded WOAI woains24.zip from HERE: http://www.world-of-ai.com/allpackages.php Downloaded the one DATED: 13 DEC 2006. Went to http://www.world-of-ai.com/airports.php and entered KLAX Search took me to this result: 77 packages visiting KLAX : (Click the link to go to the package page) Clicked on Delta Airlines: That took me to this page: http://www.world-of-ai.com/allpackages.php#Delta%20Air%20Lines Decided just to try COLBOLT so Downloaded Release Date 27 JULY 2017 AVSIM Clicked & Opened WAOI Installer. Followed directions within readme file which is the same as IL88 posted. Got to step 4 and got the dreaded RED X - I tried to post a picture but can't make the file small enough. It reads as follows: UNHANDLED EXCEPTION HAS OCCURRED IN YOUR APPLICATION. IF YOU CLICK CONTINUE. THE APPLICATION WILL IGNORE THIS ERROR AND ATTEMPT TO CONTINUE. IF YOU CLICK QUIT THE APPLICATION WILL CLOSE. I clicked Continue: Cursor just spins and spins. I let it spin for an hour then closed the application. ERROR ALSO READS: Could not load file or assembly. 'IC SharpCode. SharpZipLib. Version=0.84.0 Culture=neutral PublicKeyToken=1b03e6acf1164f73' or one of it's dependencies. The system can not find the file specified. PLEASE HELP ME. Thank you. Link to comment Share on other sites More sharing options...
Prostock Posted September 18, 2018 Author Share Posted September 18, 2018 After entering KLAX into the IACO box, this is the list of all airlines that visit KLAX! [ATTACH=CONFIG]204943[/ATTACH] Please see my latest post below yours. Also, how do you post screen shot like the one you posted? When I go to advanced & try to post a picture, the files are usually too large. Thanks Link to comment Share on other sites More sharing options...
StringBean Posted September 18, 2018 Share Posted September 18, 2018 ERROR ALSO READS: Could not load file or assembly. 'IC SharpCode. SharpZipLib. Version=0.84.0 Culture=neutral PublicKeyToken=1b03e6acf1164f73' or one of it's dependencies. The system can not find the file specified. http://www.world-of-ai.com/forum/index.php?topic=6419.0 Last question. peace, the Bean WWOD---What Would Opa Do? Farewell, my freind (sp) Never argue with idiots. They drag you down to their level and beat you with experience Link to comment Share on other sites More sharing options...
StringBean Posted September 18, 2018 Share Posted September 18, 2018 how do you post screen shot like the one you posted? When I go to advanced & try to post a picture, the files are usually too large. Thanks Use the Snipping Tool that comes with Windows. It will create .jpg files small enough to post. peace, the Bean WWOD---What Would Opa Do? Farewell, my freind (sp) Never argue with idiots. They drag you down to their level and beat you with experience Link to comment Share on other sites More sharing options...
Prostock Posted September 18, 2018 Author Share Posted September 18, 2018 Use the Snipping Tool that comes with Windows. It will create .jpg files small enough to post. peace, the Bean Ok, didn't know I had that.......... LOL. Pretty cool. Thanks. Now how do I post the Snipe, the same way through Go Advanced or is there an easier way? I posted this snipe through Go Advanced/Manage Attachments. Link to comment Share on other sites More sharing options...
mrzippy Posted September 18, 2018 Share Posted September 18, 2018 I use Photoshop to resize any shot over 485KB. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Prostock Posted September 19, 2018 Author Share Posted September 19, 2018 http://www.world-of-ai.com/forum/index.php?topic=6419.0 Last question. peace, the Bean Bean.............. That fixed it. I was using the installer from the zip file instead of moving it to it's own folder. Thanks for that... You solved what was a great mystery to me and others who have tried to help. Link to comment Share on other sites More sharing options...
Prostock Posted September 19, 2018 Author Share Posted September 19, 2018 I use Photoshop to resize any shot over 485KB. Thanks Mr Zippy. I'll try using the snipe tool for now. I had no idea I even had it. As for the rest of this post..... Problem has been resolved thanks for String Bean. I was trying to use the Installer from the zip file and didn't know I had to move it to a folder of it's own........ Learning more and more every day thanks to you Super Great Guys in this group. Thanks very much. Link to comment Share on other sites More sharing options...
Prostock Posted September 19, 2018 Author Share Posted September 19, 2018 Great seeing activity at KLAX and other airports. Like a kid with a new toy. LOL. Thanks again Link to comment Share on other sites More sharing options...
CRJ_simpilot Posted September 19, 2018 Share Posted September 19, 2018 Now when ever you add AI, and what ever airport you decide to fly to, you should update that airport from here in the library or buy a payware add-on if you so desire. Providing that airport is payware that is. Reason being is that you want enough parking space for all your AI. And like I already said, keep your AI slider to 45%-50%. Any more and you'll have hell to play with ATC and landing/takeoffs. OOM errors? Read this. What the squawk? An awesome weather website with oodles of Info. and options. Wile E. Coyote would be impressed. Link to comment Share on other sites More sharing options...
Prostock Posted September 19, 2018 Author Share Posted September 19, 2018 (edited) Now when ever you add AI, and what ever airport you decide to fly to, you should update that airport from here in the library or buy a payware add-on if you so desire. Providing that airport is payware that is. Reason being is that you want enough parking space for all your AI. And like I already said, keep your AI slider to 45%-50%. Any more and you'll have hell to play with ATC and landing/takeoffs. Thanks for the info CRJ. So far I've added 20 Airlines to my FSX-SE - Some airports like KBOS & KJFK have added quite a few on the ground Planes, all parked at gates or just parked. I will adjust the sliders as I install more airlines to help with congestion. I did notice the longer I say in place at one airport the more activity. It takes some time to see movement. I was rushing the process a bit. This makes the sim much more enjoyable. Thanks for the help. Thank you & Appreciated. Edited September 19, 2018 by Prostock Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now