fs9.cfg editing probelm

[Tigani]

hello

 

i had this problem that when I switch views the textures gets so blurry and popping

anyway the fix was to edit this line to 400 : TEXTURE_BANDWIDTH_MULT=40

 

so I modified the line but the problem is it still popping !

i had this problem many times and I did the same thing and it was fixed , but now I dont know whats wrong

 

any help ?

[tgibson_new]

Two things to try first.

 

1. Reload the default Cessna at Sea Tac flight and try it again.

 

2. Rename your fs9.cfg file to fs9.cfg.bak and start FS9. It will create a new cfg file. Then try it. Then edit that line to 400 and try it again.

 

Hope this helps,

[Tigani]

Two things to try first.

 

1. Reload the default Cessna at Sea Tac flight and try it again.

 

2. Rename your fs9.cfg file to fs9.cfg.bak and start FS9. It will create a new cfg file. Then try it. Then edit that line to 400 and try it again.

 

Hope this helps,

 

tried the both things , still the same problem

[NMLW]

400 is an awfully high figure, but may work for some folks. Here is what I use"

 

TEXTURE_BANDWIDTH_MULT=120 //120 or less in multiples of 20

TextureMaxLoad=10 //10 or less FS9 default is 3

 

Try to change only one line at a time because it's easier to determine what helps.

[Tigani]

400 is an awfully high figure, but may work for some folks. Here is what I use"

 

TEXTURE_BANDWIDTH_MULT=120 //120 or less in multiples of 20

TextureMaxLoad=10 //10 or less FS9 default is 3

 

Try to change only one line at a time because it's easier to determine what helps.

 

I think last thing to do is Reinstall the sim

thanks all anyway