johnyyz Posted May 7, 2022 Share Posted May 7, 2022 (edited) Do these settings look ok ? Trying to fix the BSOD issues with MSFS. Running on NVME SSD. This is in cruise flight MSFS. Nvdia control set to 40 FPS. RTX3080 switch on card is set to quiet mode. Only thing in community folder is flybywire a320 and the aircraft paint but it crashes with default paint too. Weather is off. , Edited May 7, 2022 by johnyyz Core i7 10700K OC to 4.6 all cores/EVGA 750W G+ PSU/ MSI Z490 edge mobo/GSkill RAM DDR4 32GB(2X16GB) 3600mhz/ ASUS TUF RTX 3080/ Win10 home/ Asus 32 inch monitor 1440p/ CH Flightstick Link to comment Share on other sites More sharing options...
plainsman Posted May 7, 2022 Share Posted May 7, 2022 Just my opinion. .Youi have WAY too many variables active to even remotely trouble shoot your issue. I suspect you may have one of three issues but there is a slight possibility of something obscure. I am suggesting this as a plan, as it goes from the most easy to try to the more complicated. The KEY, DON'T add multiple variables as you proceed through the tests!! First, eliminate NZXT, put EVERYTTHING back to stock (memory without xmp boost), and kill ALL the programs you have running in background. Take everything out of the community folder, liveries included. Now try to run MSTS. If no crash, add things back ONE at a time. If it still crashes, my first guess is a bad GPU capacitor or bad GPU memory. Since you have a computer shop you are working with, see if they will swap out your GPU with another card temporarily, and see if that solves the issue. The Nvidea 3000 series GPUs had a known flaw in the filter capacitor from many asemblers, who didn't follow the spec capacitor from Nvidea. If you still crash. I would look at your PSU. It is Very unlikely, but it could be spiking under heavy load? Remember, the key is to minimize the variables. I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
g7rta Posted May 7, 2022 Share Posted May 7, 2022 Johny did you check out that post I told you about on NZXT? it appears, some say it could be the cause of crashes. Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
johnyyz Posted May 7, 2022 Author Share Posted May 7, 2022 (edited) Yes I had this issue before I installed NZXT I seem to be able to fly for a few hours on autopilot on the fbw a320 but then freeze and bsod I have had my system stress tested all passed perfectly. My cooling is a bequiet fan dark pro 4 but it seems to work fine. Funny though it shuts down like its an overheating thing though. I wonder why my. CPU and. GPU have low utilization percentages, I thought they would be higher Edited May 7, 2022 by johnyyz Core i7 10700K OC to 4.6 all cores/EVGA 750W G+ PSU/ MSI Z490 edge mobo/GSkill RAM DDR4 32GB(2X16GB) 3600mhz/ ASUS TUF RTX 3080/ Win10 home/ Asus 32 inch monitor 1440p/ CH Flightstick Link to comment Share on other sites More sharing options...
g7rta Posted May 7, 2022 Share Posted May 7, 2022 I think it might be worth doing what Bob (Plainsman) has suggested. Having a CTD is one thing, but if you’re getting the BSOD as well, then something’s not right. It usually means hardware, drivers, or incompatible software. What does it say on the BSOD. I don’t suppose it gives an insight to the problem or makes much sense? Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
johnyyz Posted May 7, 2022 Author Share Posted May 7, 2022 (edited) I guess is too much to hope nvidea/Asus would replace the card.????? Ya I'm not just getting crash to desktop but. BSOD as well Edited May 7, 2022 by johnyyz Core i7 10700K OC to 4.6 all cores/EVGA 750W G+ PSU/ MSI Z490 edge mobo/GSkill RAM DDR4 32GB(2X16GB) 3600mhz/ ASUS TUF RTX 3080/ Win10 home/ Asus 32 inch monitor 1440p/ CH Flightstick Link to comment Share on other sites More sharing options...
loki Posted May 7, 2022 Share Posted May 7, 2022 I think it might be worth doing what Bob (Plainsman) has suggested. Having a CTD is one thing, but if you’re getting the BSOD as well, then something’s not right. It usually means hardware, drivers, or incompatible software. What does it say on the BSOD. I don’t suppose it gives an insight to the problem or makes much sense? Regards Steve Along this line, are there any errors given the Windows event log? Link to comment Share on other sites More sharing options...
loki Posted May 7, 2022 Share Posted May 7, 2022 I guess is too much to hope nvidea/Asus would replace the card.????? Ya I'm not just getting crash to desktop but. BSOD as well If you have something to indicate it’s the GPU (BSOD error message or similar), I would contact the GPU company, Asus. Nvidia would only provide end user support for the drivers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now