610799kbs Posted March 25, 2021 Share Posted March 25, 2021 Has anybody else seen this? Doesn't matter what airport or what aircraft selected. When using ASP3D, the wind speed at ground level starts increasing and doesn't stop. If I deactivate ASP3D, the wind speed drops to 0. If I re-activate ASP3D, the wind speed picks up where it left off and continues to increase. By the time I taxi to the active runway the wind speed is over 100 kts. Wind speed at altitude is normal. My sim just started doing this (initially intermittently but now constant) early this year. I am working with Hifi Simulations on this but they say I'm the only ASP3D user who has reported this anomaly. Am not sure that ASP3D is really at fault but it (does) only happen when ASP3D is activated. This is also posted in the AVSIM P3D forum and P3D's forum. Link to comment Share on other sites More sharing options...
mega Posted March 29, 2021 Share Posted March 29, 2021 Check in active sky under options. Go to wind settings and see what your maximum wind speeds at ground level are set to. Lower them if necessary - see if that helps. Regards Trevor Link to comment Share on other sites More sharing options...
mallcott Posted March 30, 2021 Share Posted March 30, 2021 Check in active sky under options. Go to wind settings and see what your maximum wind speeds at ground level are set to. Lower them if necessary - see if that helps. Regards Trevor Never had an issue with ASP3D, so chances are it's your settings. Follow Trevors' guidance... Link to comment Share on other sites More sharing options...
Luke Posted March 30, 2021 Share Posted March 30, 2021 Do the conditions match the METAR? That's step 1. If they don't, then check the ASP3D logs - have you sent them to Hifi? Cheers! Luke Link to comment Share on other sites More sharing options...
610799kbs Posted April 3, 2021 Author Share Posted April 3, 2021 I worked with HiFi Tech and it turns out the problem was caused by the Real Turb add-on. Dunno why, but once I uninstalled that software, ASP3D worked fine. Using Real Turb was probably overkill anyway. Link to comment Share on other sites More sharing options...
Recommended Posts