bruced39 Posted September 19, 2020 Share Posted September 19, 2020 SO I have a high end computer and have set my settings to ULTRA. Yet when I go fly all my trees are very blocky and bulky and not looking realistic as I have seen in some pictures. My FPS is just fine why are my trees so bulky and blocky. Anything I can do to render them better. Again all is on Ultra settings I have a 2080ti and I9-9900k at 5gx and fps is all good just visuals suck still at ultra. Buildings are not realistic and textures are blurry in spots. Any help to fi this would be great. I'm new to MS2020 and the MS flight sim in general. ASUS ROG Maximus XI HERO Z-390 MB I9-9900k CPU @5.0 GHZ Geforce RTX 2080TI 32GB DDR4 2400 RAM Link to comment Share on other sites More sharing options...
plainsman Posted September 19, 2020 Share Posted September 19, 2020 What is your internet connection speed? Most of the scenery is stored on the net. If you have a slow internet connection, all your hardware won't help. You might also post a screenshot of your settings page. There are lots of things to manage other than "ultra". You also don't mention your monitor? What resolution are you running? I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
g7rta Posted September 19, 2020 Share Posted September 19, 2020 and what is Render Scale set to? Have you got photo geometry on etc? Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Kapitan Posted September 19, 2020 Share Posted September 19, 2020 SO I have a high end computer and have set my settings to ULTRA. Yet when I go fly all my trees are very blocky and bulky and not looking realistic as I have seen in some pictures. My FPS is just fine why are my trees so bulky and blocky. Anything I can do to render them better. Again all is on Ultra settings I have a 2080ti and I9-9900k at 5gx and fps is all good just visuals suck still at ultra. Buildings are not realistic and textures are blurry in spots. Any help to fi this would be great. I'm new to MS2020 and the MS flight sim in general. For Trees theres is a fix https://github.com/cnorton-webdev/FS2020_Tree_Editor/releases/tag/v1.2.0 Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
bruced39 Posted September 19, 2020 Author Share Posted September 19, 2020 Render Scale was at 130% TAA on and yes Photogeometry is on. Thanks for checking Steve. ASUS ROG Maximus XI HERO Z-390 MB I9-9900k CPU @5.0 GHZ Geforce RTX 2080TI 32GB DDR4 2400 RAM Link to comment Share on other sites More sharing options...
bruced39 Posted September 19, 2020 Author Share Posted September 19, 2020 I will check out the fix Kapitan. Thank you. ASUS ROG Maximus XI HERO Z-390 MB I9-9900k CPU @5.0 GHZ Geforce RTX 2080TI 32GB DDR4 2400 RAM Link to comment Share on other sites More sharing options...
doering1 Posted September 19, 2020 Share Posted September 19, 2020 Can you post a screenshot of what you are seeing? My latest video at The Flight Level - TOP GUN | MSFS | F-14 Tomcat (Heatblur & IndiaFoxtEcho) + NAS Miramar 1986 (Sundownersim) Link to comment Share on other sites More sharing options...
Kapitan Posted September 19, 2020 Share Posted September 19, 2020 Check the General Graphics and Data Settings again, its very easy to “think†everything is ON when they are not: Bing Maps for example. Several times without motive the game would turn off Bing maps, and you only realize its off cause the graphics dont look good Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
SpookyDiver Posted September 19, 2020 Share Posted September 19, 2020 The Devs put more emphasis to locations that are most likely to be visited, like the Coliseum in Rome, the Christ in Brasil, Sydney Theater and such, and left out many others out. For example, if I fly over the city of Beaumont Texas and look at the courthouse, it shows a square building, single floor, when in reality, it is an old 12+ floors tall!!! My old house in the country which had three dormers on the roof and a detached garage all surrounded by a fence, you can only see a fence around a house with no dormers or garage. I checked the locations with MS own Maps, which is what they used to compiled the terrain, and it shows all the details. The AI they used had to map the whole world and bring it up to 3D, and with a product to lunch, I understand the Devs had to make some decisions, but I hope that in the future they will pick up where they left off and improve the scenery. Maybe that's why they didn't give us helicopters yet, cause the closer to the ground the worst it looks. Link to comment Share on other sites More sharing options...
Kapitan Posted September 19, 2020 Share Posted September 19, 2020 yes, agree the autogen is sometimes a shoot in the dark in some places, too random The world is too big, so there are only too possibilities, hand made addons for each city and improved autogen that "read" the maps as real as possible Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
shb7 Posted September 20, 2020 Share Posted September 20, 2020 What is your internet connection speed? Most of the scenery is stored on the net. If you have a slow internet connection, all your hardware won't help. You might also post a screenshot of your settings page. There are lots of things to manage other than "ultra". You also don't mention your monitor? What resolution are you running? If your internet speed is too slow, wouldn't the program tell you? I'm assuming it would. Link to comment Share on other sites More sharing options...
shb7 Posted September 20, 2020 Share Posted September 20, 2020 I have a brand new fairly good computer, and I'm disappointed with the graphics. All the YouTube videos looked so good but what I'm seeing is definitely computer generated. Link to comment Share on other sites More sharing options...
FLyFarther Posted September 20, 2020 Share Posted September 20, 2020 Try setting FPS to 60 . Not sure why but my system goes bad if i put higher than 60 fps . Its an older system tho also Sent from my SM-A205W using Tapatalk Link to comment Share on other sites More sharing options...
paulf99 Posted September 20, 2020 Share Posted September 20, 2020 SO I have a high end computer and have set my settings to ULTRA. Yet when I go fly all my trees are very blocky and bulky and not looking realistic as I have seen in some pictures. My FPS is just fine why are my trees so bulky and blocky. Anything I can do to render them better. Again all is on Ultra settings I have a 2080ti and I9-9900k at 5gx and fps is all good just visuals suck still at ultra. Buildings are not realistic and textures are blurry in spots. Any help to fi this would be great. I'm new to MS2020 and the MS flight sim in general.After last update my graphics lost realism, and then I noticed marketplace was grayed out, and if I clicked on my Xbox name in top right, the server showed 'automatic' but didn't actually connect to a server. So basically, I was getting no Bing map data as not connected to content server. I had to fire up 'Xbox game bar' app, sign out, then sign back in again. Then restart MSFS and all was good again. Sent from my VOG-L09 using Tapatalk Link to comment Share on other sites More sharing options...
FLyFarther Posted September 20, 2020 Share Posted September 20, 2020 Also , wth happen to the water? I had waves and white caps before this update. Now all I see is explane 11 water. Sent from my SM-A205W using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now