Gadgetman Posted September 17, 2020 Share Posted September 17, 2020 I have a CH Eclipse yoke. No matter how many times I calibrate it, the aircraft slowly rolls to the port side. Not talking about the left turning tendency. This occurs in stable flight in smooth air. I'm flying the 172SP, running Xplane 11, with Saitek rudder pedals, Windows 10 64 bit. Everything else works great. Does anyone have any suggestions? Maybe some noise on the USB power side that a capacitor might fix? Link to comment Share on other sites More sharing options...
johnost Posted September 17, 2020 Share Posted September 17, 2020 I presume the rudder pedals are also calibrated, have you tried rudder and aileron trim? Link to comment Share on other sites More sharing options...
flytv1 Posted September 17, 2020 Share Posted September 17, 2020 Does anyone have any suggestions? Hi. Look at this posthttps://www.flightsim.com/vbfs/showthread.php?325351-Is-It-CH-Rudder-Peddles-Or-Me/page2 and see if these settings help RIGHT TURN TEND CORRECT P acf/_ailn_tab 0.004550000 //for rc1 .0040 for RC2 .00355 P acf/_rudd_tab 0.004000000 // .002 was 005 This is for Right Turn tendency fix you may want to try a small change in values and test it at full RPM at 1000 ft MSL over ocean if possible, and make sure you wait for it to stabilize, should be around 2730, 130 Kts for the C172SP G1K. Larger numbers will try to adjust to fly more to the left. It's a know problem in the XPlane in the light GAs You can also use Planemaker to make this change, or just use a text editor and change the values in the .acf file. Link to comment Share on other sites More sharing options...
Recommended Posts