kwi

Hi Luke, Found GPU load always steady acc GPU-Z Peter

Work done last night: Remove NVI from system and reboot: no change/no help Setting up Nvidia contr panel FSX with a older settings: no change/no help Deinstalled Nvidia driver 441.41 from system, reboot, install 398.38, no change/no help Installed NVI again, no change/no help I thinking more and more the problem is not FSX related, it is something wrong with my PC. What made me thinking of that: last Sunday we had a long elec power cut. So I checked the BIOS and found that all SSD`s running in EIDE mode not in AHCI. But I`m unable to restore the BIOS to AHCI. The AHCI Driver is loaded, but when I change to AHCI the PC will not reboot anymore. Maybe it could something give that problem, but why only in full screen. I think I give up and accept window mode for flying. (That is a FSX pc only, nothing else) Thanks to all for your help Peter

@Mallcott I know that the advice about 2 years old. But that was the only one which give me the clarity to read the PFD, ND and EWD/EICAS screens inside VC (AS 320 / CS777) Used driver is 441.41 @Tim I removed NI from System. No change at all. Super smooth and clear in window mode, Jumping in full screen mode as described above. @Both Later today I will remove the Nvidia driver and install a older one. Maybe my machine cannot handle those brandnew drivers. Report comes tomorrow. Thank you both Peter

Hi Tim, I have to check out. Good Idea, by the way. Will come back to you, but need a while I´m not home at the moment Peter

Thanks Tim for your answer. I am not a expert at all, but I do not think that AA and AF have anything to do with my stutters. Don´t get me wrong: that problem is the stuttering in full screen and without stuttering in window mode, without changing anything. Peter

Hi all, I made a fresh setup of FSX Sp1/2 under Win10/64 fully updated. For NVI settings I used the guide from NickN (https://www.simforums.com/forums/nvi-w7810-driver-setup-fsx-fsxse-and-p3d-update_topic59954.html ) which gave me always good results. But at this time I got some abnormalities: in full screen mode, which I use, I have clear panel, PFD and ND are very clear and frames locked at 30 are constant. But, during taxi and after t/o I have heavy stutters. The ground equipment from GSX looks like to jump 2meter forward, 1 meter backwards and so on the whole way. Now comes the mistery: if I switch to window mode, same frames, same clarity, but everything smooth as silk!!!! Can someone of the experts here tell my on which screw I have to turn to get the same also in full screen mode?? Tks in advance Peter

@Mallcot I7 2600 @3900, 6GB Ram, GTX960 4MB, C:Win10Home 280GB SSD, D:FSX 500GB SSD Peter

@tiger 1962 I do have a ASUS 27* 1920x1080. @Mallcot I get back to you later today @ftldave That is the paper which I follows Tks all for your tips Peter

Hi, after very long try and error I have found a setting which is ok for me. Smooth running and good frames. What not satisfied me is the legibility of the PFD-ND-EICAS or Ecam. With iFly 737 for example, I can undock those and then it is ok. But for the AS Airbus that is not possible to undock My question now is: which setting is "responsible" for a better legibility?? I´m scaring to trying anything, maybe then I loosing my settings again. Tks for your answer Peter

A couple of weeks ago I switched from HDD to SSD. Made a fresh install Win10 on Samsung 250 SSD C:\ drive, and also fresh FSX onto Samsung 500Gb D:\ Since then it takes a looong time to start FSX, and even much more longer if I change to another plane. It feels like double then on the old HDD. FSX performance itself is equal or even better during flight. No other change in HW or SW. Trim is on for both SSD's Thank you for any tips Peter Win10Home, I7@3,8 8Gig RAM GTX960/4Gb