Garciamk3g

No Trace, 25min after initial start nothing. M.2 NvMe Drive The 970 is actually the card that I was using on my previous build, on an i7 2600 and believe it or not the performance wasn't that bad on Mid settings but it wasn't great either I was averaging between 25 30fps with a couple of tweaks in the menu with the 970. Keep in mind that my second generation i7 on the old build was bottlenecking the GTX 970 the CPU was just too weak for the 970 so the card wasn't performing at 100% I expect performance to be slightly better now with the new CPU i7 10700K and the slightly faster RAM 32GB 3600 DDR4 RAM. I am in the market for a new card which I wanted to include on my new build but considering that no one has any of the RTX cards available in stock and I am not willing to pay scalpers price I'm stuck with the GTX 970 temporarily LOL

No Trace, 25min after initial start nothing. M.2 NvMe Drive The 970 is actually the car that was using on my previous build, on an i7 2600 and believe it or not the performance wasn't that bad on Mid settings but it wasn't great either I was averaging between 25 30fps with a couple of tweaks in the menu with the 970. Keep in mind that my second generation i7 on the old build was bottlenecking the GTX 970 the CPU was just too weak for the 970 so the card wasn't performing at 100% I expect performance to be slightly better now with the new CPU i7 10700K and the slightly faster RAM 32GB 3600 DDR4 RAM. I am in the market for a new card which I wanted to include on my new build but considering that no one has any of the RTX cards available in stock and I am not willing to pay scalpers price I'm stuck with the GTX 970 temporarily LOL

Unfortunatly Nothing at all

So, I finally finished building a new PC Specifically for FS2020, Installed latest version of Windows 10 Pro ran all the required Updates, after trying many fixes suggested in various Forums this game just wont Launch :-( Press Play within the Xbox Game pass Menu, Nothing happens. Launched through Microsoft Store, Nothing Happens Launched via Administrator after numerous uninstall/Reinstall nothing happens Tried Repairing, Resetting, Numerous times the game just wont launch, nothing not even a splash screen. :(

Thanks for taking the time to help me out, guess I'll end up waiting a bit longer see if I can save up enough to get a better build.

I'm KINDA of on a tight budget so I was planning to take advantage of the Lease to own Program that Best Buy has to offer and thought perhaps the hardware on the PC above would do well with FS2020, at least on High settings. I'm currently runing MSFS 2020 on my current PC, (Spec's below) on medium settings and although its a bit stuttery, suprisingly it's not too bad on low density areas and Still Flyable on high density areas. So I thought perhaps the computer above (having much better Hardware) would run it really well on high settings.

Currently Running 3 VA24EHEY 24" 1920x1080 Monitors and only one will be running FS2020 as I Normally don't Fly on all 3 monitors. ASUS VA24EHE Eye Care Monitor – 23.8 inch, Full HD, IPS, Frameless, 75Hz, Adaptive- 23.8-inch Full HD (1920x1080) LED backlight display with IPS 178° wide viewing angle panel Up to 75Hz refresh rate with Adaptive-Sync/FreeSync™ technology to eliminate tracing and ensure crisp and clear video playback

Looking into buying a new computer for Flight Simulator 2020 Stumbled on this particular computer for about 1,500. I would like to know people's opinion on what type of performance can I expect before purchasing this computer and for the hardware included is it worth the price.

Thanks, yes it is quite tedious to get these older products to work properly in FS2020 (atleast for me) LOL it's also a pain in the neck, but I did managed to get the Yoke to work. I'm now trying to get the rudder pedals to work properly, no luck as of yet. The Brake Axis for Left and Right works perfectly fine, it seems like the issue is just the Rudder Axis itself, it doesn't seem to be detecting the rudder pedals properly for some odd reason, as I don't see the white bar that detects movement of the axis when pushing on the rudder pedals, but I will mess with it a little bit more tomorrow. It seems to be the same issue I was having with the Yoke's Elevator Axis when the white bar wasn't showing up, but after messing with it a bit further the bar showed up and now the yoke seems to be working fine. BTW I calibrate both devices through the CH Control Manager Panel and everything seems to be calibrated just fine.

Ended up deleting the profile, going through the steps over again, and reajusting the sensitivities, now finally the Yoke seems to work but unfortunately the Rudder Pedals are still acting up. I'll see if I can mess with it a bit more tomorrow and see if I can get the rudder pedals to work properly. BTW I have the USB versions of the Yoke and Rudder pedals, I did notice something on the assignment for the Elevator Axis, on the first try after setting it up it was not displaying the bar that moves left to right when movement is detected like the one on the Aileron Axis, for some reason after setting it up a second time, the White Bar appeared and now it works. I'm having the same issue with the Rudder Axis, as of right now it is not displaying the white bar that moves left to right when movement is detected, I have no idea as to why it is doing that but I will tinker with it tomorrow and see if I can get it to work, perhaps that's why the rudder's are not working properly.

I've realized someone posted a similar post recently but unfortunately the solution provided just dint work. I to am having issues setting up the CH Yoke and Pedals In FS2020, I set this following multiple videos on YouTube including the one on the previous post. Before the sensitivity patch everything was working great, but now It just doesn't work for me? Ailerons AXIS {Set as instructed on the video} Elevator AXIS {Set as instructed on the video} Ruder AXIS {Set as instructed on the video} Left Brake AXIS {Set as instructed on the video} Right Brake AXIS {Set as instructed on the video} I've also tried different Sensitivity Settings Simply fails to work properly. Elevator AXIS- When I Pull up on the yoke instead of the nose pitching UP it Pitches Down When I Push down on the yoke Pretty much the same it Pitches Down (Seems to only pitch downwards regardless the yoke is being pulled or pushed) Ailerons AXIS- Horrible just Horrible Although the yoke seems to be operating when banking Left to Right, the Aircraft does not center, then when i center the Aircraft it seems to veer of to the left on its own. Also tried different settings under Sensitivity (Neutral) to see if it corrects the issue but Unfortunately nothing works. Ruder AXIS- When trying to Rudder to the right, The plane goes LEFT, Seems like Left is the only direction the Aircraft goes regardless which way you Rudder? I've messed with all sensitivity Settings and honestly I simply cant get this to work, Current settings which I've picked up at a forum as being a working solution but still acts up as described above. [ATTACH=CONFIG]225618[/ATTACH] I hope there's a fix somewhere this is driving me NUTS :confused:

Thanks :pilot:

Thanks Everyone glad you enjoyed the Screens :pilot::pilot:

:pilot::pilot: It's a good thing I still have all them old scenery Gems from way back, best of the best for FS9. Geo, and Fsaddon was truly the best of the best, It was the closest you can get to ORBX Scenery back then for FS2004 :pilot: Definitely the best investment I've ever made, even now 2021 and still looks and feel Amazing.

Just got Back from an Air Hauler Delivery :pilot: Scenery (Orcas Island FS2004)

Sane here Sascha Thank you...your #1 (Numero Uno) :pilot:

Sorry about earlier post was having some trouble with the links, Here's the Avsim Link with More Info https://www.avsim.com/forums/topic/451318-how-to-get-evo-2016-and-release-information/ He's Google Plus Account https://plus.google.com/117587056222120146687

Thank You Sascha :cool:

Anytime Sascha...Did I Mention before, I'm In love with your CLOUDS best I've seen.

Negative, Default as in the the ones I Had last in the Sim Not related to Evo. [037B2WA1.bmp] is not in the [Evo 2018 Package] from what I'm seeing. But it is in my Scenery world Texture. I believe it just overwrites the necessary files that are intended as part of the Evo Package The rest are Default.

Going by what JSMR Mentioned above, I Didn't actually convert but I had replaced just the following files from Evo package listed below with the default ones I've backed up and I'm no longer getting the CTD. There are a total of 134 Summer files listed. I have listed the files Below, I used Anti Twin to compare the files with just the large ones, out of 180 large files with the same names Anti Twin only found 134. I then replaced just the 134 files listed below with the default ones and everything seems to be working. genirator.bat 001b2su1.bmp 001b2SU2.bmp 001b2SU3.bmp 001b2SU4.bmp 001b2SU5.bmp 002b2Su1.bmp 002b2Su2.bmp 002b2Su3.bmp 002b2Su4.bmp 002b2Su5.bmp 002b2Su6.bmp 002b2Su7.bmp 003b2su1.bmp 003b2su2.bmp 003b2su3.bmp 003b2su4.bmp 003b2su5.bmp 003b2su6.bmp 003b2su7.bmp 006a2su1.bmp 006A2su2.bmp 006a2su3.bmp 006A2Su4.bmp 006a2su5.bmp 006a2su6.bmp 006a2su7.bmp 006b2su1.bmp 006b2su2.bmp 006b2Su3.bmp 006b2su4.bmp 006b2su5.bmp 006b2su6.bmp 006b2su7.bmp 009b2su1.bmp 009b2su2.bmp 009b2su3.bmp 009b2su4.bmp 009b2su5.bmp 009b2su6.bmp 009b2su7.bmp 010b2SU1.bmp 010b2SU2.bmp 010b2SU3.bmp 010b2SU4.bmp 010b2SU5.bmp 010b2SU6.bmp 010b2SU7.bmp 011b2su1.bmp 011b2su2.bmp 011b2su3.bmp 011b2su4.bmp 011b2su5.bmp 011b2su6.bmp 011b2su7.bmp 012b2wa1.bmp 013b2su1.bmp 013b2su2.bmp 013b2su3.bmp 013b2su4.bmp 013b2su5.bmp 013b2su6.bmp 013b2su7.bmp 016b2su1.bmp 016b2su2.bmp 016b2su3.bmp 016b2su4.bmp 016b2su5.bmp 050b2Su1.bmp 050b2Su2.bmp 050b2Su3.bmp 050b2Su4.bmp 050b2Su5.bmp 050b2Su6.bmp 050b2Su7.bmp 051b2su1.bmp 051b2su2.bmp 051b2su3.bmp 051b2su4.bmp 051b2su5.bmp 051b2su6.bmp 051b2su7.bmp 052b2Su1.bmp 052b2Su2.bmp 052b2Su3.bmp 052b2Su4.bmp 052b2Su5.bmp 052b2Su6.bmp 052b2Su7.bmp 055b2Su1.bmp 055b2Su2.bmp 055b2Su3.bmp 055b2Su4.bmp 055b2Su5.bmp 056a2SU1.bmp 056a2SU2.bmp 056a2SU3.bmp 056a2SU4.bmp 056a2SU5.bmp 056a2SU6.bmp 056a2SU7.bmp 056b2su1.bmp 056b2su2.bmp 056b2su3.bmp 056b2su4.bmp 056b2su5.bmp 056b2su6.bmp 056b2su7.bmp 056C2SU1.bmp 056C2SU2.bmp 056C2SU3.bmp 056C2SU4.bmp 056C2SU5.bmp 056C2SU6.bmp 056C2Su7.bmp 058b2su1.bmp 058b2su2.bmp 058b2su3.bmp 058b2su4.bmp 058b2su5.bmp 058b2su6.bmp 058b2su7.bmp 067b2su1.bmp 067b2su2.bmp 067b2su3.bmp 067b2su4.bmp 067b2su5.bmp 067b2su6.bmp 067b2su7.bmp 123b2su1.bmp 124b2su1.bmp 125b2su1.bmp 126b2su1.bmp Comparing the sizes with the ones I have backed up from the FS9 Installed on the Laptop you can see on the far right the size differences.

Thanks for that find JSMR I will do the same on my end and see if it fixes the problem here. :cool:

Ok, I've just downloaded that Texture file and replaced it, unfortunately the crash still occurs, it seems to be crashing at exactly 54%, I've also tried it with the default texture for that specific file to no Avail. I Will continue to observe here as well once I Get back to see what I Can find. I have forgotten to mention this is crashing @ Buttonville CYKZ

Hello Sascha, I did some monitoring of the last file being read by FS9 Just before the crash and found the crash occurs while the summer texture 127b2su.bmp is being read ..details below. Last read file was 127b2su1.bmp PS: Perhaps the culprit lies within the summer textures, hope this helps.

Tested the Ground Textures on the Lappy...... this is where I Do all the testing before moving anything on the main Sim. I Noticed the CTD In Flight Ontario's Scenery CYKZ Buttonville..If I Remember correctly it does it on Summer in Daylight. Reverting back to the default Textures Everything went back to normal no CTD.