aler

Having said it all worked fine, now not so. Loading up, settings all set, CDU programmed. Take off, set AP. Aircraft climbs but in a series of porpoising leaps. Disconnect AP and hand fly briefly, reset AP. Climb continues as before but once past the first WP it just keeps going, not following the route. Then starts an anti-clockwise turn, slowly but unstoppably going in circles. Time to bale out, getting dizzy.

 

I shall go back to the non-Heavy version and see what happens.

I do not any problems especially the ones you describe. I would suggest to address your problems to their Discord site at: https://discord.gg/CfHuVbWfpQ

This freeware mod

https://flightsim.to/file/23875/captain-sim-b777-salty-compatibility-mod-with-eicas-mod

Makes CS a joy to fly. My .02 cents

Despite the negative comments, it works for me very good after installing

Captain Sim B777 B767 - Salty Compatibility with EICAS Mod

It can be downloaded for free from Flightsim.to

My .02 cents

Here is the download link - dev version SU6 compatible. It works

https://codeload.github.com/Heavy-Division/B78XH/zip/refs/heads/main

Happy Flying

Empty Community folder

Thank you guys, problem solved (missing panel directory ????) from the 787-10

Do you have any addon in the community folder for this plane? If so try removing it from the folder.

Empty Community folder

Everything was working fine after the SU5, and all of a sudden I got this. Any suggestions?

…"…The best practice is to remove them all before an update, and afterward check each add-on developer's website/discord/fb/twitter for news of any patch or update release due…….

————————————————————————————

For an automatic dev updates I use

https://flightsim.to/file/15569/msfs-community-downloader

Yeah.....

I am just irritated that someone with an I7-7700K complains about running 4K at everything maximum settings, when the issue is known to be a data speed problem. Thus, yes you did create the problem. Turn down the problem data stream demand, and it goes away, or get an I9-10900K and max out all you want.

Sorry to disappoint you but my I7 and GTX1080TI are doing very well, no need to buy anything. NO changes to any of my 4K graphics specs just TURN OFF Photogrammetry for KORD only. This is my last response to you.

Happy Landings

This program streams hugely greater amounts of data than X-Plane. It isn't that I fault your running 4K, but maybe reasonable settings and turning off "Phorgrammetry" would work more consistently than gritching in the forums about a problem you create!

There are a lot of people complaining about the same problem. I did not create the problem but finally I found a solution that was suggested as the initial intend was.

What a crumpy response for “thanking you for your time”. Happy landings

You are trying to run 4K with an I7 7700K and a GTX 1080ti all on MAX settings. Even the I9 9900K and a RTX 2080ti struggle to drive a 4K monitor on ultra.

Yes, I run the GTX 1080TI with two 4K-42" TV monitors, along with a curved one and with an external CDU, with no problems in X-Plane. The only solution for FS2020 is to turn OFF the Phorgrammetry and I do not care as far as KORD. I haven't seen any other airports in US or abroad producing speed bumps upon my landing so far. So I rest my case with everything on ULTRA and Photogrammetry OFF for KORD. Thanks for your time.

https://forums.flightsimulator.com/t/runway-tears-awareness/314575

Those specs don't look like the cause?? What is your ram memory speed?

Wait, is MSFS running off the HD? That could be the problem!

MSFS is running from the SSD and on a 42" 4k TV full screen see the graphics specs. I will check the memory speed.

If you read the thread, you will understand they are not the fault of MSFS, but rather that your internet connection, ram or processor is too slow to properly use the data stream.

What is your internet speed and what is your processor and your ram speed?

I have 1GB fiberoptic internet speed. I am still investigating the problem. My rig's specs are

ASUS, Intel® Core™ i7-7700K, CPU 4.8GHz, GTX 1080Ti 11GB, 32GB RAM, 512GB SSD + 2TB HDD.

I am an X Plane cockpit builder and I never had problems like these before :mad::mad:

I just posted a trip of KMCI to KPIR in the screenshot section. I flew this flight 11/9/2020. It worked fine for me???

Thank you. I think I found a solution. I will post my findings tomorrow. Smooth battery landings at KORD.

Strange, I have Photogrammetry on and I have not had the issue??

Is your installation stock? Have you added any files?

I always fly with the UA Dreamliner livery. There are three files in my community folder, the UA livery, and to small files (code) they take care of the horizontal line and truncate the series of numbers after the decimal point when view the LEGS. The speed bumps appear with both stock Boeing landings too.

What are your computer specs and what controllers are you using?

I am not seeing this issue? Could it be a hardware problem or mismatch??

With Photogrammetry OFF no speed bumps and very smooth landings. My rig's specs:

ASUS, Intel® Core™ i7-7700K, CPU 4.8GHz, GTX 1080Ti 11GB, 32GB RAM, 512GB SSD + 2TB HDD.

I see the same issue with KMCI and KDFW. I have not tried KORD. I have gone back to FS9 for the second time now. MSFS keeps getting worse with every so called patch.

I tried to capture some pics but the bumps are at the beginning very pronounced and as the plane advances on the runway they progressively become smaller and disappear. The picture is not a good one but provides a rough idea. I found online that if Photogrammetry is OFF then there is no problem. I haven't tried yet but i will.

Can you post a picture?

Yes, I will tomorrow, I am off line now.