JohnFoz

All sorted now folks. It was a case of me not setting up my Cirrus cockpit camera views currently in the numeric keypad. I realised that some of them already had some control surface actions already present which must have conflicted with my new camera view bindings, so all I did was delete all these to leave just the camera view for that particular key. I thought I'd taken all this into account when setting up the views, but apparently not. Funny thing is some other aircraft bindings (e.g. TBM) still have some of the same original set up, yet it is not adversly affected as the Cirrus was.

FX Cirrus Vision Jet G2 query with route set. Why does my Cirrus fly away on a route (with SID) perfectly ok, with all the autopilot set up correctly (I think) then decides to go into a steep bank and goes out of control. I have emptied the community folder except for the Working Title G3000 upgrade (latest version) I have on occasion experienced this behaviour before on another aircraft, so maybe not the Cirrus. Any ideas anyone?

I am after some "proper" airline liveries for my FBW Airbus. I see there there are quite a few options in the Market Place but I am unclear whether they just apply to the default Airbus? Recomendations/advice appreciated, especially for UK airline liveries.

Trying to download “Flighting Update” 1.23.12.0 without success since yesterday. It seems to have downloaded a large chunk but is now stuck at 1.58gb still to download. In the Microsoft Store it says it is “up to date” when it clearly isn’t. The problem seems to be a very slow download speed. What’s going on folks?

FlyByWire problem. Can anyone explain why my default Asobo Airbus A320( V0.1.99) has perfectly readable radio frequency and squark displays whereas my FlyByWire Airbus (V0.7.1) they are all but invisible? There seems no way of increasing the brigtness as non of the many brightness adjustment knobs address the radio or squark displays, so I'm assuming it's a FBW bug?

THanks for all will try. What I can't figure out is why there is no pointer icon available to select the 2 options. I know it exists because a YT video by a real life Airbus pilot demonstrates this at length. All I ever see is a hand to turn the knob. There again I may just be doing it all wrong!

No luck I'm afraid. I see no way that managed and selected modes can be selected at present. But it's not the just the FBW version but the default Airbus too. I can only assume that the SU5 updated has messed the A/P controls

Will try thanks

Several A/P controls allow for swapping between managed and selected modes. This can be done by moving the appropriate switches up or down according to some (oldish) videos. In reality I can’t get this to work despite using both Legacy and Modern modes. I am using the latest FBW update. Another example is the Baro Reference control which says “Pull for Standard” Neither do the latest on screen tool tips give the controls needed to achieve correct operation. I am getting the same result using the default Airbus Advice please.

I have now tried most of the Zendesk advice without any luck. Still having to download very small chunks before the dreaded loop appears. Not tried Netlimiter as I do not wish to pay for software which will only be used once. The free alternatives are far too technical at first glance. Why would I need to do this anyway when it was never an issue before? Despite posting on four Facebook MSFS forums in addition to this one, nobody seems to have a reliable solution. Even if I reinstall the sim (I have the dvd version) I am still faced with huge updates when presumably the looping issue will occur again? THe only solution seems to be sticking with 2 or 3 updates at a time then rebooting/restarting the sim. This will take forever though. Also why is this occuring just with this update 5 ? Some of the previous updates where pretty big and I never had any "looping" issues. Still looking for a effective answer to my problem

What is the DISM.exe?

ethernet: 220 mb download speed so should be fine

Tried: 1) Turn off Defender scanning 2) Network reset 3) Disable IPV6 4) Disable Window auto tuning (whatever that does!) 5) Checked for bad RAM - ok It gets to a certain file and then keeps downloading this file continously and the gb downloaded keeps showing that the same operation is repeated continually. This happens with a minute so when nothing gets downloadedand freezes at say only 100mb download but occasionally might go for several minutes and successfully download say 1 gb. At this rate it will take days and hundreds of attempts to complete the job. Help!

Tried the "Download seems stuck on Big Files" option A "Disable window auto tuning" Sadly it hasn't worked. A bit nervous at trying some of the other suggestions, so running out of patience.

Downloading seems to be working with regard to download speed etc. Trouble is it only works for a few minutes before it seems to go into a loop, despite the download apparently continuing. Last attempt showed 7/251 and 1.13gb at which it stuck Deleted the Community folder. Is it still a case of server overload, and if so why does it still seem to be downloading?

I need a new rudder/throttle/joystick to replace my temperamental and old Black Widow joystick. The Thrustmaster T-Flight HOTAS seems the obvious equivalent to the Black Widow,but unfortunately is in short supply. Are there any other options similar to the Black Widow? Without spending too much money, what is the best option for MSFS 2020?

Why should a 3rd party mod rectify the original default plane? Doesn't make sense to me sorry! 2 deliveries have been deleted but can't delete the default like others have said.

Deleting the Working Title and Kenmore versions has had no effect. The default TBM is still affected.

Thanks for the tips. Both the Working Tital and the Kenmore versions were "up to date" according to the Contents Manager. Is this the same process as your suggestion? Perhaps I could just remove these two versions and start again (or ignore them)?

I have 3 versions of the TBM, default, Kenmore and Aviators Club. All 3 are suffering major cockpit issues after the latest update. Altimeter and speed not working. On start up oil pressure and fuel pressure are showing red. The PFD/MFD is locked on the map screen and fails to respond to any inputs at all on either. TAWS TEST has appeared on screen, which has never happened before. The plane actually still flies ok, but the cockpit seems to have gone crazy. This only seems to affect the TBM fortunately. Should I delete the Kenmore and Aviators Club versions from the Contents Manager and perhaps reinstall? Also, can you easily delete the default TBM and reinstall, and if so how? Any solutions anyone?

I am trying to run MSFS without having the “Insert Disc !” message every time. I have had some success using Daemon Tools Lite to create a copy of disc 1. I have saved the copy in both MDX and ISO formats. Using both of these formats has been successful, but only for a short period of time, after which it is back to using the disc 1 again. Any solutions anyone?

What I have learnt is that it is vital to read ALL the developers info before installing to understand "current issues" To be fair the info was there, I just didn't read it. But yes, perhaps it is too much to expect add ons to have no negative issues.

Problem solved! I had the Working Title CJ4 v0.8.3 mod installed (the current one) andd that was the problem, as it seems to not load up the plan. Deleting it restored the flight plan loading ok. You need to delve into thedepths of the FMC :- RECALL (game/SB option in IDX > page2 ROUTE MENU. This info was in the Mod changes file

Just what I do. So still no explanation!

I'm using the CJ4 Do you have to load it up in the Longitude, or does it show up automatically? If it does then I must be missing something?