NEBOJSA

It was not bad at all ,no soldering required.

UPDATE. Changed the potentiometer ,ailerons work fine now.

Interesting. Will have to look into it. I have been using the same yoke starting with FS98,2000,2004 WIN98,XP,7,10 It ran fine in Win10 and then the problem slowly started to appear to the current problem. I will replace the potentiometer, since it is only a few dollars and go from there.

I took apart the yoke everything inside looks connected ok to me. Potentiometer problem was something a was thinking. I can move the ailerons from the current position to even worse position only. The yoke is over 20yrs old so it might be a a potentiometer issue. I will look into that before i get a another yoke.

I am having issues calibrating the CH YOKE. After years of not having a problem except where a pitch potentiometer needed to be replaced i am having issues with the ailerons. Elevator and Throttles work fine. One side is slightly up and the other side is slightly down and you wind up going in circles. If i reset the yoke to default then the ailerons dont work. Usually a fly Level-D767 and thought that it is a Level-D issue but not. All the aircraft have this problem. I have uninstalled CH YOKE , uninstalled FS9 and then reinstalled ONLY FS9 with NO YOKE. I tried the default Boeing 737 and 747 bye starting at the runway set up for t/o using the keyboard only. I was able to go straight down the rwy no problem. But after installing the yoke, the problem came back. I tried to cabriite with minimum improvement. When i go to calibrate the yoke the first part where you have to go in a circle with the yoke, that little + is constantly moving around with out me touching the yoke. Makes me wonder is it the yoke itself. Is there a driver that i need to update. I am using Win10

Thank you

Should the 9.1 update be installed in the FS9 folder or can it be install elsewhere.

Got it working

How do you install the MSXML4 file in windows 10. What worked for me in Windows7 does not work for Windows 10 No SID/STAR showing in FMC Level-D

Will be taking a plunge in having Windows 7 uninstalled and update to Windows 10 today.I am keeping my fingers crossed.

What about payware aircraft? Will Level-D, PMDG or other payware aircraft work in 64bit. nebojsa

What about this one. https://flyawaysimulation.com/downloads/files/1271/fs98-fs2k4-fs-real-time-v177/

Great shots nebojsa

I had the same problem of no SID/STAR in the Window7. It installed properly,but not showing in the FMS . MSXML 4.0 did the trick but don't know if it would solve the problem in Windows 10

People that are using Level-D 767 for FS9 , which version of Windows 10..... 32-bit or 64-bit version Thanks

A update regarding my original post. The problem was that my potentiometer. Installed a new one and everything is working now.

I have mine installed in C/Program files. I have not had any issues.

OK i see now what you mean bye vertical rocker. The left vertical rocker is set for elevator trim and it is used to set the proper trim for take-off bye looking at the pedestal. The problem is, that alone wont let me take-off unless the mechanical trim wheel is set to centre or neutral position. If the trim wheel is set well above centre i can take-off almost vertical. If the mechanical trim wheel is set well below centre, i can pull on the yoke all you want, you are not going to take-off. So the problem is ,the mechanical trim wheel . nebojsa

Thanks for the input , but Vertical rocker? What is it and how do you set it up. Nebojsa

I have a CH Products Flight Sim YOKE that has 3 levers on the right side, and a trim wheel on the left side. For a while now that trim wheel is giving me problems where it is difficult to set up. You can set the aircraft trim properly for take off , but if the little wheel is not set properly GOOD LUCK in taking off.Sometimes it is hard to find a setting on the little wheel, so that when you pull on the yoke for a take off you actually take off. Can that trim wheel be taken out from the yoke and the yoke still work? Is there a replacement part for the trim wheel? Nebojsa

FS9 real weather has not worked now for some time.You will need a third party download. There are some free ones and of course payware.

One thing is that since you cant use squawk-box and need swift, swift operates at a minimum of Windows 7. Unless somebody has figured out how to still use squawk-box. I miss squawk-box. nebojsa

I have windows 7, but dont use it .Never could figure out how to install the Airac. It was a nice plane to hand fly.The Eagleoft forum was not much help after their site crashed, and all of the topics before the crash have disappeared. nebojsa

They should be in the library section. nebojsa

Thanks for sharing your insight. Interesting reading. nebojsa