Jump to content

lcomer

Registered Users
 View Profile  See their activity

  • Posts

    20

  • Joined

 Content Type 

Everything posted by lcomer

  1. lcomer
    Thanks much. Yes, I did mean RPM's I will try this next flight.
  2. lcomer
    I have not flown this in awhile, and noticed today that when you set the throttle to 2500 as noted in most checklists I have seen, that this puts the airspeed in the yellow zone, almost 180 knots. You have to go down to almost 2100 knots to be in the safe zone. Also seems very unstable when trying to land. Just wandering if anyone else had issues.
  3. lcomer
    As far as I know yes they are. I have a thrust master unit and seems to work fine
  4. lcomer
    Sweet. Thanks much. I will try that out later.
  5. lcomer
    Not thing that does puzzle me about the Baron is what prop speed I should be setting it to at certain levels. I’ve tried looking online but almost every checklist I find has a different setting.
  6. lcomer
    Update. I have flown a few RNAV approaches and the plane behaves perfectly. Flies well and had no issues.
  7. lcomer
    I’ve only flown it a few times. It did not appear to be as stable as other aircraft. Just my humble Opinion. Not sure if it’s a quirk or an actual issue.
  8. lcomer
    Yes, the update resolved the issue I was having.
  9. lcomer
    Carenado replied to my email stating the last update from MS caused some issues and they are working to push updates
  10. lcomer
    Just purchased this add on, but noticed that there is no way to hide the yoke, even there appears to be some click spots on it. Really a pain because you have to turn the wheel to get to some switches etc. Anyone know of a trick to hide it?
  11. lcomer
    It happens repeatedly to me. The odd thing is that even with the PFD offline, the plane will still fly the route and lock on to the ILS signal at the approach airport. You just have to rely on the bubble gauges for speed and altitude. I have also noticed two things. 1. Quite often near the end of the flight, the PFD will mysteriously begin working on its own. 2. I cold started and set the ILS info before I started the engines. Went off anyway. Once airborne, I clicked the "Procedures" button again to see if I could reenter. There was a dinging sound and it came back online and worked fine the rest of the flight.?
  12. lcomer
    Thanks all. Much appreciated for the feedback. I will try to install this link.
  13. lcomer
    Thanks. I wish I had used a screen shot rather than an external pic. Anyway my settings: AMD Ryzen 5 2600 six core processor, with 16 GB memory, and a Nvida GeForce GTX 1060 graphic card with 3GB memory. Running windows 10 64 bit
  14. lcomer
    I am having a reoccurring issue in fs 2020. The issue is that that the main nav screen (One on the left in front of pilot) gets a white line through it and is inoperative. It will happen sometimes before the flight when you are setting the ILS data, and it has happened mid flight. I have uninstalled and reinstalled with no solution at all. I have also check the driver on my graphics card to ensure it is the latest. I will try to attach a screen shot to show what I mean. Anyone else had this occur? Apologise for the quality of the photo.
  15. lcomer
    So I was doing an ILS flight. At 5,000 ft the main glass cockpit went out to lunch. The GPS screen still worked, and I could use the NAV button to fly the selected route. I had to rely on the old altitude and airspeed gauges, but all other info was wacky. Strange thing, when I descended to 2100 for the ILS approach at the airport (turned alt hold off and used the VS to descend), everything came back on line? Still wish they had a gauge for the prop RPM.
  16. lcomer
    I had same issue. I went into profile then content manager to download and install all remaining aircraft. Not sure why but after I did that it put them all in my library.
  17. lcomer
    I noticed after the big Japan update that the Cessna 172 with the glass cockpit has an issue with setting the nav frequency. Neither the nav or com will work and clicking on the arrow to change it appears inoperative as well. Just wander if anyone else experienced it. I switched to the Beech Bonanza and it worked fine.
  18. lcomer
    When setting up an RNAV approach and inserting altitude on the flight plan page, fs2020 crashes every time?
  19. lcomer
    Lol. I didn’t know if it was intentional or another bug :)
  20. lcomer
    I did the latest update last night and immediately noticed the planes wobbling back and forth on runway just after loading them. I’ve tried various ones. They all do it??

Quick Links

Store  Links

Please note the Store and the forum use two (2) separate login systems. You need an account for each

Forums Rules - File manager Policy

×
×
  • Create New...