Jump to content

Kloyce1

Registered Users
 View Profile  See their activity

  • Posts

    25

  • Joined

 Content Type 

Everything posted by Kloyce1

  1. Kloyce1
    Thank you, that works slicker than a puppy dogs rear!!!
  2. Kloyce1
    Greatly appreciated!
  3. Kloyce1
    That did it! Thank you
  4. Kloyce1
    Ok I can try that, thanks
  5. Kloyce1
    I give up!!! The sim is much smarter than I am!!!!!!!! Not sure why it won't do what I would like to do, But I can get buy the way it is. So thank you for your input.
  6. Kloyce1
    CTRL+T will not turn altitude hold on or off Everything else seams to work OK
  7. Kloyce1
    Have you tried setting your flight model to modern?
  8. Kloyce1
    SAME HERE no ai traffic and no POI's showing
  9. Kloyce1
    POI,s missing after UK UPDATE The San Diego KSAN, and North Island updated scenery and my Carriers by supper spud are all showing in the sim but I don't have any POI,s to show me where Carriers are! I tried deleting them and reinstalling them rebooted sim ETC Everything else is working great! Need some help please! Thanks.
  10. Kloyce1
    I have been waiting for this!! Found it at Avsim https://secure.simmarket.com/hard-deck-simulations-functional-aircraft-carrier-msfs.phtml
  11. Kloyce1
    I suddenly lost all of my AI traffic! I could not figure out why until I remembered that I was had been running my medium spec PC on medium in game setting until I found out that if I set the game up to HIGH END and turned up the RENDEREING SCALING up to 130 then I was getting great graphics!!!!!! But all of my ai traffic was gone!! When I turned it back down to medium and rendering scaling back down to 100 my AI TRAFFIC CAME BACK! Hope this might help someone else!
  12. Kloyce1
    Just wanted to say thank you to everyone at flight sim for sharing all of your posts and help, I have been using this form since FSX and would not be where I am now without all of your help!!!!!!!!!!
  13. Kloyce1
    Have you tried to go to options, general, flight model, check to see if it is set to LEGACY or MODERN! Legacy is very hard to control, MODERN makes them flyable!!!! HOPE THIS HELPS
  14. Kloyce1
    THINK I FOUND THE PROBLEM THIS TIME READ IN ANOTHER POST MAKE SURE YOUR MODEL IS SET TO MODERN NOT LEGECY LIKE MINE WAS!!!!! OPTIONS, GENERAL, FLIGHT MODEL, CHANGE TO MODERN SAVE! This has been very frustrating to me also!! this makes them a little more sensitive on the runway, BUT you can take OFF and fly!
  15. Kloyce1
    when you go to the world map and select or tap your plane there should be a drop down under it' There you can select weights and balances, then payload, then pull the slider to the left to lower the payload. HOPE THIS WORKS FOR YOU!!!!
  16. Kloyce1
    I just removed 90% of my payload! The 172 and my 152 will now take off and fly great!
  17. Kloyce1
    thank you!!!!!!!!!!!!!! Nvidia settings didn't do it but turning on the photo geomerty fixed it thank again i ain't the sharpest tack in the box, so every little bit helps!!!!!!!!!
  18. Kloyce1
    I just discovered that all of the boats and yachts are missing around all of the piers etc. Will try to change nvidia setting to see if that helps Thanks
  19. Kloyce1
    Murph's law!!!!!!!! I seem to be the only one having trouble! There are no Navy ships showing in San Diego bay, they appear to be under water! Data settings set to medium, tried high still no ships. I've got ships etc all turned on. Thanks
  20. Kloyce1
    I have very bad case of CRS!! (can't remember STUFF) with that said, I think this all started or got much worse after the JAPAN update!
  21. Kloyce1
    I'm still having trouble also, tried about everything, weather, wind, controls! Not all planes do it as I said in my original post, some hardly at all, and others like the one we will call the Lear jet, can't remember it's name right now is almost uncontrollable roll violently to the right and left!!! Below 2000 ft!
  22. Kloyce1
    The only planes I can fly at low altitude are the Cessna and cub every thing else gets bounced all over the place at low altitude, get above 2000 ft and they smooth out! I have the weather set to clear shies and no wind!!! any help would be appreciated. thanks
  23. Kloyce1
    Yes
  24. Kloyce1
    Forgot to say that it shows in the menu to turn it on and off but doesn't show in the sim Thanks
  25. Kloyce1
    Developers Mode suddenly disappeared after windows 10 2004 update F11 key has never worked to change planes

Quick Links

Store  Links

Please note the Store and the forum use two (2) separate login systems. You need an account for each

Forums Rules - File manager Policy

×
×
  • Create New...