Josal Posted July 16, 2021 Share Posted July 16, 2021 I am setting up the MSFS2020 and trying to have cockpit camera views installed. However when I try to pan around by holding right mouse button the view immediately returns to centre view. This way I cannot set the cameras. In External cameras holding down the right mouse button and pan, works perfect. Any suggestions of how to correct this. Thanks in advance Link to comment Share on other sites More sharing options...
g7rta Posted July 16, 2021 Share Posted July 16, 2021 Why hold down the right button? Try pressing the middle button (wheel) & you should be able to pan around that way, without holding the button. Pressing the middle button a second time brings the cursor back. Regards Steve. Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Kloyce1 Posted July 16, 2021 Share Posted July 16, 2021 Why hold down the right button? Try pressing the middle button (wheel) & you should be able to pan around that way, without holding the button. Pressing the middle button a second time brings the cursor back. Regards Steve. Thank you, that works slicker than a puppy dogs rear!!! Link to comment Share on other sites More sharing options...
g7rta Posted July 16, 2021 Share Posted July 16, 2021 No problem. Glad to help :) Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Josal Posted July 16, 2021 Author Share Posted July 16, 2021 Thanks for answering. I tried what you have suggested but got no joy. During panning ( with wheel or right button) view moves up towards half the overhead panel and down half way of pedestal and quickly jumps back to original view, it does not hold. Any other suggestions as to solve this problem Thanks in advance, regards, Joe Link to comment Share on other sites More sharing options...
g7rta Posted July 16, 2021 Share Posted July 16, 2021 (edited) Sounds like your mouse is setup differently for some reason. Either that or you've got another device (yoke/joystick/keyboard..etc) that is also assigned. I'd check your mouse settings first. This is how mine looks (and I don't think I ever changed it from the default settings) Hope this helps Regards Steve Edited July 16, 2021 by g7rta Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Josal Posted July 16, 2021 Author Share Posted July 16, 2021 Hi Steve, Thanks for your suggestions. I have the mouse settings the same as yours. I have removed joysticks, throttle and keyboard, leaving only the mouse attached. Unfortunately I am getting the same results. Why is it that with the external view I do not have this problem? regards, Joe Link to comment Share on other sites More sharing options...
g7rta Posted July 16, 2021 Share Posted July 16, 2021 Hi Joe, try this... go to the general options page and click the camera tab on the left. Look for “FREE LOOK RESET†I’m guessing yours is set to Auto? Change it to manual. I’ve just tested it on mine and I think that’s it :) Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Josal Posted July 16, 2021 Author Share Posted July 16, 2021 Hi Steve, You just provided me with the solution. Very much appreciate the time taken to look for an answer to my problem and all the help you offered. Many thanks regards, Joe Link to comment Share on other sites More sharing options...
g7rta Posted July 16, 2021 Share Posted July 16, 2021 Hi Joe, no problem at all. Happy flying :) Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now