aheadwarp9 Posted February 19, 2021 Share Posted February 19, 2021 I have an older CH Flight Yoke and can't get the flight Axis to bind, elevator, aileron and throttle etc. I understand the process but when I go to validate, I get a warning that it's not recommended, then it shows it assigned but it stays frozen. If it assigns it for me, it will show either the axis +, or Axis- and acts like a switch. I'm sure I'm doing this correctly and have searched other posts and watched the videos. I have spent enough money already on this new computer and MSFS2020, and the wife doesn't want to hear me spending another $200 on a yoke. I have the rudder pedals working fine. Also, I set up the MS sidewinder joystick and manually assigned the axis with no problems. Anyone else have this issue? Chris Link to comment Share on other sites More sharing options...
kevars Posted February 23, 2021 Share Posted February 23, 2021 Same issue, works if assigning the plus or minus axis it works only in that direction but not the neutral or ranged axis. Has to be software issue since it works in X plane 11 Link to comment Share on other sites More sharing options...
kevinfolsom Posted February 24, 2021 Share Posted February 24, 2021 I had the same yoke. I could not get it to work in P3D V4.5 at all. I purchased a Honeycomb Alpha Yoke and have not been disappointed. It works exceptionally well in MSFS 2020. I disassembled my old CH Flight Yoke and discovered 2 wires were broken at the base of the unit. If I had disassembled my old yoke first and repaired the wires, would it still work in P3d and MSFS 2020? Who knows. But I am glad I updated my flight yoke. Maybe, some day, I will get the Honeycomb Bravo Throttle Quadrant. As for the problem with your spouse. I have no recommendations in that department. All I can say is that my wife loves my passion for flight simming because I am at home flight simming, instead of being at the bar doing "who knows what and who are you doing it with?". MSI MPG Z490 Gaming Plus Motherboard, I9-10900K 5.1 Ghz, 64 GB 3200 DDR4 Ram, Nvidia RTX 4080 16GB V-Ram, 1 TB NVMe M.2 Drive For Windows 11, 2 TB NVMe M.2 Drive For MSFS, 850W P/S, HP Reverb G2 VR Headset, Honeycomb Alpha Yoke, Honeycomb Bravo Throttle Unit, Saitek Pro Flight Combat Rudder Pedals. Link to comment Share on other sites More sharing options...
kevars Posted February 24, 2021 Share Posted February 24, 2021 I don't think it is a hardware issue since the controller works no problems in other games. I've spent hours trying to get it to work. I will give up and hope a future update will fix it. Could be a issue with my rig. Link to comment Share on other sites More sharing options...
aheadwarp9 Posted February 27, 2021 Author Share Posted February 27, 2021 Kevars knows what I'm taking about. It is frustrating because i have read other posts where the CH flight yoke is working, but not for me. I just spent alot of $$$ to build a new system, and then went through hell trying to get a decent graphics card. and now I have to purchase a new yoke. If anyone has a solution, I would love to hear it. Link to comment Share on other sites More sharing options...
dashort3 Posted February 27, 2021 Share Posted February 27, 2021 Sorry to type to you that I have an old CH yoke that is working. The difference that I can see is that all the assignments I did were in the second box. It doesn't really say it anywhere but the first box is primary and the second of course is secondary control. I did the assignments after the first install and have not had to reconfigure after any of the updates even when it seems to be a full re-install but something may have caused a bug. Link to comment Share on other sites More sharing options...
aheadwarp9 Posted May 29, 2021 Author Share Posted May 29, 2021 OK, Problem solved with the latest update/patch on 5/28/21. I waited months before I bought this game so the bugs would be worked out. I should have waited a year. I bought a new yoke because the CH one would not work... until now. IRONY... Link to comment Share on other sites More sharing options...
dogdish Posted May 30, 2021 Share Posted May 30, 2021 I saw that big update for CH Products and dragged all my controllers out and set them up no issues. Just one question though. Is it possible to add a image as the default image is the generic controller blank? Maybe a .jpg dropped into a certain folder? Gigabyte GA-X99 Gaming G1, i7-5960X, Noctua NH-D14, Crucial Ballistix Elite 64Gb, Nvidia GTX Titan X, Creative ZxR, Ableconn PEXM2-130, WD Black SN750 250Gb & 2Tb NVMe/Gold 10Tb HDD, Sony BDU-X10S BD-ROM, PC Power & Cooling 1200w, Cosmos C700M, Noctua iPPC 140mm x6, Logitech M570/K800, WinX64 7 Ultimate/10 Pro Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now