waymon Posted January 24, 2021 Share Posted January 24, 2021 (edited) Does anybody know if there's a way to add reverse thrust to the Logitech throttle quadrant? it has a detent past idle that can be programmed but I can't figure out how to put the reverse there. Thanks for any help. P.S I added toggle reverse thrust to that detent but the engine still won't feather the props to reverse! Edited January 24, 2021 by waymon Processor: AMD Ryzen 9 5900X 3.7 GHz /Graphics: Red devil RX6800XT 16GB /MB: X570 Gaming WiFi / ram: 32GB@3600 MHz /500GB M.2 Drive /1TB SSD /3-Asus 27" Displays. Link to comment Share on other sites More sharing options...
sfojimbo Posted January 24, 2021 Share Posted January 24, 2021 Were your wheels on the ground? With transport aircraft reverse thrust won't engage unless there is weight on the landing gear and I think that's true for all aircraft. i7-10700K, ASUS Prime Z490-P motherboard, 32 gig, GTX 1080 Ti, 1TB M2 drive, Thrustmaster T16000M, Logitech Rudder Pedals , xbox controller. Link to comment Share on other sites More sharing options...
tiger1962 Posted January 24, 2021 Share Posted January 24, 2021 Does anybody know if there's a way to add reverse thrust to the Logitech throttle quadrant? it has a detent past idle that can be programmed but I can't figure out how to put the reverse there. Thanks for any help. P.S I added toggle reverse thrust to that detent but the engine still won't feather the props to reverse! See this thread on the official forums: https://forums.flightsimulator.com/t/cant-reverse-axis-on-logitech-g-pro-flight-throttle-quadrant/194053 Tim Wright "The older I get, the better I was..." Xbox Series X, Asus Prime H510M-K, Intel Core i5-11400F 4.40GHz, 16Gb DDR4 3200, 2TB WD Black NVME SSD, 1TB Samsung SATA SSD NVidia RTX3060 Ti 8Gb, Logitech Flight Yoke System, CH Pro Pedals, Acer K272HL 27", Windows 11 Home x64 Link to comment Share on other sites More sharing options...
dnpaul Posted January 24, 2021 Share Posted January 24, 2021 Does anybody know if there's a way to add reverse thrust to the Logitech throttle quadrant? it has a detent past idle that can be programmed but I can't figure out how to put the reverse there. Thanks for any help. P.S I added toggle reverse thrust to that detent but the engine still won't feather the props to reverse! I have the same Logitech throttle. It's tricky to make it work properly. It treats that reverse detent position like a button, so you have to "press" it once and quickly, or it will toggle back and forth between reverse and forward thrust. Once you have landed and quickly "pressed" the reverse throttle button, you have to move the throttle lever forward to actually apply thrust to the now reversed prop or turbofan engine. You have to "press" it again to take it out of reverse condition. It takes a little practice to get it right. Link to comment Share on other sites More sharing options...
waymon Posted January 24, 2021 Author Share Posted January 24, 2021 Were your wheels on the ground? With transport aircraft reverse thrust won't engage unless there is weight on the landing gear and I think that's true for all aircraft. Yes I was on the ground Processor: AMD Ryzen 9 5900X 3.7 GHz /Graphics: Red devil RX6800XT 16GB /MB: X570 Gaming WiFi / ram: 32GB@3600 MHz /500GB M.2 Drive /1TB SSD /3-Asus 27" Displays. Link to comment Share on other sites More sharing options...
waymon Posted January 24, 2021 Author Share Posted January 24, 2021 I have the same Logitech throttle. It's tricky to make it work properly. It treats that reverse detent position like a button, so you have to "press" it once and quickly, or it will toggle back and forth between reverse and forward thrust. Once you have landed and quickly "pressed" the reverse throttle button, you have to move the throttle lever forward to actually apply thrust to the now reversed prop or turbofan engine. You have to "press" it again to take it out of reverse condition. It takes a little practice to get it right. Thanks I will try that Processor: AMD Ryzen 9 5900X 3.7 GHz /Graphics: Red devil RX6800XT 16GB /MB: X570 Gaming WiFi / ram: 32GB@3600 MHz /500GB M.2 Drive /1TB SSD /3-Asus 27" Displays. Link to comment Share on other sites More sharing options...
waymon Posted January 24, 2021 Author Share Posted January 24, 2021 I have the same Logitech throttle. It's tricky to make it work properly. It treats that reverse detent position like a button, so you have to "press" it once and quickly, or it will toggle back and forth between reverse and forward thrust. Once you have landed and quickly "pressed" the reverse throttle button, you have to move the throttle lever forward to actually apply thrust to the now reversed prop or turbofan engine. You have to "press" it again to take it out of reverse condition. It takes a little practice to get it right. MAN! that worked! I've been trying to to get that done sense I've had this flight sim. Thank you very much for your help. Processor: AMD Ryzen 9 5900X 3.7 GHz /Graphics: Red devil RX6800XT 16GB /MB: X570 Gaming WiFi / ram: 32GB@3600 MHz /500GB M.2 Drive /1TB SSD /3-Asus 27" Displays. Link to comment Share on other sites More sharing options...
loup Posted January 25, 2021 Share Posted January 25, 2021 Had the the same issue with my VirtualFly TQ6 but resolved it with the purchase of FSUIPC. I use that to assign and calibrate the levers and all is golden now :-) LouP PS. using FSUIPC the process is analog just like the real thing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now