SteveVO Posted November 17, 2020 Share Posted November 17, 2020 Ever since the 10.11 update, I have had an issue. If I go to world and simply pick my local general aviation airport (Butler County just north of Cincinnati) and try to takeoff, I cannot. With joystick pulled all the way back, all I do is 'skim' down the runway at about 10 feet altitude! I have checked in 'Controls' and joystick is working fine on a 3 main axes. But, I go to one of the training scenarios, it works ok. Overall, a Cessna 172 doesn't fly like it did in previous updates. It seems to be more squirrely. I've flown them for real many times. Anyone else having this issue? Thanks, Steve Link to comment Share on other sites More sharing options...
tiger1962 Posted November 17, 2020 Share Posted November 17, 2020 Are you in Legacy mode? If so, change it to Modern in Options/Flight Model. The Legacy mode will only be active in 'free flight', that's why you can still fly as normal in a mission/training flight, but it should only be used if flying an FSX imported plane. Tim Wright "The older I get, the better I was..." Xbox Series X, Asus Prime H510M-K, Intel Core i5-11400F 4.40GHz, 16Gb DDR4 3200, 2TB WD Black NVME SSD, 1TB Samsung SATA SSD NVidia RTX3060 Ti 8Gb, Logitech Flight Yoke System, CH Pro Pedals, Acer K272HL 27", Windows 11 Home x64 Link to comment Share on other sites More sharing options...
shb7 Posted November 18, 2020 Share Posted November 18, 2020 Are you in Legacy mode? If so, change it to Modern in Options/Flight Model. The Legacy mode will only be active in 'free flight', that's why you can still fly as normal in a mission/training flight, but it should only be used if flying an FSX imported plane. I had one plane that was flying terrible in fsx mode, and I changed it to modern, and it worked fine. Then, I had another plane, that was flying terrible in modern mode, and I changed it to fsx mode, and it worked fine. They were both planes that came with fs2200. Link to comment Share on other sites More sharing options...
collltip Posted November 18, 2020 Share Posted November 18, 2020 I can not drag 152 up without near full elevator trim. Link to comment Share on other sites More sharing options...
plainsman Posted November 18, 2020 Share Posted November 18, 2020 Did you check to make sure you are in modern?! Did you calibrate your controller with joy.cpl? I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
sfojimbo Posted November 19, 2020 Share Posted November 19, 2020 You didn't mention elevator trim. Is it heavily trimmed nose down? i7-10700K, ASUS Prime Z490-P motherboard, 32 gig, GTX 1080 Ti, 1TB M2 drive, Thrustmaster T16000M, Logitech Rudder Pedals , xbox controller. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now