learpilot Posted August 26, 2020 Share Posted August 26, 2020 I have a Throttletek !! I cannot get the flaps to go in increments just 0 to full how about you guys ??any suggestions Link to comment Share on other sites More sharing options...
stempski Posted August 26, 2020 Share Posted August 26, 2020 Make sure your assignment is to "Increase Flaps" and "Decrease Flaps" - which means you need to separate activators(Button, rocker, switch) DO NOT use "Continuous" or "Extend" or "Retract". Increase and Decrease are incremental. Asus Z590 P, Intel I7-10700K, nVidia RTX 4070, 64gb ram(3200), 2 nvme ssd (2 tb total), Samsung QN90B 43" 4k@120hz, Bose Companion 5 PC speakers, Velocity Flight One Link to comment Share on other sites More sharing options...
learpilot Posted August 26, 2020 Author Share Posted August 26, 2020 That where its assigned and it shall goes from 0 to full flaps Link to comment Share on other sites More sharing options...
Babyboomerboy Posted August 26, 2020 Share Posted August 26, 2020 I am using my T5/6 toggle switch on my Logitech Pro Throttle Quadrant. I did notice that if I hold the switch down to long the flaps move 100% so I just tap it and release it and everything is fine. Hopes this helps Link to comment Share on other sites More sharing options...
stempski Posted August 26, 2020 Share Posted August 26, 2020 That where its assigned and it shall goes from 0 to full flaps are they mapped to two separate buttons, a toggle (up/Down) switch or a rocker(left/right) ?? Asus Z590 P, Intel I7-10700K, nVidia RTX 4070, 64gb ram(3200), 2 nvme ssd (2 tb total), Samsung QN90B 43" 4k@120hz, Bose Companion 5 PC speakers, Velocity Flight One Link to comment Share on other sites More sharing options...
learpilot Posted August 26, 2020 Author Share Posted August 26, 2020 It's a flap lever like the real thing !! It's on a throttletek Link to comment Share on other sites More sharing options...
learpilot Posted August 27, 2020 Author Share Posted August 27, 2020 very maddening it goes from 0 to full flaps Link to comment Share on other sites More sharing options...
stempski Posted August 27, 2020 Share Posted August 27, 2020 which throttletek model do you have? the GF14 or G737v2? Can you take a screen shot of your flap assignment from your Control profile? please Asus Z590 P, Intel I7-10700K, nVidia RTX 4070, 64gb ram(3200), 2 nvme ssd (2 tb total), Samsung QN90B 43" 4k@120hz, Bose Companion 5 PC speakers, Velocity Flight One Link to comment Share on other sites More sharing options...
learpilot Posted August 27, 2020 Author Share Posted August 27, 2020 which throttletek model do you have? the GF14 or G737v2? Can you take a screen shot of your flap assignment from your Control profile? please I have The Lear 45 it wont let me post a pic Link to comment Share on other sites More sharing options...
stempski Posted August 27, 2020 Share Posted August 27, 2020 Nice... a $1200 throttle that won't work. I can understand why your upset. It looks like its an Axis controller. Assign it to flaps axis(0 to 100+)... check to make sure it works correctly - up should be zero...down 100...if not...click the reverse box. Your flaps axis is not able to do increments, but you do have marks on your device that tells you how much flap your applying. you should be good to go. Asus Z590 P, Intel I7-10700K, nVidia RTX 4070, 64gb ram(3200), 2 nvme ssd (2 tb total), Samsung QN90B 43" 4k@120hz, Bose Companion 5 PC speakers, Velocity Flight One Link to comment Share on other sites More sharing options...
LJ45man Posted August 29, 2020 Share Posted August 29, 2020 I have a Throttletek Lear 45 Throttle Quadrant and flaps work perfectly fine. Send me a private note with your email and I will see if I can help you get set up. Link to comment Share on other sites More sharing options...
Kapitan Posted August 29, 2020 Share Posted August 29, 2020 He has the settings for that input wrongly selected in Options. Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
learpilot Posted August 30, 2020 Author Share Posted August 30, 2020 Do you have to eliminate assignments on the keyboard for your throttle and flaps to work properly ???? Link to comment Share on other sites More sharing options...
Stevemill Posted August 30, 2020 Share Posted August 30, 2020 Nice... a $1200 throttle that won't work. I can understand why your upset. It looks like its an Axis controller. Assign it to flaps axis(0 to 100+)... check to make sure it works correctly - up should be zero...down 100...if not...click the reverse box. Your flaps axis is not able to do increments, but you do have marks on your device that tells you how much flap your applying. you should be good to go. Maybe also check and play with the axis sensitivity settings? Link to comment Share on other sites More sharing options...
rkl122 Posted August 30, 2020 Share Posted August 30, 2020 Do you have to eliminate assignments on the keyboard for your throttle and flaps to work properly ????No. FS 2020 deluxe; SDK to match; Win10 Pro x64; i7/8700K(3.4 GHz); 16G DDR4, 3200; Gtx 1080; M.2, 1TB; Saitek X52; 23" LCD, native res=1920x1080 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now