Kapitan Posted August 18, 2020 Share Posted August 18, 2020 Dont let the ignorance on issues from people who dont know how to do things fool you. The sim is nearly perfect. I also was struggling how to configure hat switch or other small doubts, but with a little patience all is being sorted When you read the thread titles here and the amount of "how do you do this" "unable to install" "something happened, where is xxx" "missing this and that" remember: its the user's impatience or something wrong he did The game is fine, fast and smooth even in high end settings at 1920x1080 My system is below average i5 3600hz 16ram gtx 1060 3gb and at high end i get 60fps For higher resolutions obviously its best to have a better system Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
Kapitan Posted August 18, 2020 Author Share Posted August 18, 2020 There are so many features the learning curve takes time, Specially to understand folder and file structure that will enable better tweaks in future. Everything needs to be explored and the discovery is part of the fun Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
plainsman Posted August 18, 2020 Share Posted August 18, 2020 Yes, I am running between Ultra and High with no problem at 1920x1200. If i was driving 1440p it might be a different story? I7-9700K, RTX 2070, 32gb 3000, and a fast internet connection. I don't notice any of the stutters some have mentioned? The FDE isn't as good as I expected, at least on the few I have tried. I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
Kapitan Posted August 18, 2020 Author Share Posted August 18, 2020 helps reducing joystick sensitivity and increasing the zero zone If you dont do this it becomes too sensible and you think FDE is bad Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
pmplayer Posted August 18, 2020 Share Posted August 18, 2020 The game is fine, fast and smooth even in high end settings at 1920x1080 Sorry, but high end setting for me is 4K... How is that? regards Link to comment Share on other sites More sharing options...
plainsman Posted August 18, 2020 Share Posted August 18, 2020 (edited) By FDE incorrect, with the Cessna Longitude, I was climbing at 2600 feet/min, at 456 knots at 20,000 feet. The auto throttle didn't engage. That thrust is way way too high to climb that steeply that fast, particularly at that altitude. Edited August 18, 2020 by plainsman I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
Kapitan Posted August 18, 2020 Author Share Posted August 18, 2020 funny i only flew the 152 cause i dont like glass cockpits. And couldnt make the plane pass 80 kts on slight climb of 500 ft pm Felt its underpowered or better say realisticaly powered Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
plainsman Posted August 18, 2020 Share Posted August 18, 2020 The light props I have tried seem to be better modeled. I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
andrebr2 Posted August 18, 2020 Share Posted August 18, 2020 That´s my problem...I could not manage to configure my CH Flight Sim Yoke until now Link to comment Share on other sites More sharing options...
Kapitan Posted August 18, 2020 Author Share Posted August 18, 2020 You must do it manually, assign every axis, throttle and hat switch using the left column, not the right on Camera, the LOOK is for each POV left right up and down to enable hat and pan Kapitan Anything I say is...not as serious as you think Link to comment Share on other sites More sharing options...
plainsman Posted August 18, 2020 Share Posted August 18, 2020 Here is the A320 at 34,000 feet, N1=83% IAS=318, Mach 0.86. It is set to Mach 0.78?? The thrust is too high, it was climbing at 4,000 Ft/min at 285knots at FL240. I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
pmrose Posted August 18, 2020 Share Posted August 18, 2020 I agree!! This sim is awesome! Still have a lot of control tweaking to do, but loving it!! Link to comment Share on other sites More sharing options...
richiemo Posted August 18, 2020 Share Posted August 18, 2020 good news on the 60 fps. That alone may make me buy this. That's why I've stuck with FS9 all these years. I need 60 fps. I'll buy whatever rig I need and looks like you are getting with i5. I have i7. Thx for feedback Link to comment Share on other sites More sharing options...
andrebr2 Posted August 18, 2020 Share Posted August 18, 2020 How I see my fps? Link to comment Share on other sites More sharing options...
plainsman Posted August 18, 2020 Share Posted August 18, 2020 I am running 1920x1200 on mixture of ultra and high settings, and my fan speeds are less than with X-Plane. I have fps limited to 30, but it will do 60 if I would turn that up, maybe not in the big cities, I don't usually fly there. I7-9700K RTX2070, 32 gb 3000 memory, good internet connection. I7-9700K, RTX-2070, Asus Strix Z-390-H MB, 32gb G Skill 3000 CL15, Corsair Obsidian 750D case, WD Black 1tb M.2, Crucial CT500MX SSD, Seasonic Prime 750W Titanium PSU Link to comment Share on other sites More sharing options...
mjhopkins Posted August 18, 2020 Share Posted August 18, 2020 I agree that flying vfr is great, but there are still many issues: I can'f figure out how to pause a flight, save it, and come back to it later Can' get back to a settings page without exiting FS and re-starting it Flying the 172 with the GARMIN panels, can't find Lat and Lon anywhere Autopilot not functioning properly sometimes not at all Live weagther seems to be always clear skies?? Don't believe it That's if for the moment... It has the potential to be excellent ++ but got a way to go Link to comment Share on other sites More sharing options...
Elvensmith Posted August 18, 2020 Share Posted August 18, 2020 Pause is the... Pause key. To save a flight in progress Escape then spacebar. I just passed over Southampton in the microlight and was getting low cloud broken in places which seems right (about 60 miles south of where I'm sitting). Loads of reports though that AP is foobared both on the GA and tubes so I'm going to stick with handflying until it's fixed. Vern. Link to comment Share on other sites More sharing options...
FrankR409 Posted August 18, 2020 Share Posted August 18, 2020 Pause is the... Pause key. To save a flight in progress Escape then spacebar. I just passed over Southampton in the microlight and was getting low cloud broken in places which seems right (about 60 miles south of where I'm sitting). Loads of reports though that AP is foobared both on the GA and tubes so I'm going to stick with handflying until it's fixed. Set AP on the 172 for heading and altitude, no issue. I9-10900kf, gtx3090, 32gb ddr 4 3200mhz, 2TB M.2 PCIe NVMe SSD internet - 300+ mbs / Honycomb Alpha yoke, Alienware monitor 34 inch @ 3440 x 1440 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now