gypsymoth Posted July 6, 2018 Share Posted July 6, 2018 Windoze 7, FS2004. The grass suddenly went from this: to this: & I'm hoping a clever person might be able to tell me why & how to rectify it.................. I have FS9 in 2 other machines & they're both OK...... Link to comment Share on other sites More sharing options...
zswobbie1 Posted July 6, 2018 Share Posted July 6, 2018 Wow, the first picture is great. What grass is that? Robin Cape Town, South Africa Link to comment Share on other sites More sharing options...
johnhinson Posted July 6, 2018 Share Posted July 6, 2018 More importantly, where is it? Is it near an add-on airport? Some add-ons with their own textures in a wrong format will cause ground textures to go blurry as you get close. John http://www.adventure-unlimited.org My co-pilot's name is Sid and he's a star! Link to comment Share on other sites More sharing options...
gypsymoth Posted July 6, 2018 Author Share Posted July 6, 2018 FS2004/GoldenWings3. I make my own WW2 airfields & the textures are from Sbuilder. I use ADEX9 for the ground work. This is the first time I've seen bmp textures look wonky in the 10 yrs I've been making airfields. It's happened in one of three machines. The picture is a MkV Spitfire taking off from RAF Ibsley, one of 5 or 6 in or near the New Forest. Link to comment Share on other sites More sharing options...
gypsymoth Posted July 7, 2018 Author Share Posted July 7, 2018 I've updated the drivers for the 3GB AMD RADEON R9 280X grahics but nothing's changed. Link to comment Share on other sites More sharing options...
gypsymoth Posted July 7, 2018 Author Share Posted July 7, 2018 I've never come across this before. I thought I'd better check display settings & spotted the terrain detail land & water slider was left at zero when it should have been to the right. Instant change!! I assumed once set they stayed set but....... Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 7, 2018 Share Posted July 7, 2018 You say the textures are from SBuilder, but I have not come across that grass texture and I use SBuilder too. Which one is it, by name? Link to comment Share on other sites More sharing options...
gypsymoth Posted July 7, 2018 Author Share Posted July 7, 2018 Well, I use Sbuilder with Adex9 but with/in FS9/GoldenWings3. Do you have GW3 ? When choosing the texture the drop down menu has a list & the grass in the screenshots is near the top. Link to comment Share on other sites More sharing options...
Men In Black Posted July 7, 2018 Share Posted July 7, 2018 Glad you got it fixed. I was about to recommend checking those sliders, because they may just be the culprits, and because it's such an obvious thing to check out, you may ignore or forget about them completely. I should know, because it happened to me too several years ago. Speaking of addon grass textures for FS9, I use the freeware PicNic by Aimé Leclercq, it has several grass, snow, desert/sand etc textures you can chose from, and it works in FSX too. It's really nice. Link to comment Share on other sites More sharing options...
gypsymoth Posted July 7, 2018 Author Share Posted July 7, 2018 Hello. I've never had a setting undo itself which is why I was stumped. It's an obvious thing to check now & in the future in light of recent events !! I've not heard of PicNic. If I should attempt another airfield I'll try it. You screenshots look great. Cheers. Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 8, 2018 Share Posted July 8, 2018 I am going to search out Golden Wings 3. I may get back to you for a compass course if I don't find them (the wings). Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 8, 2018 Share Posted July 8, 2018 I am slightly worried as to where GW3 will install itself with the auto installer? I do not want to modify FS9 in any way except to be able to use the ground textures within SBuilder. Please advise! Link to comment Share on other sites More sharing options...
zswobbie1 Posted July 8, 2018 Share Posted July 8, 2018 Simple, just tell the installer to install to a temp directory. If I recall, there are 3 Golden Wings files, including updates. Robin Cape Town, South Africa Link to comment Share on other sites More sharing options...
gypsymoth Posted July 8, 2018 Author Share Posted July 8, 2018 Good morning. It's been so long since I got GW3 & besides, I run both FSGW3 & FS9. All my WW2 airfields are in FSGW3. I've put some into FS9 to simulate the unused airfields seen today. Why not copy FS9 & then run the GW3 installer, & then check out the texture folders of both to see what's what. There used to be a great forum at The Old Hangar but that is no more. Your best bet for advice is FSDeveloper at https://www.fsdeveloper.com/forum/ I've used them & they'll help - there are GW3 users there. I hope this helps? Terry. I cobbled a website to show RAF Ibsley which was a busy fighter base about 4 miles away. I was about 4 or 5 & remember seeing aircraft on the perimeters with huge yellow tipped props waiting to take off. It closed soon after. http://www.rafibsley.com/ There are some other local airfields I've made here as well....Hurn, Stoney Cross, Warmwell etc. & Advance Landing Grounds. Link to comment Share on other sites More sharing options...
gypsymoth Posted July 8, 2018 Author Share Posted July 8, 2018 This is the Texture folder from FSGW3. The grass in my screenshots is the top left 'taxi grass su'. Ignore my oddities - I edit textures to get what I want. Try swapping fs9 grass with a FSGW3 texture & see what happens........... Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 8, 2018 Share Posted July 8, 2018 I will do that, I mean swapping textures. If you knew how much scenery I have you would understand why making a copy of fs9 is an hours long task. Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 8, 2018 Share Posted July 8, 2018 I installed FSGW3 and did not get anything like your grass textures! Do me a favour and email that "taxi grass su" to me please? rogwen at rogers dot com Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 8, 2018 Share Posted July 8, 2018 Or even better, zip them up and email them all? Link to comment Share on other sites More sharing options...
zswobbie1 Posted July 8, 2018 Share Posted July 8, 2018 Found it, now to compare that grass to the grass from Howard's TNW. Robin Cape Town, South Africa Link to comment Share on other sites More sharing options...
zswobbie1 Posted July 8, 2018 Share Posted July 8, 2018 https://www.dropbox.com/s/hn7id2lzrvy9atg/taxi_grass_su.zip?dl=0 Robin Cape Town, South Africa Link to comment Share on other sites More sharing options...
gypsymoth Posted July 8, 2018 Author Share Posted July 8, 2018 Experiment: texture 1 zswobbie1, 2 gypsymoth's FS9 & 3 gypsymoth's FSGW3 I don't know how my FSGW3 has these textures but I'll email them if your FSGW3 hasn't got them. Have you tried Sbuilder yet with gw3 ? Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 8, 2018 Share Posted July 8, 2018 The textures I got with FSGW3 were no better than the standard grass textures that came with FS9. They were all made to be looked at from 1,000 feet up. The one you loaded up for me is the same. I opened them with Photoshop for a good look and there are no individual grass blades visible in the way that they show up in your first screenshot. You can only get what shows in the textures. By all means send me the other three but from what I can see of them I expect the same result. Link to comment Share on other sites More sharing options...
gypsymoth Posted July 8, 2018 Author Share Posted July 8, 2018 The screenshot of 3 textures were how I saw them. zswobbie1's looked just like my fs9 but the FSGW3 was completely different. I'll send what I have in my GW3 in a zip. Link to comment Share on other sites More sharing options...
Roger Wensley Posted July 9, 2018 Share Posted July 9, 2018 The 1183 grass in your illustration on here is 100% not the texture to produce that grass in the first pic. What made you think that it was? If you use that now do you get the grass texture in the pic? The ones that you sent by email, where are they in your set up, the main FS9 texture folder? I tried them in there and they did not link to 1183 grass when I tried to select them under their texture names. I am trying to see which textures SBuilder picks up when the "assembled" route is used for a ground texture instead of the simple "classes" route, so if anyone knows? Link to comment Share on other sites More sharing options...
zswobbie1 Posted July 9, 2018 Share Posted July 9, 2018 Strange... the texture I sent was from my GW3! I'll sent another from from TNW. https://www.dropbox.com/s/p18qzy6kg98gkjq/taxi_grass_su%20from%20TNW.zip?dl=0 Robin Cape Town, South Africa Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.