Jump to content

CH Yoke


Recommended Posts

Hi Bob,

1/4 - 20 x 4 1/2"

That is 1/4 inch, 20 threads per inch by 4 and 1/2 inches long. Hope that translates!

It's likely that the nut inside has turned in the pocket in which it sits. By using a very skinny long Philips screwdriver it's possible to loosen the screw that must be loosened to open the case. Twist the clamp so you have the maximum opening of the adjacent hole exposed to get to the screw. Perhaps, cleaning the bolt threads and a new nut will be all that's needed. Oh, and building up the enlarged pocket with epoxy so the nut doesn't turn.

Jim F

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...