Search the Community
Showing results for tags 'project airbus'.
-
Version 1.0.0
48 downloads
This is a repaint for Project Airbus' Airbus A380 in a fictional Canadian Airlines livery. Includes base model, high-quality textures, and updated VC. Mask Options This livery also includes cockpit window "Mask Options". Please see the included readme in the .zip file for instructions for applying these options. Canadian Airlines never flew the A380, as by the time the company was absorbed by Air Canada in 1999, the aircraft did not exist. The largest aircraft flown by Canadian Airlines was the Boeing 747-427. However, in our new universe, Canadian Airlines has taken delivery of one single Airbus A380, available to fly any route of your choice. It flies under the registration C-CSPN and the tail number 383. Livery Info Upon its founding in 1987, Canadian Airlines revealed its new livery using the colours light grey, dark grey, navy blue, and red. The paint scheme was an adaptation of the recently introduced livery from its predecessor Canadian Pacific Airlines. The lower half of the aircraft's body was navy blue, topped with light grey and red stripes, while the tail was blue, with approximately one-third taken up by the carrier's new logo. The new Canadian Airlines logo was a combination of Canadian Pacific's five grey stripes, representing the five continents served by the carrier. Over these stripes was a thick, bright red chevron. The chevron was a simplification of the Pacific Western Airlines logo. The chevron was placed over the stripes, which then represented "Wings over 5 continents". It was also an ingenious and subtle way to represent the takeover of CP by PWA. The same logo, in a square form, became a clever alternative to a true bilingual name on the fuselage replacing the French "e", and the third "a" in English (Canadian/Canadien).-
- canadian airlines
- airbus
- (and 12 more)
-
90 downloads
FSX Royalair Philippines Airbus A320-214 RP-C9799 and A320-232 RP-C7936, both repainted by me, model by Project Airbus. Read me file, effects, gauges, sound and airplanes folders are in the zip file. You just have to unzip it, and follow the instructions in the readme txt file. It may not work in FS2004 or P3D, since it's not tested in these sims. Required File:-
- project airbus
- projectairbus
-
(and 3 more)
Tagged with:
-
-
- project airbus
- projectairbus
-
(and 5 more)
Tagged with:
-
Another repaint done this morning. This aircraft actually only got resprayed in real life about 5 days ago at East Midlands and flew out to Zurich a couple of days later. Enjoy!
-
Having downloaded a few repaints for the fs9 PA A380, I have noticed that several of them come with virtual cockpit textures. However, from what I have found in the library, the only ones which I have seen mention having a VC are ones which use a virtual passenger cabin feature, not an actual virtual cockpit for player/pilot to fly from. Example of this being the fictional Virgin Atlantic PA A380 repaint addon which has VC cockpit textures, but all the models I have found only use a default, Virtual Cabin, or WV(Wing view I presume) model. Any ideas on where I can find the non-virtual cabin VC model for fs9? Thanks! Tristar35 Link to the information I saw indicating that a fs9/fs2004 PA A380 addon existed: https://www.fly-euroharmony.com/forum/index.php?topic=6951.0
-
Good Afternoon all, I have been trying to find someone who would be willing to do a fictional repaint for me on the Project Airbus A321-231 (IAE) in XL Airways colours. Lets just say repainting is not a strong asset I possess :) Of course I appreciate repaints take time and I'd be grateful if anyone was able to assist. Ideally I am looking for a fleet of aircraft but lets start with this one. Please let me know if you are able to assist. Many thanks
- 2 replies
-
- a321-231
- project airbus
-
(and 1 more)
Tagged with:
-
Hi, After transferring my FSX models to P3D with some success, I have gotten the standard A32X models to work perfectly. However, none of the sharklet models are appearing. It seems like the more recent model should be up to date with the 64-bit platform, right? Does anyone have a P3D sharklet model, or a solution to get them to work?
- 3 replies
-
- model
- project airbus
-
(and 1 more)
Tagged with:
-
Hello, Yesterday, I downloaded the Project Airbus A319 (this file, to be exact: https://simviation.com/1/download-file?file=a319_aa_pack.zip&fileId=55867) and decided to fly a short IFR flight with it today. When the tug turned my aircraft, the VC just disappeared. Everything was fine until that... If I look right or left, the VC appears again. I looked up on google and found this thread (https://www.flightsim.com/vbfs/showthread.php?313777-Project-Airbus-A320-VC-Erratically-Disappearing) about the same issue, but with the Project Airbus A320. I made the correction in the aircraft.cfg file but the VC is still disappearing, when I'm turning with the plane. Any ideas how to fix it? Thank you, Csanád
-
- a319
- project airbus
-
(and 2 more)
Tagged with:
-
Hello, I have three problems with my Project Airbus A320 Family: 1. With taking off the nose won't lift off at Vr speed (150 knots), but would lift off at 200 knots and after overrunning the runway (it lifts off very slowly and I have to put all of my power on the joystick), after lifting off it will immediately go into a steep climb and is it almost impossible to put the nose down (only when I reduce the throttles but it will lead the plane into a stall if I don't increase the throttles quickly) 2. When reaching 25,000 feet I hear a "ping" and notice that the IAS on the autothrottle has switched by himself to Mach, and I see the throttles increasing, I try to put it back to IAS but no success, even after turning off the autothrottle (and reduced the throttles a bit) it won't go back to IAS. I even immediately descended when reaching 25,000 feet and after hearing the "ping" and to my shock after I changed it back to IAS with success below 25,000 feet I see that the IAS indicates 999 knots on the autothrottle for some reason 3. The Engine will start up very slowly when I press on Engine one under the throttles and on eng BLEED on the overhead (I am using basically the same method on the A320 Fam as on the 737) So, am I doing something wrong? Do I need to change something in both the aircraft.cfg and panel.cfg? If yes: Where and how? Thanks in advantage
- 2 replies
-
- autopilot
- project airbus
-
(and 2 more)
Tagged with:
-
Hi guys, Was just wondering if anyone would be kind enough and interested in doing a Congo Airways repaint for the PA CFM A320. I have attached a photo which is not my own:). Many thanks.
-
- airbus a320
- project airbus
-
(and 2 more)
Tagged with: