DreamFleet1 Posted March 12, 2005 Share Posted March 12, 2005 Hello all, For those new to using what is essentially a "real" Garmin 430 that is in the Archer III or A36, take the advice of someone who owns a real Garmin 430 that is in a real plane. 1. Download the 430 manual(s) from Garmin, and open it in a Window. http://www.garmin.com/products/manual.jsp?product=010-00139-11 2. Run the 430 Trainer on its own, no need to run the Beech A36. 3. Now, with manual on one half of your screen (the top half should work), and the trainer on the other half (the bottom half) this is very easy. The trainer will allow you to conduct simulated "flights", easier than if you had to do the same in the A36. As you read the manual, you can play with all the functions. 4. Transfer what you have learned to the Archer III or A36, just as I did with the real 430 in my Piper Dakota. This is how I learned to use the real 430, and I would do it this way again. :-) Regards, [link:www.dreamfleet2000.com|http://www.dreamfleet2000.com/gfx/images/Forum_Banners/LOU.gif] Can you pilot a plane, instead of programming an FMC to do it for you?[/font color= blue][/font size=1] Regards, Lou Betti http://www.dreamfleet2000.com/gfx/images/forum_banners/DF_BANNER_FORUM_LOU.jpg Link to comment Share on other sites More sharing options...
RealityXP Posted March 12, 2005 Share Posted March 12, 2005 In addition, there are great tutorials here: Garmin GNS530 Tutorial and Review http://www.avweb.com/news/reviews/182453-1.html Garmin Aux Pages Gems! http://www.avweb.com/news/avionics/188339-1.html Master the Garmin! http://www.flyingmag.com/article.asp?section_id=13&article_id=45&page_number=1&preview= Jean-Luc Link to comment Share on other sites More sharing options...
Murray_CYHZ Posted March 17, 2005 Share Posted March 17, 2005 This is for Jean-Luc... Hi! I took your advice and went to the Garmin GNS530 Tutorial and Review at http://www.avweb.com/news/reviews/182453-1.html I have tried the flight a couple of times and am having some problems completing the first leg. After "activating" the vectored approach to 24R at KLAX, the plane does a 180 right turn and heads off into no mans land. To get things to work, I have to disengage the AP after heading 070 degrees (downwind for 24R), then turn right to 150 and then 210. At this point I engage VLOC on the 530 (the tutorial says the GPS will change to VLOC automatically - it does not for me). Anyway, could someone let me know how I am supposed to fly this portion of the tutorial to get the results described. I am obviously doing something wrong, or I am not understanding the directions. Thanks! Murray Link to comment Share on other sites More sharing options...
Murray_CYHZ Posted March 18, 2005 Share Posted March 18, 2005 EDIT: I flew it again and now realize that it is a "vectored" approach. Doh! Just in case someone else is having problems with this, once you are on the 068 degree track, you have to switch to HDG mode (on the AP) and dial in a 070 degree track as per ATC's instruction. You then go 150 and 210 when directed. You can then switch to APR mode (on the AP) and when the 530/430 switches from GPS to VLOC, the AP will capture the ILS and later the GS. Later! Link to comment Share on other sites More sharing options...
dudess5033 Posted April 22, 2005 Share Posted April 22, 2005 Went to the site but the the manuals are in PDF are you saying to run it in the background with the pdf screen minimized? Link to comment Share on other sites More sharing options...
alastairmonk Posted April 22, 2005 Share Posted April 22, 2005 Nearly right - just don't run the PDF manual full-screen but as a smaller window. Or, better still, print it out ! Given the format its possible to print it two pages to a page, and, printing double sided it will only need around 50 pages of paper ! I've done this with both the GNS530 and GNS430 manuals, and very handy they are when printed and bound. Alastair [sIGPIC][/sIGPIC] AOPA #04634067 Link to comment Share on other sites More sharing options...
MattNW Posted May 24, 2005 Share Posted May 24, 2005 >Hello all, > >For those new to using what is essentially a "real" Garmin 430 >that is in the A36, take the advice of someone who owns a real >Garmin 430 that is in a real plane. Hmm, I really must try to curb those impulse online purchases. j/k :D Definately want to print them out if at all possible. I have a bunch of report binders ($.80 each if you get them at a discount store) and have a booklet for all my airplanes with checklists and any documentation needed in flight. Link to comment Share on other sites More sharing options...
jboweruk Posted August 2, 2005 Share Posted August 2, 2005 I can get as far as punching in the flightplan, and even add waypoints that don't exist. But so much still to learn this looks a powerful unit. John Link to comment Share on other sites More sharing options...
G7USL Posted August 26, 2007 Share Posted August 26, 2007 Lou, your 'url' isn't finding it? Link to comment Share on other sites More sharing options...
jdk2 Posted August 26, 2007 Share Posted August 26, 2007 http://www8.garmin.com/support/userManual.jsp?market=1&subcategory=8&product=010-00139-11 Garmin frequently changes pages in updating their website. Regards, Jim Karn [link:vatsim.net|http://vatsim.net/3_bf128.gif] Jim Karn [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Hatter50 Posted October 25, 2007 Share Posted October 25, 2007 Have an issue with the Reality XP Garmen GNS430. Same issue with Archer, A36 and B58. I have installed the R-XP software, including the 430 trainer. The issue is a difference in operation between the trainer and the one in the Archer (and other DF aircraft). With the trainer, I can "use" the twin knobs in lower right hand corner with full function. What is missing on the Archer is the ability to PUSH in the center knob to select flight plans. This knob is functional in the trainer, just not in the aircraft. With the current setup I am unable to use the 430 in the Archer or any of the other DF aircraft with it installed. Obviously I have done something wrong or I have some corrupt software. Regards Steve Link to comment Share on other sites More sharing options...
G7USL Posted October 25, 2007 Share Posted October 25, 2007 Glad to read that someone else is having problems too? Link to comment Share on other sites More sharing options...
Hatter50 Posted October 25, 2007 Share Posted October 25, 2007 I should have posted here also. I found the "Fix". Actually it is just a misdirected "hotspot". The hot spot for "pushing" the small center knob is to the left almost all the way to the "Prog" button. Full fuctionality now. Regards Steve Link to comment Share on other sites More sharing options...
jrgplcs Posted December 6, 2007 Share Posted December 6, 2007 Reading this thread I have seen references to a 430 trainer. Where do you get it? I actually own a 530, is there any 530 trainer that somebody knows of? Thanks Link to comment Share on other sites More sharing options...
DreamFleet1 Posted December 7, 2007 Author Share Posted December 7, 2007 Here you go! :) https://buy.garmin.com/shop/store/downloadsUpdates.jsp?product=010-00182-11&cID=194&pID=119 Regards, Lou Betti http://www.dreamfleet2000.com/gfx/images/forum_banners/DF_BANNER_FORUM_LOU.jpg Link to comment Share on other sites More sharing options...
alastairmonk Posted December 7, 2007 Share Posted December 7, 2007 The link Lou posted is indeed for the GNS530 Trainer, but is later than the version generally held to be the last one to be compatible with the RealityXP gauges, having a single database rather than two (International and Americas) from the Sept. 2005 version. Links to the earlier ones can be found here: http://www.simforums.com/forums/forum_posts.asp?TID=13589 Obviously, if you want the Trainer to learn how to operate the real GNS530, the later one will be fine ! Alastair [sIGPIC][/sIGPIC] AOPA #04634067 Link to comment Share on other sites More sharing options...
Jax_Chief Posted January 16, 2008 Share Posted January 16, 2008 Another tool to utilize, a bit more expensive but well worth it, go to your local airport and check into taking an intro flight in a Garmin 430 / 530 a/c. can run up to 200 bucks for an hour or 2 but its well worth it. Nothing replaces getting a chance to play with the real thing.... Best regards JR Link to comment Share on other sites More sharing options...
stankar Posted March 4, 2008 Share Posted March 4, 2008 Hi Well I've taken the plunge and started getting into the beast. Have downloaded all the manuals and started fiddling around with the knobs. My problem is actually getting started. Going through the manual, or even the help files, I just end up fiddling with knobs and getting nowhere. Lets take an example. Say I want to position myself at Vancouver International, CYVR on the runway and fly a simple hop to Seattle SEA. I set CYVR as my starting location from the File menu, and then, looking at Map view I try and zoom in to see the airport, but it just zooms in to emptiness. Surely I should see the airport layout, as a start? I then find screens which flash Runway dat fields, obviously waiting for me to enter something, but don't know how to enter them. I then enter Seattle as a Direct-to waypoint, but don't seem to be able to actually see the flight plan. I have tried selecting Approach and Arrival under procedures, but don't seem to get anywhere. Then I get the message "FPL waypoint is locked". How do I actually start the flight in the trainer? There's no button that says "fly" or anything like that. I've looked at the tutorial references but, at the moment they seem to be a little beyond my reach. I think that all I'm lacking is a pointer to just get me started on a simple flight like this and I'll be on my way. I've never used GPS before, and have always use FSNav, but, well one has to move on, no? Stan Link to comment Share on other sites More sharing options...
DreamFleet1 Posted March 4, 2008 Author Share Posted March 4, 2008 Hi Stan, I learned the 430 by using the trainer standalone (it has its own simulator mode) along with referring to the manual. I spent several hours with it and then with use in the real plane that was it. You are going to have to spend several hours with it easily to learn all the functions and to be able navigate around its many functions with some ease. Not sure what you are talking about with the file menu and map view, for if you want to go KSEA to CYVR you just use a Direct to using the Direct button and enter CYVR and hit enter a couple of times. For more complex routes you would enter a flight plan, all explained in the Garmin manual. :) Regards, Lou Betti http://www.dreamfleet2000.com/gfx/images/forum_banners/DF_BANNER_FORUM_LOU.jpg Link to comment Share on other sites More sharing options...
alastairmonk Posted March 4, 2008 Share Posted March 4, 2008 Hi Stan, Lou is quite right about "playing" with the Trainer being the best way to learn. However a few "functionality pointers". 1. To enter an ID Code (airport, VOR, waypoint etc.) you need a flashing cursor, which is activated by depressing the small right-hand knob. In the sim this is normally done by depressing your mouse scroll wheel when the cursor is over the small knob 2. To select the 1st, 2nd, 3rd etc. characters of the code, use the large RH knob 3. To select the letter or number for each of the 1st, 2nd, 3rd etc. characters, use the small RH knob 4. When the correct code has been fully entered, enter it with the ENT button 5. For a Direct To waypoint the flightplan is automatically activated when you use the ENT button (one of the prompts is "Activate?") 6. For multi-step flightplans you may have to use the MENU button and select the Activate Leg ? option. Edit: As for flying the route in the Trainer, there should be some controls in the Trainer window below the GNS itself (see image.) Just dial up an appropriate speed and altitude (entirely academic in the Trainer) and you can see how the GNS behaves. By default the "autozoom" option should be enabled, and as you approach a waypoint the scale should reduce a number of times until the waypoint is reached, when the scale will zoom out again to encompass the next waypoint. Alastair [sIGPIC][/sIGPIC] AOPA #04634067 Link to comment Share on other sites More sharing options...
stankar Posted March 7, 2008 Share Posted March 7, 2008 Thanks guys. We're getting there... we're getting there....we're getting there. Gotta fight to the top! Oh was I spoilt by FSNav! Stan Link to comment Share on other sites More sharing options...
alastairmonk Posted March 8, 2008 Share Posted March 8, 2008 Hi Stan, Good Man ! Of course, when you get "hooked" on the Garmins you'll then enter the territory of: "now, which of my other planes can I fit it/them to ?" Alastair [sIGPIC][/sIGPIC] AOPA #04634067 Link to comment Share on other sites More sharing options...
stankar Posted March 10, 2008 Share Posted March 10, 2008 Hi Alastair One questions. If I'm flying VFR, as through the hills and valleys and rivers of BC, the Garmin is not really much help, except just to track your current location. I find that FSNAV is really much more practical, because you can see the whole route in one shot and zoom in to any selected part, whereas the Garmin only allows you to see where you happen to be at that moment. Any comment on this? Stan Link to comment Share on other sites More sharing options...
Recommended Posts