Eurostar27 Posted January 15, 2021 Share Posted January 15, 2021 I have posted this problem on other Flightsim forums. I have been into FS2020, nearly 3 weeks but I am still unable to find the solution to NO ATC sound? I have checked ALL the audio settings on FS and Win10. PC speakers are selected on Win10, and all the audio settings in FS are 100% volume. I get all other sounds, like aircraft noise, music, et. I have tried the volume knobs on the aircraft radio, et. However, when I am playing the sim in VR Oculus Rift CV1 the ATC sound through the Rift headphones are crisp and clear. I don't like playing in VR, because the visual clarity and sharpness is not very good, and the headset is uncomfortable. It seems there is no solution, as after 3 weeks a solution would have been found? Intel i7-6700K, Asus Max VIII Hero, Corsair 3200MHz 32GB, Asus GTX 980Ti, 1.46TB SSD's, Corsair H80, Corsair 860w PSU, Corsair Carbide Case, Oculus Rift CV1, Dell 27''4K IPS Monitor, LG OLED 4Khdr 55''TV, Saitek X52 Flight Control. Link to comment Share on other sites More sharing options...
g7rta Posted January 15, 2021 Share Posted January 15, 2021 I have posted this problem on other Flightsim forums. I have been into FS2020, nearly 3 weeks but I am still unable to find the solution to NO ATC sound? I have checked ALL the audio settings on FS and Win10. PC speakers are selected on Win10, and all the audio settings in FS are 100% volume. I get all other sounds, like aircraft noise, music, et. I have tried the volume knobs on the aircraft radio, et. However, when I am playing the sim in VR Oculus Rift CV1 the ATC sound through the Rift headphones are crisp and clear. I don't like playing in VR, because the visual clarity and sharpness is not very good, and the headset is uncomfortable. It seems there is no solution, as after 3 weeks a solution would have been found?[/quote Hi, I’m not sure exactly what you’re asking. Are you saying you’re getting all the sounds (including ATC) when you fly in VR? Presumably the sounds are only coming through the Rift’s speakers? If so then go into the Oculus program, then into settings and “mirror audio†(I can’s give you what it says exactly as I sold my CV1 & my Quest isn’t connected at present) I now use the Reverb G2 which has a better resolution so it’s clearer and it is so much more comfortable. My Quest feels awful now. It hurts my face, whereas the Reverb doesn’t. I do have an annoying audio issue though.. I tend to have two audio outputs. One is a tv and the other goes to a vibrating seatpad. EVERY time I launch VR, I lose the sound. To get the two outputs, I use a program called Voicemeeter (which is excellent) but everytime I pick up the G2 and WMR comes on... the sound goes off. I then have to open Voicemeeter from the system tray & simply click the output and everything comes back on. I don’t even use the headsets audio (although it is good!) because I need the extra output to my seatpad. Maybe, your issue is similar, but then you say everything else is sounding correctly. Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
JohnnyJohnJohn Posted January 15, 2021 Share Posted January 15, 2021 You need to select your vr headset audio in the audio selection settings on your computer. Thermaltake Ryzen Gen 9 3900x 12 cores, 4.6 ghz 32 gig of Ram, Liquid Cooled Everything. Link to comment Share on other sites More sharing options...
Eurostar27 Posted January 16, 2021 Author Share Posted January 16, 2021 Exactly what I am saying is. ALL the audio is working fine when wearing my Oculus Rift VR headset with headphones. However, I don't like playing in VR, because of the fuzzy graphics in VR (although smooth framerate), and more importantly the discomfort of the headset. So I much prefer playing FS in normal monitor mode. The powered speakers are connected to the speaker output on the motherboard. Never have any problems with any audio on the PC. I start FS2020 and the Asobo intro music is clear as is all the FS music. I start a flight, inside the cockpit and the aircraft engine and other sounds are clear. But the talking sounds from ATC are very quiet, just a whisper. You cant hear what the ATC is saying. What I have not tried yet, is to connect the LG TV to the HDMI (after disconnecting the Rift) output of the GPU, and hear if ALL the sounds are coming through the TV speakers. Normally the TV is connected to the second Display Port on the GPU and the Oculus Rift is connected to the HDMI. Display Ports transmits video, but no sound. HDMI transmits video and sound. The Dell monitor (connected to DP1) does not have built in speakers, so I have to use the 'speaker out' connection with the speakers on each side of the monitor. It is a pity my GPU only has one HDMI out port. Intel i7-6700K, Asus Max VIII Hero, Corsair 3200MHz 32GB, Asus GTX 980Ti, 1.46TB SSD's, Corsair H80, Corsair 860w PSU, Corsair Carbide Case, Oculus Rift CV1, Dell 27''4K IPS Monitor, LG OLED 4Khdr 55''TV, Saitek X52 Flight Control. Link to comment Share on other sites More sharing options...
Leadraft Posted January 16, 2021 Share Posted January 16, 2021 Make sure your PC speakers are set to stereo. (assuming you have stereo speakers) 1. Go to Windows 10 settings > System > Sound (Make sure PC speaker is selected as output device) 2. Select Sound Control Panel 3. Select PC speakers 4. Click on configure button. Mike Windows 10 Home 64bit / Intel i7-8700, 6 Core, 3.2 GHz / 32GB RAM DDR 4 / GTX 1080 OC / SSD(2) / 27" 165 Hz 1440p Monitor / Internet 805 Mbps down, 24 Mbps up Link to comment Share on other sites More sharing options...
g7rta Posted January 16, 2021 Share Posted January 16, 2021 (edited) Exactly what I am saying is. ALL the audio is working fine when wearing my Oculus Rift VR headset with headphones. However, I don't like playing in VR, because of the fuzzy graphics in VR (although smooth framerate), and more importantly the discomfort of the headset. So I much prefer playing FS in normal monitor mode. The powered speakers are connected to the speaker output on the motherboard. Never have any problems with any audio on the PC. I start FS2020 and the Asobo intro music is clear as is all the FS music. I start a flight, inside the cockpit and the aircraft engine and other sounds are clear. But the talking sounds from ATC are very quiet, just a whisper. You cant hear what the ATC is saying. What I have not tried yet, is to connect the LG TV to the HDMI (after disconnecting the Rift) output of the GPU, and hear if ALL the sounds are coming through the TV speakers. Normally the TV is connected to the second Display Port on the GPU and the Oculus Rift is connected to the HDMI. Display Ports transmits video, but no sound. HDMI transmits video and sound. The Dell monitor (connected to DP1) does not have built in speakers, so I have to use the 'speaker out' connection with the speakers on each side of the monitor. It is a pity my GPU only has one HDMI out port. Hi, this is quite puzzling is t it? The fact that you’re hearing all the other sounds correctly but the ATC is quiet is very odd. I presume you’ve tried reducing the volume for engine sounds etc, leaving ATC on 100%? I have recently turned down the ATC voices on mine as they are too loud on 100% My Three TV’s are all connected via display port and the audio will work on any of them (I use the centre one for obvious reasons) The tvs have HDMI sockets, but I have HDMI-Display Port cables. What are the voices like in the lessons? Presumably they are quiet, like ATC? EDIT: you might want to check this out... go into settings then sound... and check what “Communications Selections†is set to. “Default†plays all audio through default audio device. “Headphone simulation†applies a simulation of headphone acoustics that filters external sound environments “COMMUNICATION OUTPUT†: radio communications play through default communication device, while other sounds play through default audio device. Also things like text-to-speech settings might be worth checking. I presume you know there’s a setting under the Assistance menu/User Experience which will let you turn ATC voices on/off? Regards Steve Edited January 16, 2021 by g7rta Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
Leadraft Posted January 16, 2021 Share Posted January 16, 2021 I had this exact problem. ATC sound was fine with headset, but very low thru speakers. Changing speakers from surround sound to stereo in the sound control panel fixed the issue. I would check that first before proceeding further. Mike Windows 10 Home 64bit / Intel i7-8700, 6 Core, 3.2 GHz / 32GB RAM DDR 4 / GTX 1080 OC / SSD(2) / 27" 165 Hz 1440p Monitor / Internet 805 Mbps down, 24 Mbps up Link to comment Share on other sites More sharing options...
Eurostar27 Posted January 17, 2021 Author Share Posted January 17, 2021 As all audio including the ATC were loud and clear with the Rift Headphones, and the Rift is connected to the HDMI. I disconnected the Rift and used the only HDMI port to my LG TV hoping ALL sound would come through the TV speakers. Same problem as before, again the ATC is a whisper but all other sounds clear. The ATC audio MUST be coming through the HDMI, as it does with the Rift headphones, so why not the TV speakers? This is impossible and extremely puzzling! This has to be some kind jinx! So this is happening of both audio outputs, the speaker output on the motherboard and the audio output via the HDMI. How can I present this problem direct to Asobo, rather than go through all the different forums? Intel i7-6700K, Asus Max VIII Hero, Corsair 3200MHz 32GB, Asus GTX 980Ti, 1.46TB SSD's, Corsair H80, Corsair 860w PSU, Corsair Carbide Case, Oculus Rift CV1, Dell 27''4K IPS Monitor, LG OLED 4Khdr 55''TV, Saitek X52 Flight Control. Link to comment Share on other sites More sharing options...
g7rta Posted January 17, 2021 Share Posted January 17, 2021 Not a problem. Sorry it didn’t help. Have you tried what Mike (Leadraft) has suggested? Sounds like that may be the answer. Make sure you’re speakers are set to stereo, rather than surround sound. Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
KiloWatt Posted January 17, 2021 Share Posted January 17, 2021 I had this exact problem. ATC sound was fine with headset, but very low thru speakers. Changing speakers from surround sound to stereo in the sound control panel fixed the issue. I would check that first before proceeding further. I've had the same problem and used same solution to solve the problem. Ryzen 5 3600X, 16 GB 3733 MTs RAM, Radeon RX5700 OC, 2560 x 1080 Ultrawide Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now