Almost perfect...

From the Library:

 

fsx_dc-10_panel_project.zip

 

I installed in the SGA1030.zip and it works find, BUT!!!

 

 

Green Square:

 

When the mouse hovers over I get the +/- but to no avail clicking on the mouse. I exchanged it with the default B747 but just to end up with same response/results.

 

Red Squares:

 

The Courser dial changes the display on top but not the yellow arrow in the HSI. They might be independent from one another since this panel (great panel mind you) is like junkyard pieces of many developers put together.

 

//--------------------------------------------------------

[Window00]

file=MAIN_DAY_GE.bmp

file_1024=MAIN_DAY_GE.bmp

file_1024_night=MAIN_NIGHT_GE.bmp

size_mm=1024,768

window_size_ratio=1.000

position=7

visible=1

ident=MAIN_PANEL

window_size= 1.000, 1.000

window_pos= 0.000, 0.000

zorder=0

 

gauge00=rp727_2!n1_2, 722,434,58,60

gauge01=rp727_2!n1_3, 793,434,58,60

gauge02=rp727_2!rmi, 98,616,79,80

gauge03=rp727_2!rev_1, 652,399,55,20

gauge04=rp727_2!rev_2, 722,400,55,20

gauge05=rp727_2!rev_3, 795,399,55,20

gauge06=rp727_2!n1_1, 653,433,58,60

gauge07=rp727_2!eng_fail, 219,323,43,25

gauge08=rp727_2!n2_1, 653,572,58,60

gauge09=rp727_2!n2_2, 722,572,58,60

gauge10=rp727_2!n2_3, 793,573,58,60

gauge11=rp727_2!gpws, 60,331,30,27

gauge12=n_number_plaque!n_number_plaque, 22,597,56,17

gauge13=732KM!ARM TOGA, 894,444,19,19

gauge14=757_ANUNN!Annun_Autopilot_HDG, 218, 394 ,35,15

gauge15=757_ANUNN!Annun_Autopilot_NAV, 252,394,35,15

gauge16=757_ANUNN!Annun_NAV_GPS, 285,394,36,15

gauge17=757_ANUNN!Annun_Autopilot_ILS, 420,423,45,21

gauge18=757_ANUNN!Annun_Autopilot_AS, 141,435,47,14

gauge19=757_ANUNN!Annun_Autopilot_ALT, 91,435,47,14

gauge20=757_ANUNN!Annun_Autopilot_Autothrottle, 91,421,47,14

gauge21=757_ANUNN!Annun_Autopilot_Master, 141,421,47,14

gauge22=Boeing747-400!Master Warning Light, 264,318,35,35

gauge23=Lear_45!Right Gear Light, 963,468,27,27

gauge24=Lear_45!Nose Gear Light, 976,439,27,27

gauge25=Lear_45!Right Gear Light, 990,468,27,27

gauge26=737!Autobrake, 9,646,70,53

//gauge26=Boeing747-400!Autobrakes Switch, 9,646,70,53

gauge27=../civa/INS!Config, 0,0,36,36,DC-10

gauge28=../civa/INS!NavModeDual, 696,726,45,42

gauge29=../civa/INS!UpdateFlags, 852,741,25,25

gauge30=../civa/INS!MsuPanelIcon, 588,411,19,19,40

gauge31=../civa/INS!CduPanelIcon, 568,411,19,19,41

gauge32=JELAIR!IVSI_digital_TCAS, 347,552,92,93

gauge33=JELAIR!IVSI_digital_TCAS_TCASonOff, 430,630,23,23

gauge34=DC9!Brake_Press, 389,655,51,58

gauge35=DC9!Brake_Press, 447,655,51,58

gauge36=CONCORDE_2!OMI, 356,652,23,66

gauge37=JELAIR!JELAIR-GaugeLights, 476,315,24,26

gauge38=Z_L1011KM!GLIDESLOPE WARNING, 134,327,41,21

gauge39=727KM!StrobeLights, 487,27,26,43

gauge40=727KM!NavLights, 518,27,26,43

gauge41=727KM!BeaconLights, 639,27,26,43

gauge42=727KM!PitotHeat, 707,27,26,43

gauge43=DC9!Landing_Lights, 549,26,31,34

gauge44=DC9!Taxi_Lights, 589,26,31,34

gauge45=AB320KM!FUEL CROSS FEED, 767,21,33,30

gauge46=AB320KM!Battery, 417,15,33,30

gauge47=L1011!StartJet_Prot_1, 887,17,21,49

gauge48=L1011!StartJet_Prot_2, 925,17,21,49

gauge49=L1011!StartJet_Prot_3, 962,17,21,49

gauge50=JELAIR!DigitalDualDME_light, 93,565,93,47

gauge51=CONCORDE_2!Radio-Altimeter, 439,454,94,95

gauge52=JELAIR!AltitudeAlert_light, 93,327,41,24

gauge53=rp727_2!ff_1, 652,641,58,60

gauge54=rp727_2!ff_2, 720,641,60,60

gauge55=rp727_2!ff_3, 791,641,58,60

gauge56=se.744!Annunciator_HYD_Press1, 388,290,19,19

gauge57=se.744!Annunciator_HYD_Press2, 414,309,19,19

gauge58=se.744!Annunciator_HYD_Press3, 437,334,19,19

gauge59=DC9!Below_10000_Round, 188,325,22,22

gauge60=SimIcons1024!GPS Icon, 84,393,19,19

gauge61=SimIcons1024!Overhead Icon, 141,393,19,19

gauge62=SimIcons1024!ECU Icon, 122,393,19,19

gauge63=rp727_2!egt_1, 651,502,62,61

gauge64=rp727_2!egt_2, 719,502,62,61

gauge65=rp727_2!egt_3, 789,502,62,61

gauge66=SimIcons1024!ATC Icon, 27,393,19,19

gauge67=SimIcons1024!Avionics Icon, 103,393,19,19

gauge68=SimIcons1024!Map Icon, 46,393,19,19

gauge69=CNCRD!Attitude-indicator, 195,421,151,150

gauge70=CNCRD!Horizontal-situation-indicator, 194,570,152,158

gauge71=SimIcons1024!Kneeboard Icon, 65,393,19,19

gauge72=DC9!Surfaces, 864,611,80,60

gauge73=hja_jet!jet_flaps_harr, 884,508,43,86

gauge74=FP_Dav1!M850_Gr, 0,468,87,89

gauge75=AB320KM!DeIce WING, 669,27,33,30

gauge76=Z_L1011KM!STBY_ATT_2, 541,434,90,90

gauge77=Z_L1011KM!ALTIMETER_STBY, 551,534,72,74

gauge78=Z_L1011KM!STBY_AIRSPEED, 549,624,73,72

gauge79=CONCORDE_2!Altimeter, 348,454,90,95

gauge80=737!Airspeed, 89,456,104,111

gauge81=Z_L1011KM!FUEL_TOTAL, 445,559,83,83

gauge82=cpt.icons!540_T, 741,723,106,44

gauge83=cpt.icons!IFR_T, 360,721,143,19

gauge84=757_ANUNN!Annun_Stall, 464,423,45,21

gauge85=757_ANUNN!Annun_Spoiler, 377,423,44,21

gauge86=KENWIGAIR!PS737MCP, 504,288,520,101

gauge87=cpt.icons!530_T, 0,719,107,19

gauge88=CALLOUT_SOUND!dsd_xml_sound3, 0,0,20,20,Sound\CALLOUT\Sound.ini

gauge89=CALLOUT_BigJets!CALLOUT2500, 0,0,20,20

gauge90=CALLOUT_BigJets!CALLOUT1000, 0,0,20,20

gauge91=CALLOUT_BigJets!CALLOUT500, 0,0,20,20

gauge92=CALLOUT_BigJets!CALLOUT100, 0,0,20,20

gauge93=CALLOUT_BigJets!CALLOUT50, 0,0,20,20

gauge94=CALLOUT_BigJets!CALLOUT40, 0,0,20,20

gauge95=CALLOUT_BigJets!CALLOUT30, 0,0,20,20

gauge96=CALLOUT_BigJets!CALLOUT20, 0,0,20,20

gauge97=CALLOUT_BigJets!CALLOUT10, 0,0,20,20

gauge98=CALLOUT_BigJets!CALLOUTAPPMIN, 0,0,20,20

gauge99=CALLOUT_BigJets!CALLOUTMIN, 0,0,20,20

gauge100=AN22_ANNUN!TAT_GAUGE, 911,422,28,11

gauge101=c5a!gear_lever, 964,512,25,117

gauge102=IL96!Annun_ENG1_STARTER, 827,5,36,15

gauge103=IL96!Annun_ENG2_STARTER, 827,26,36,15

gauge104=IL96!Annun_ENG3_STARTER, 827,46,36,15

gauge105=KingAir!Magnetic-Compass, 741,71,82,85

gauge106=757_ANUNN!Annun_Overspeed, 18,557,48,15

gauge107=JELAIR!AutopilotDisengagedWarningLight, 363,369,31,32

 

 

//--------------------------------------------------------

 

I can't find the dial, btw.

 

I flew the DC-10-30 with this panel and it worked fine except for the two little glitches I stated missing.

 

Any help?

 

Cheers,

Green square solved: missing "auto_brakes = 4" in the a/c.cfg.

 

Red square still pending.

 

Cheers,

for the red, check if it's really a gauge and not just an image.

make backup of aircraft.cfg file.

then in the aircraft.cfg delete all gauges from [window01]

if gauge it will be gone.

if static image not.

 

Oops--simpler option

look at the bitmap for the panel and see if the gauge is simply drawn on.

Or does the hdg bug move the arrow on the HSI, because then it's a gauge of course.

 

in that case knock them out one at a time to find it.

I think it's gauge70

 

And, judging by the image the hdg-bug works with the gauge, so it is a gauge. (both set to 000)

Or does the hdg bug move the arrow on the HSI, because then it's a gauge of course.

 

Yes, it does move it and yes it is a gauge in a file named CNCRD.gau.

 

Starting to look like game over unless there is something else that can turn the yellow arrow.

 

Cheers,

You're looking in the wrong direction. The course set knob is find. It's the cncrd.gau that has an issue.

(i think) not tested. But i've used the course set knob before and I'm sure that's fine. It also sets the course in the window in the AP. So check out cncrd.gau instead.

(i think) not tested. But i've used the course set knob before and I'm sure that's fine. It also sets the course in the window in the AP. So check out cncrd.gau instead.

 

That is never a way with gauges, meaning de-compiling.

 

waiting still for a fix,

 

Cheers,

Ah, yes, a .gau file.

In that case substitute the gauge with another one. Same position, different gauge.

The hsi from the default Beech would do. One slight issue with that option is is has a vor2. (will work, but this panel has a separate instr for vor, to the left of the hsi. So that will become a bit pointless.)

That will no guaranty the dial at MCP will control the courser in the new HSI though. Doing for the sake doing something is not the objective.

 

Cheers,

I installed that knob in other panels, and there it moved the HSI just fine.

 

Actually I'm surprised that cncrd (concorde) gauge even shows up. I thought the concorde gauges had some problems in fsx. but I'm a bit foggy on that. It obviously shows.

Sorry, I have to recall that statement.

Because I can't be sure this is the same course knob. It is named differently in the panel.cfg (though it looks very much the same, and could still be the same one renamed)

 

But another, more definite indicator.

You have the course window in your panel. If that changes with the knob, then the Beech HSI course will change with it as well.

To simplify the whole red square problem will be just to be able to move the Yellow Arrow in the HSI by any means. So far, nada.

 

Cheers,