ofernandes99

On the official forum they say is because the sim was unable to reach the servers.

And the site is legal

http:// https://forums.flightsimulator.com/t/warning-a-running-process-may-be-interfering/498533/6

Open the sim today and this image appears

Hello

I fly a lot on Portugal and try ils on Lisbon LPPT runway 3, but also on other airports.

If I use the 172 G1000 and Dreamliner the ILS work straight to the middle of the runway.

If I use de A320 the ILS the planes is always miss aligned with the runway, the plane is landing on the grass parallel to the runway.

Why only the A320?

Any one can confirm this?

I apologize for the error in the initial post: I wanted to say LPAZ-LPPD everything is fine!

O fly all time for this airport without a problem.

I have the same graphic.

First clean your roll cache and you have to tweak your config of your graphic card.

Another thing is the drivers of the ssd.

Then make clean install nvidia drivers.

Hello

Wen I start the flight simulator in safe mode everything run well. No stuttering and fps constant.

Wen I start normal mode even without any addon on community folder a lot of stuttering and fps drops.

The only addon are the world updates, garmin and the orbix hospital plane.

Any idea how to solve.

hello all

someone can help do understand this behavior.

wen i am flying i see instantaneous drop of fps. On the same second the fps drops and come up.

i use ultra setting on 3840x1600 and i have 30 fps where i flight.

i put the print screen with msi afterburnmer that is visible the drops

Thanks for the reply.

For the flight gear I use a trustmaster t1600m, rudder pedals and tc quadrant airbus edition.

After your answer maybe go to VR.

Hp reverb g2

My pc is 10700k 32g 3000mhz msi 2070 super oc ventus

Monitor 27” 4K lg ul550-w

On all ultra with render 90 I have 30fps

Hello all

Someone can help me.

I can buy this monitor for flight but I don’t known if it superseded my graphic card.

What is the recommendation monitor for my card?

Or I buy the monitor or a 3070ti

Yes, all of us. It won't be fixed until the World Update on 7th September. For now, try climbing an extra 400ft and see if that shuts ATC up - it works for me.

Thank you

Gone try

Best regards

Hello all

ATC is always asking me to climb even wen I’m at the desire altitude.

Check the altimeter, press b to be sure it’s ok but ATC says always expedite your climb level at FL230.

I level the plane at 23000.

Someone else with the same issue?

I disagree with the need for water cooling, but it does look like the PC is running hot, so suggest looking at better cooling, starting with the PSU and going up from there, one step at a time.

That’s depend. I live in a place where sometimes I have 35c.

I never OC my pc but need good cooling features

Enviado do meu iPad usando o Tapatalk

Hello

Sane cpu, water cooled, temps at 45c maximum.

You can have maybe poor contact cpu- cooler, poor thermal paste.

For me, change cooler for water cooling and use always top thermal paste.

I had a similar problem but it was constant.

How a solved. It was a software from msi that suppose to improve internet speed.

Wen I connect the pc to the router of ISP and tested all speeds are fine.

Wen I connect to my UDM from UniFi the speed wasn’t fine. Both downloads an upload at half speed.

Then I see the process and fine the software that was killing me.

I update the drivers of my network card and removed this software.

Try to find any software that you don’t need or know on windows and remove it.

Hello

I have a IPD of 72mm.

Everybody says that HP REVERB G2 is the best vr headset for the simulator.

Any one with this kind of IPD. try it?

Another question is the scuba dive mask effect.

I try other headset and os always like i am seeing trough a mask. Do you see this on HP G2?

Hello all.

Before I buy a VR HEADSET I decided to try to borrow the PS VR froM my son.

After testing some software I achieved to make it work.

If others want to try:

NOLO HOME software.

Installed steam without any game.

After that installed STEAMVR and ivr drivers.

Start NOLO and after steamvr starts, launch the simulator. After selecting all the fly and at the runway, tap control+tab.

Now the question for all the person’s that have headsets VR.

On PSVR I alway see like I am looking on a lens ( black all a round corners ). On others VR is more immersive?

I know that the resolution on PSVR are not the best one.

Which HEADSETS you recommend?

Best regards.

Thanks

Reset done all ok

Hello all

Before the update, wen I use the arrow key in cockpit he slide to left, right, up or down.

Now does nothing.

Someone with the same issue?

Best regards

I think it was helpful if you can put the settings because I also have sensitivity problems with my controller and I’d love to learn how to put the flights fine.

Best regards

Enviado do meu iPad usando o Tapatalk

Thank for the reply

Wen I am at 5000 ft Cessna 172 g1000.

If I am on bush trip all work ok. On free flight won’t respond.

Enviado do meu iPad usando o Tapatalk

Hello

Something wrong with mixture.

If I flight bush trip the mixture control works. If I move the mixture I listen the motor rpm increase and cut off wen I am at 20% or less.

If I configure a free flight only the cut off below 20% works.

Someone have the same issue ?

Thank you for the answer.

I succeeded all the other before this one.

Just this one I kind find the spot.

I already try all this leg again and never finish with check.

Hello all

I start the bush trip Balkans

I have land on the airport of kopalda dlmltra and now the sim don’t advance to the other stage.

Anyone with the same problem

There’s a turn around

[/https://www.avsim.com/forums/topic/584827-config-file-for-joystick-deadzone/ URL]