WEISSE

hello

I have a new joystick Thrustmaster T16000 + throttle. I would like to assign buttons for autopilot engage/disengage and I am searching the corresponding line of command in the XPlane 11 joystick settings.

I found for the B737 : laminar / B738 /autopilot / command A and AP disconnect.

but for all other planes I do not find the correct command line, I searched all the lines of AP commands in navigation & radios / autopilot ,but I do not find something like AP Engage and disconnect.

can somebody help ?

thanks

Is there an NDB instrument in the Laminar Boeing 737 ?

I cannot find it .

Thanks

I have a problem of loss of power with the King Air C90 ; I am climbing to 5000 ft all engine parameters in green, RPM at 2000 and suddenly I loose all power, Torque, turbine, fuel flow at 0, RPM at 2000, with the warning in red L FUEL FLOW. I have more than enough fuel.

I tried to re do the flight, same event. In XP parameters all failures are desactivated.

What is going wrong thanks for help.

Hello

When I select heading on the autopilot of the Boing 747, I do not see the heading bug on the EHSI and the compass rose remains blocked on 000 degree ?

can somebody help?

thanks

Hello

I am using FS X SE and XPlane 11.41

I am looking for flight planner ; in the past I was using FSNavigator for FS9, it has been replaced by FSTramp

FSNavigator was a wonderful tool for flight planning (automatic or manual) and had the capability to fly the flight plan automatically like a FMS/GPS, VNAV LNAV, speed...autopilot until the landing if you wish.

I believe fSTramp has the same capability, but it is expensive (recurrent fee per year).

I have noticed that some other flight planner exist but I am unsure of their capabilities: FS Commander, LittleNavMap, Plan-G.

If you use one or several of these flight planners, could you indicate me:

-which one is performing this functions:fly the flight plan automatically like a FMS/GPS, VNAV LNAV, speed...autopilot until the landing if you wish.

-which one is compatible with XPlane 11.41

thanks for your advises.

helo

I am new to XPlane, coming from FS9 and FSX.

I am learning the use of GPS 430 and 530.

When I select a frequency for VOR 1 or 2, I cannot find the distance to these VOR when I fly and navigate. There is no DME in this aircraft ? Can I find this distance in the GPS? Is the DME integrated in the GPS ? How to proceed?

thanks for help.

Also more generally where can I find good tutorials to navigate in XPlane? The PDF files included for these GPS and FMS are not enough for me, I would need real examples to learn.

thanks for help.

Thanks to both of you.

Wim despite using your method à lot of assignments do not work.

Chuck I am affraid of changing keyboard directly in Windows.

After several hours of use I am very disapointed by FSX SE. Not a real progress vs FS9.

Poor graphics, unrealistic flight dynamics, I have a lot of difficulties to calibrate my old joystick Logitech Force 3D Pro.

I have been using FS9 during more than a decade in the past and have been à private pilot during more than 30 years.

I would like to have more informations about Prepar3D and XPlane. Is there some articles which compare the pro and cons of these 3 simulators ? I searched but have not found.

Thanks.

hello

can somebody help me starting to FS X -SE versus FS9 I was using in the past. I have tried to search everywhere in this internet site or in the FSX-SE Learning center and help, but still have lots of problems.

I have problems with keyboard assignments, some of them described in the help of Learning center .

for example, view zoom in press= is ok, but zoom out press - does not work.

in the settings controll the assignment is different : chase distance increase CTRL+=, decrease CTRL+ (nothing!), none of these 2 assignments work. So I am lost! Is there specific assignments for Azerty keyboard?

in the keyboard shortcuts assignement is there a difference between qwerty and azerty keyboards? As a french I have an Azerty?

I have noticed that many other keyboards assignement do not work !

release parking brake should be : . does not work.

Thanks for help

thanks

yes I can see that in the camera.cfg file; curiously pan and spot views have the same rates defined but there is a real difference in pan view in both types of cockpit; but it is not a big deal, I can live with this.

I am sorry to disturb you again but you have a lot of knowledge to help me starting to FS X -SE versus FS9 I was using in the past. I have tried to search everywhere in this internet site or in the FSX-SE Learning center and help, but still have lots of problems.

I have problems with keyboard assignments, some of them described in the help of Learning center .

for example, view zoom in press= is ok, but zoom out press - does not work.

in the settings controll the assignment is different : chase distance increase CTRL+=, decrease CTRL+ (nothing!), none of these 2 assignments work. So I am lost! Is there specific assignments for Azerty keyboard?

in the keyboard shortcuts assignement is there a difference between qwerty and azerty keyboards? As a french I have an Azerty?

I have noticed that many other keyboards assignement do not work !

release parking brake should be : . does not work.

are you living in Belgium as indicated hereabove? I live in France.

thanks for your help. Best regards

hello

I did the change and it works OK. the only problem is the pan speed of rotation is much slower in 2D than in 3D . Is there a way to define the pan speed of rotation 2D the same than 3D?

thanks

thanks again for your detailed answer

I will try this

thank you again for your detailed answer

yes file location is the same in FSX SE.

this is what I have currently in the original file:

ShowPanel = Yes

SnapPbhAdjust = Ordinal : I should change to Swivel

SnapPbhReturn = True : should I change to No ?

PanPbhAdjust = Ordinal : Ishould change to Swivel

PanPbhReturn = True : should I change to No ?

What is Snap vs Pan ?

what is this Return function in both cases?

thank you for your patience.

hello

with my Logitech FORCE 3D PRO pan view with coolie hat is working ok in 3D cockpit but does not work in 2D cockpit.

I am new user of FSX SE. Years ago I was using FS9 and it was necessary to add someting in the FS9.cfg file to get the pan view.

Is it the same in FSX? What to add?

thanks for help.

hello

with the coolie hat of my Logitech Force 3D Pro I can pan view in 3D cockpit but it does not work in 2D cockpit. In FS9 there was something to add in the FS9.cfg file. Is it also the case in FSX SE?

thanks

hello

I am coming back to FS after several years of interruption. Sveral years ago I was a fan of FS2004

I have downloaded FSX STEAM but have a lot of questions

Years ago there was a FS2004 general FAQ on this site to answer a lot of installation / fine tuning ..

is there a general FAQ for FSX on this site? I cannot locate it.

thanks for help.