nightowl56

Anyone know what happened to "stuff4fs.com"  It seems that the website may be gone.

Looking to download the fruit stand Saab 340 base model but can't seem to find it.  I registered on their website and have been waiting 3 weeks for an admin to approve me so that I can download. Any suggestions where I can get this file?

WANTED.  Location on US or Canada West Coast.

                 P3Dv4 compatible aircraft (A MUST)

                 Route assignments preferred.

                 Not required to fly on vatsim (or others)

                 Transfer hours from current airline a plus but not required.

I currently have 1159 hours (so yes I do fly)  Current rank of Air Transport Senior Captain.   If your airline matches these needs and your interested in having me on your roster please PM.

               

I can't help with painting but I currently fly (Privet Aircraft in that area) and wouldn't mind flying for a new airline.  Could you send me a link for sign up.  Regards. 

Looking for someone to paint a few aircraft for P3D v4.  (free painting would be good but I'd pay via paypal).  if intrested feel free to contact me at nightowl56@comcast.net. Please refer to P3Dv4 painting if contacting

Looking for an Allegiant B757- that is compatible with P3D v4. (I've checked here, Simviation, and Avsim with no luck. Info appreciated.

Tks anaismith I forgot all about simviation.

Tks.

looking for the B757-200 in delta livery. Freeware preferred but will buy if I have to.

Could someone tell me where in the FSUIPC file I would check for this? Fix Control Acceleration bug. It seems that this is the issue causing the auto pilot setting malfunctions (not allowing increase or decrease in small increments. example: speed setting can only set in 10's (same issue with other settings). Note: When I remove the FSUIPC program all is well. Problem is there are other programs I use that need the FSUIPC. so help would be welcomed.

started at 11.5. Changed this by -1. until I reached 2.5 which was the first setting to make a difference.

So as of now it has cut the idle. Thanks for the idea.

Thank you for the reply. Yes I know. These are the setting that came with the aircraft (freeware downloads) I have no idea what the standard setting would be.

I have a few prop / turbo prop aircraft that idle way to high. (They start rolling when idling). I know that I need to change something in the config file but could someone tell me which value I need to change? This is what currently is there for the engines and props.

 

[GeneralEngineData]

engine_type = 5

Engine.0 = 3.484, -13.573, 3.570

Engine.1 = 3.484, 13.573, 3.570

fuel_flow_scalar = 0.650

min_throttle_limit = -0.250000

max_contrail_temperature = -39.0

 

[propeller]

thrust_scalar = 1.0

propeller_type = 0

propeller_diameter = 11.981

propeller_blades = 4

propeller_moi = 320.000

beta_max = 45.000

beta_min = 11.500

min_gov_rpm = 27974.000

prop_tc = 0.004

gear_reduction_ratio = 24.700

fixed_pitch_beta = 0.000

low_speed_theory_limit = 80.000

prop_sync_available = 1

prop_deice_available = 1

prop_feathering_available = 1

prop_auto_feathering_available = 1

min_rpm_for_feather = 350.000

beta_feather = 79.3

power_absorbed_cf = 0.900

defeathering_accumulators_available = 0

prop_reverse_available = 1

minimum_on_ground_beta = 0.000

minimum_reverse_beta = -20.000

 

[TurbineEngineData]

fuel_flow_gain = 0.008

inlet_area = 1.200

rated_N2_rpm = 28950.000

static_thrust = 450.000

afterburner_available = 0

 

[turboprop_engine]

power_scalar = 1.000

maximum_torque = 11240.000

max_rpm_mechanical_efficiency_scalar = 1.000

idle_rpm_mechanical_efficiency_scalar = 1.000

max_rpm_friction_scalar = 1.000

idle_rpm_friction_scalar = 1.000

I want a 2d panel for airbus that will work in P3D v4. Twin engine jet, airbus would be nice, but I can't find one suggestions?

I recently downloaded a scenery file for KLAS. Most of it is good, but where a new terminal building was added the building itself and all additional parking spots vehicles etc. are above ground level. (you can actually taxi an aircraft under them). so how do I fix them so that they are at ground level?

Is anyone running an eastwind VA?

I'm getting the sound error when trying to use Rob Barendrget's pushback guage. "You have enabled the wrong XMLSound gauge version ! (32bit vs. 64bit)." So where do I change this?

PENS FOREVER!!! Mr Daniels. Might I impose on you for a favor? I need the default MD8x aircraft file for FS9. IF you would be willing to send it to me please do so at nightowl56@comcast.net.

 

Thank you.

RT. Johnstown, PA

ai-aardvark.com

Is this airline still in service?

Does anyone know if Eastern Airlines will be restarting?

I need to add parking codes for a VA to the listing so that I might assign parking but I can not find the file where that need to be done.

Would someone please direct me to the correct file.

Portland based or HUB'ed VA.???

Where should the SDK file be placed in my FS X game files.

Cool I applied and am waiting activation. Thanks for the reply.