waltsingpilot Posted August 27, 2022 Share Posted August 27, 2022 Hello there, When I bought MS2020 everything worked fine. Now all my graphics are very very poor and I am getting a bandwidth error. This is strange as your specs say 20 Mbps is OK. I am getting 25 but cannot really play MS2020, please help me I am upset. Kind regards Walter Houston wjhouston20032003@yahoo.com.au Link to comment Share on other sites More sharing options...
g7rta Posted August 27, 2022 Share Posted August 27, 2022 This might help.. https://flightsimulator.zendesk.com/hc/en-us/articles/4414599136146--Your-bandwidth-is-too-low-for-data-streaming-you-have-been-switched-to-offline-mode- Regards Steve Intel I9-13900K - Gigabyte Z790 Aorus Elite AX - 64Gb DDR5 5600Mhz - Asus RTX4090 ROG STRIX 24GB 3x 43” Panasonic 4k TVs - Corsair RMx 1200W PSU - 2 x 2TB M.2, 2 x 4TB SATA III and 1 x 4TB M.2 SSDs. Pico 4 VR Headset - Honeycomb Alpha Yoke - Honeycomb Bravo Throttle Unit Thrustmaster TPR Rudder Pedals - Saitek Throttles Link to comment Share on other sites More sharing options...
cianpars Posted August 27, 2022 Share Posted August 27, 2022 I'm pretty sure MS servers are not giving us the bandwidth we need from their end. I've followed all the steps in the above link and speedtest is showing me I have a connection running at 45 mbs but London photogrammetry was loading very, very slowly earlier. Ryzen 5800X3D, Nvidia 3080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2020 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor) Link to comment Share on other sites More sharing options...
davidc2 Posted August 27, 2022 Share Posted August 27, 2022 I'm pretty sure MS servers are not giving us the bandwidth we need from their end. I've followed all the steps in the above link and speedtest is showing me I have a connection running at 45 mbs but London photogrammetry was loading very, very slowly earlier. I suspect your right. I would get the same message and I have a 600/MPS connection, even tested it and it was right up there. Yet, I was getting low bandwith error Windows 10 Pro, 32 gigs DDR4 RAM, Nvidia GForce RTX 3070, Intel I7 10700 running at 3.8, with Noctua NH-L9x65, Premium Low-Profile CPU Cooler-HP Reverb G2 for Virtual Reality Link to comment Share on other sites More sharing options...
daspinall Posted August 27, 2022 Share Posted August 27, 2022 (edited) is it the servers or that dreaded Xbox app? I suspect the Xbox..... always disconnecting sending messages you are off-line.. And why does one need Xbox apps for a PC? I've killed all the ones I can.. Edited August 27, 2022 by daspinall ASRock X570 TAICHI Mother Board AMD Ryzen 9 3900X 3.79 GHz *Overclocked* Corsair 240mm H100i ELITE CAPELLIX RGB Intel/AMD CPU Liquid Cooler Corsair DOMINATOR PLATINUM RGB 64GB 3600MHz *Overclocked* MSI NVIDIA GeForce RTX 3090 Ti 24GB SUPRIM X Ampere. 1000W PSU. Samsung 870 EVO 2TB SSD. HP Reverb G2 + Oculus Quest 2 Samsung Odyssey G9 C49G95TSSR - QLED monitor - curved - 49" - 5120 x 1440 Dual Quad HD @ 240 Hz Link to comment Share on other sites More sharing options...
Miahflyer Posted August 27, 2022 Share Posted August 27, 2022 Hello there, When I bought MS2020 everything worked fine. Now all my graphics are very very poor and I am getting a bandwidth error. This is strange as your specs say 20 Mbps is OK. I am getting 25 but cannot really play MS2020, please help me I am upset. Kind regards Walter Houston wjhouston20032003@yahoo.com.au Try changing the DNS address of the Server for example from 8,8,8,8 to 9.9,9,9,9. This can be found on the property page of the server Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now