About This File FS2004/FSX Interjet Airbus A321. This is an Airbus A321-231 with sharklets; the first A321 of interjet. Repaint by Isabel Rodriguez, model by Project Airbus.
cmr1990 10 Posted September 26, 2016 Share Sadly I have to recommend people don't download this plane, 4 separate attempts to get her off the ground have resulted in not even achieving V1 all four times, I was able to get V1 on the longest RW in the US (groom lake) When I was able to get her off the ground at groom late she went into an in-savable stall. Project Airbus mods usually do well and preform well, but someone somewhere has obviously messed up the flight dynamics by the time this specific one got uploaded here. I say if you must have this skin just get the Project Airbus A321 elsewhere and just put the skin from this one on it. Link to comment Share on other sites More sharing options...
csosaf 10 Posted October 4, 2016 Share HiI download this aircraft and flight in MMMX an airport at 7200 ft high and fly with out problems, Its true that the engines need a minor modification to increase power, this can be done changing some parameters on the aircraft.CFG config file my final configuration is this and work great!!!!: [generalenginedata]engine_type=1fuel_flow_scalar=1 Engine.0=13.500000,-18.95,-5.125Engine.1=13.500000,18.95,-5.125min_throttle_limit=-0.25max_contrail_temperature = -30 [autopilot]autopilot_available=1flight_director_available=1 default_vertical_speed=1000autothrottle_available=1 //use_no_default_pitch= 1//use_no_default_bank= 1pitch_takeoff_ga=18 autothrottle_arming_required= 1autothrottle_takeoff_ga= 1autothrottle_max_rpm= 107default_pitch_mode=0default_bank_mode=0max_pitch= 10.00max_pitch_acceleration= 2.00max_pitch_velocity_lo_alt= 4.00max_pitch_velocity_hi_alt= 1.50 max_pitch_velocity_lo_alt_breakpoint= 20000max_pitch_velocity_hi_alt_breakpoint= 24000max_bank= 25.00max_bank_acceleration= 2.0max_bank_velocity= 3.0max_throttle_rate= 0.30nav_proportional_control= 12.00nav_integrator_control= 0.05nav_derivative_control= 0.01nav_integrator_boundary= 0.5nav_derivative_boundary= 0.35gs_proportional_control= 15.0 gs_integrator_control= 0.30gs_derivative_control= 0.00gs_integrator_boundary= 0.7gs_derivative_boundary= 0.00yaw_damper_gain= 1.00 [turbineenginedata]fuel_flow_gain=0.002inlet_area=25.000rated_N2_rpm=29920static_thrust=32000 //CFM56-5B3 corrected value. Actual T/O 32000 MCP 29090.afterburner_available=0reverser_available=1bypass_ratio=5.40 Link to comment Share on other sites More sharing options...
dan6gonzalez 10 Posted November 5, 2016 Share Try to update the aircraft weights too Link to comment Share on other sites More sharing options...
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now