kevchris Posted March 19, 2016 Share Posted March 19, 2016 Hello All - As a long time flight simmer, I have recently moved to P3D along with a new Jetline computer to run it - the results have been great! I have a question that I hope someone can answer, as I have seen conflicting pieces of information out there. Is any of the commercially available AI traffic generators compatible with P3D, V3? I used to utilize Ultimate Traffic 2 with FSX, and miss the accurate traffic and liveries in P3D. Some of the comments seem to suggest that none of the products are yet compatible. I would appreciate if you can provide any information, and hopefully direct me to the product should one currently exist. Best regards, Kevin Link to comment Share on other sites More sharing options...
vgbaron Posted March 20, 2016 Share Posted March 20, 2016 MyTraffic 6 is available for P3D. I know some are using UT2 - don't know if it's a hack or they have a new installer. Vic P3D Rig I7 7700K @ 5.0ghz Asus Maximus X270 16G G.Skill 3600 15-15-15-18 2T EVGARTX2080ti Corsair 1000W PSU 1TB Samsung SSD for P3D - 2 - 256G OCZ Vector SSD - HAF X - Corsiar H100i V2 Liquid Cooler W10 64 Pro. Link to comment Share on other sites More sharing options...
Ken Thompson Posted March 22, 2016 Share Posted March 22, 2016 A very good question. I await a reply also. Thinking of making the switch to P3D. Intel 4th Gen i7 4790 (4.4GHz Overclock) Quad Core Corsair H80i Liquid Cooler, 2GB Nvidia GeForce GTX 770, 250 GB SSD, 2 TB 7200 Link to comment Share on other sites More sharing options...
alexzar14 Posted March 22, 2016 Share Posted March 22, 2016 WOAI is the best, used it in FSX and use it in P3D. Absolutely not because it is free, I never regret the money I spend on payware addons, it is the money spent on enjoyment. But, WOAI features beautiful aircraft models that look like a complete model, Aerosoft traffic and UT2 models are ugly. Ironically it is UT2 and ASTraffic that have a greater impact on fps performance. With WOAI I install the airlines I want for a "nice touch" and don't overload the sim with a gigaton of stuff that comes with Aerosoft traffic that makes it barely possible to run the sim. Link to comment Share on other sites More sharing options...
evm Posted March 24, 2016 Share Posted March 24, 2016 UT2 is based on SimConnect and it still works fine in P3D V3. Installing it is a bit of a hack though, but nothing serious. Btw. the models in UT2 are in a lot of cases the same ones as in WOAI (Aardvark, TFS, DJC, ...). And you can always direct UT2 to use the WOAI models. I still very much prefer the dynamic traffic handling via SimConnect over the rather static approach with BGLs. Link to comment Share on other sites More sharing options...
gderreck Posted April 4, 2016 Share Posted April 4, 2016 +1 My experience with UT2 has been favourable in P3D v3.x. Better performance than BGL based addons. Is easily customized using PowerPack and database functions in UT2. Uses models from many of the same designers as WorldOfAI, Alpha India, etc. On the minus side: no military aircraft, large number of Daedalus paints instead of correct repaints for many airlines, no 787. Also, have to trick system onto thinking you are running FSX; both for installation and operation. Military can be added and Daedalus can be replaced with correct paints; but that requires time and patience. Creating a dummy FSX setup takes about 1 hour and is not overly complex. AI 787 available from a couple of designers. I am a late convert to UT2, having used MyTraffic for several years. I really wish someone like Burkhard or Orbx could take over UT2 and bring it up to date. Just my 5 cents worth (we no longer have pennies in Canada). Link to comment Share on other sites More sharing options...
rayjennings Posted August 9, 2016 Share Posted August 9, 2016 I too have been running UT2 very well - after a bit of hacking - in P3D V3.1 but there have been some changes in the way that V3.2 has been configured which means that UT2 cannot be installed in the same way. Up to now, I've not figured out how to do it and there are no obvious hacks to get round the problem. Maybe someone out there knows how to install UT2 into P3D V3.2. +1 My experience with UT2 has been favourable in P3D v3.x. Better performance than BGL based addons. Is easily customized using PowerPack and database functions in UT2. Uses models from many of the same designers as WorldOfAI, Alpha India, etc. On the minus side: no military aircraft, large number of Daedalus paints instead of correct repaints for many airlines, no 787. Also, have to trick system onto thinking you are running FSX; both for installation and operation. Military can be added and Daedalus can be replaced with correct paints; but that requires time and patience. Creating a dummy FSX setup takes about 1 hour and is not overly complex. AI 787 available from a couple of designers. I am a late convert to UT2, having used MyTraffic for several years. I really wish someone like Burkhard or Orbx could take over UT2 and bring it up to date. Just my 5 cents worth (we no longer have pennies in Canada). Link to comment Share on other sites More sharing options...
noahweber Posted August 10, 2016 Share Posted August 10, 2016 This may not be super helpful since I've never used UT2 but I can vouch for MyTraffic 6 as well. Works great in 3.3 and never fails to deliver a good local spice to any airport as far as the types and liveries you see. http://s6.postimg.org/a9i0d43tt/Capture.jpg Link to comment Share on other sites More sharing options...
Bobsk8 Posted August 10, 2016 Share Posted August 10, 2016 You want something that you can install and it just works, and is easy on frames, My Traffic 6. Link to comment Share on other sites More sharing options...
truenorth71 Posted August 11, 2016 Share Posted August 11, 2016 MyTraffic Pro works very well in P3D v3.2 and I suspect it'll work just as well in v3.3.5. After going through the "hack", you'll get your fair share of AI traffic so keep the percentage low. Even at 30%, you'll get near-full airport stands. It can be a little heavy on the system resources, but that all depends on where you are flying from/to. - James Link to comment Share on other sites More sharing options...
lestercat Posted August 27, 2016 Share Posted August 27, 2016 You want something that you can install and it just works, and is easy on frames, My Traffic 6. +1 i7 8700k no oc, 16gb DDR4-3000, GTX 1080i, P3D on M.2 Nvme [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
lestercat Posted August 27, 2016 Share Posted August 27, 2016 You want something that you can install and it just works, and is easy on frames, My Traffic 6. +1 i7 8700k no oc, 16gb DDR4-3000, GTX 1080i, P3D on M.2 Nvme [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.