Jump to content

Help on CFG-file


kenneth2300

Recommended Posts

Hi team,

 

I am new to FSX, but been using FS9 for years.

 

I downloaded a complete aircraft from the library on this site, but it does not show up in FSX, and this is something I experience is almost 50% of my downloads.

 

Can someone please check the below CFG-file?

 

I have also included the folder names - see attachment "Folder".

 

THanx guys - Kenneth

 

 

[fltsim.0]

title=Airbus A330-300RR No Satcom

sim=A330-300-RR-Trent-772B

model=rrNOsat

panel=

sound=

texture=

checklists=

 

atc_airline=

atc_id=F-WWKJ

atc_flight_number=

atc_heavy=1

 

ui_manufacturer=Airbus

ui_type=A330-300RR/Nosat

ui_variation=Airbus House Colors

visual_damage=1

description=Project Opensky \nAirbus 330-300 v2\nVersion 2004.7.1\n\nFS2002 Only\n\nEngine Type: RR Trent\n\nModel Designers\n Shervin Ahooraei\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nMaster Texture Designer\n Gary Hayes\n Ben Hewitt\n\nTechnical Resource\n Simon Ng\n Nick Peterson\n\nTest Pilots\n Project Opensky Members\n\nFor proper operation: See A330 manual at: \n http://www.projectopensky.com

 

[fltsim.1]

title=Airbus A330-300RR Satcom

sim=A330-300-RR-Trent-772B

model=rrSAT

panel=

sound=

texture=

checklists=

 

atc_airline=

atc_id=F-WWKJ

atc_flight_number=

atc_heavy=1

 

ui_manufacturer=Airbus

ui_type=A330-300RR/Satcom

ui_variation=Airbus House Colors

visual_damage=1

description=Project Opensky \nAirbus 330-300 v2\nVersion 2004.7.1\n\nFS2002 Only\n\nEngine Type: RR Trent\n\nModel Designers\n Shervin Ahooraei\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nMaster Texture Designer\n Gary Hayes\n Ben Hewitt\n\nTechnical Resource\n Simon Ng\n Nick Peterson\n\nTest Pilots\n Project Opensky Members\n\nFor proper operation: See A330 manual at: \n http://www.projectopensky.com

 

[fltsim.2]

title=Airbus A330-300 Air Canada No Satcom

sim=A330-300-RR-Trent-772B

model=rrNOsat

panel=

sound=

texture=ACA

checklists=

 

atc_airline=Air Canada

atc_id=

atc_flight_number=

atc_heavy=1

 

ui_manufacturer=Airbus

ui_type=A330-300RR/Nosat

ui_variation=Air Canada

visual_damage=1

description=Project Opensky \nAirbus 330-200\nVersion 2002.5.0\n\nFS2002 Only\n\nEngine Type: Trent-772B\n\nModel Designers\n Shervin Ahooraei\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nPaint Designer\n C. Vincent Cho\n\ Ben Hewitt\n\nTechnical Resource\n Simon Ng\n Nick Peterson\n\nTest Pilots\n Project Opensky Members\n\nFor proper operation: See A330 manual at: \n http://www.project-opensky.com

 

[fltsim.3]

title=Airbus A330-300 Cathay Pacific No Satcom

sim=A330-300-RR-Trent-772B

model=rrNOsat

panel=

sound=

texture=CPA

checklists=

 

atc_airline=Cathay

atc_id=B-HLH

atc_flight_number=509

atc_heavy=1

 

ui_manufacturer=Airbus

ui_type=A330-300RR/Nosat

ui_variation=Cathay Pacific

visual_damage=1

description=Project Opensky \nAirbus 330-200\nVersion 2002.5.0\n\nFS2002 Only\n\nEngine Type: Trent-772B\n\nModel Designers\n Shervin Ahooraei\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nPaint Designer\n C. Vincent Cho\n\ Ben Hewitt\n\nTechnical Resource\n Simon Ng\n Nick Peterson\n\nTest Pilots\n Project Opensky Members\n\nFor proper operation: See A330 manual at: \n http://www.project-opensky.com

 

[fltsim.4]

title=Airbus A330-300RR Scandinavian Satcom

sim=A330-300-RR-Trent-772B

model=rrSAT

panel=

sound=

texture=SAS

checklists=

 

atc_airline=Scandinavian

atc_id=LN-RKH

atc_flight_number=

atc_heavy=1

 

ui_manufacturer=Airbus

ui_type=A330-300RR/Satcom

ui_variation=Scandinavian

visual_damage=1

description=Scandinavian Airlines System Airbus A330-343X LN-RKH 'Emund Viking'. Project Opensky \nAirbus 330-300 v2\nVersion 2004.7.1\n\nFS2002 Only\n\nEngine Type: RR Trent\n\nModel Designers\n Shervin Ahooraei\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nMaster Texture Designer\n Gary Hayes\n Ben Hewitt\n\nTechnical Resource\n Simon Ng\n Nick Peterson\n\nTest Pilots\n Project Opensky Members\n\nFor proper operation: See A330 manual at: \n http://www.projectopensky.com

 

[CameraDefinition.0]

Title = "Right Side Window"

Guid = {54F54B8A-3EC2-2D4E-8D10-B8F9D0F16ACC}

Description = View of the right wing from the passenger cabin

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 0.4

ShowWeather = Yes

InitialXyz = 3.2, 2.0, -5

InitialPbh = 5, 0, 100

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect=TRUE

ClipMode=Minimum

 

[CameraDefinition.1]

Title = "Left Side Window"

Guid = {0ae3f864-da10-4e5a-977c-b9bba47d6f7a}

Description = View of the left wing from the passenger cabin

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = .4

ShowWeather = Yes

InitialXyz = -3.2, 1.8, -5

InitialPbh = 5, 0, 260

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect=TRUE

ClipMode=Minimum

 

[CameraDefinition.2]

Title = "Landing Gear"

Guid = {96873AAD-621B-4C45-8A58-DEF7B7FCB051}

Description = Right rear pax view first class

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = .50

ShowWeather = Yes

InitialXyz = 2.1, 2.1, 5.4

InitialPbh = 15, 0, 129

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect=TRUE

ClipMode=Minimum

 

[CameraDefinition.3]

Title = "Tail"

Guid = {5c1df273-034b-4e7f-953a-9d5e26f1646c}

Description = Right Rear Cockpit View

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = .70

ShowWeather = Yes

InitialXyz = 1.7, 2.1, 15.2

InitialPbh = 5, 0, 140

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect=TRUE

ClipMode=Minimum

 

[CameraDefinition.4]

Title = "Right Wing"

Guid = {C690EAFD-223A-42d0-99E0-681ADF93BB59}

Description = Left rear cockpit view

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = .70

ShowWeather = Yes

InitialXyz = -1.7, 2.1, 15.2

InitialPbh = 5, 0, 220

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect = FALSE

ClipMode=Minimum

 

[CameraDefinition.5]

Title = "Left Wing"

Guid = {f25dfa2e-fd2e-4b89-81e2-0575cbcb60de}

Description = Left rear pax view first class

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 0.50

ShowWeather = Yes

InitialXyz = -2.1, 2.1, 5.4

InitialPbh = 15, 0, 229

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect = No

ClipMode=Minimum

 

[CameraDefinition.001]

Title = "Right Seat"

Guid = {8ff6c134-098d-409f-baec-caba3f683f98}

Origin = Virtual Cockpit

MomentumEffect = YES

SnapPbhAdjust = Swivel

SnapPbhReturn = False

PanPbhAdjust = Swivel

PanPbhReturn = False

Track = None

ShowAxis = YES

AllowZoom = TRUE

InitialZoom = .7

SmoothZoomTime = 2.0

ZoomPanScalar = 1.0

ShowWeather = Yes

XyzAdjust = TRUE

ShowLensFlare=FALSE

Category = Cockpit

PitchPanRate=20

HeadingPanRate=60

InitialXyz=1.35, 0.0, 0.0

InitialPbh=2, 0, 0

 

[CameraDefinition.002]

Title = "Center Console"

Guid = {195EAB58-9E4A-2E2A-A34C-A8D9D948F078}

Origin = Virtual Cockpit

MomentumEffect = No

SnapPbhAdjust = None

SnapPbhReturn = False

PanPbhAdjust = None

PanPbhReturn = False

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 0.9

SmoothZoomTime = 2.0

ZoomPanScalar = 1.0

ShowWeather = Yes

XyzAdjust = TRUE

ShowLensFlare=FALSE

Category = Cockpit

PitchPanRate=20

HeadingPanRate=60

InitialXyz=0.65, 0.50, -0.2

InitialPbh=70, 0, 0

 

[CameraDefinition.003]

Title = "Overhead Panel"

Guid = {4ca337db-ae88-4c5f-96ea-ddebbd2a86fe}

Origin = Virtual Cockpit

MomentumEffect = No

SnapPbhAdjust = None

SnapPbhReturn = False

PanPbhAdjust = None

PanPbhReturn = False

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 0.8

SmoothZoomTime = 2.0

ZoomPanScalar = 1.0

ShowWeather = Yes

XyzAdjust = TRUE

ShowLensFlare=FALSE

Category = Cockpit

PitchPanRate=20

HeadingPanRate=60

InitialXyz=0.7, -0.58, -0.31

InitialPbh=-58.0, 0, 0

 

 

 

[WEIGHT_AND_BALANCE]

reference_datum_position= 0.000, 0.000, 0.000

empty_weight_CG_position= 0.000, 0.000, 0.000

 

max_number_of_stations=50

station_load.0=0.000000,0.000000,0.000000,0.000000

 

empty_weight= 354700.000

 

empty_weight_roll_MOI= 8955743.000

empty_weight_pitch_MOI= 22600873.000

empty_weight_yaw_MOI= 22751035.000

empty_weight_coupled_MOI= 1000.000

 

max_gross_weight= 515700.000

CG_forward_limit= 0.000

CG_aft_limit= 1.000

 

[flight_tuning]

cruise_lift_scalar =1.000

parasite_drag_scalar =1.500

induced_drag_scalar =1.300

elevator_effectiveness =1.200

aileron_effectiveness =1.500

rudder_effectiveness =2.500

pitch_stability =1.500

roll_stability =1.000

yaw_stability =1.000

elevator_trim_effectiveness =1.000

aileron_trim_effectiveness =1.000

rudder_trim_effectiveness =1.000

 

 

atc_type=AIRBUS AIRCRAFT

atc_model=A330

 

[pitot_static]

vertical_speed_time_constant = 1 //Increasing this value will cause a more instantaneous reaction in the VSI

pitot_heat = 1.0 //Scalar on heat effectiveness, 0 = not available

 

[fuel]

//Center1= 0.000, 0.000, -4.000, 16260.000, 0.000

Center2= -83.676, 0.000, 0.000, 1617.000, 3.000

LeftMain= -7.000, -37.983, 0.000, 11147.000, 3.000

RightMain= -7.000, 37.983, 0.000, 11147.000, 3.000

LeftAux= -13.000, -70.269, 0.000, 974.000, 3.000

RightAux= -13.000, 70.269, 0.000, 974.000, 3.000

 

fuel_type= 2.000 //Fuel type: 1 = Avgas, 2 = JetA

number_of_tank_selectors= 1

electric_pump=0

 

[airplane_geometry]

wing_area= 3892.000

wing_span= 197.833

wing_root_chord= 20.000

wing_dihedral= 6.218

wing_incidence= 0.000

wing_twist= -0.500

oswald_efficiency_factor= 0.600

wing_winglets_flag= 1

wing_sweep= 30.000

wing_pos_apex_lon= 25.000

wing_pos_apex_vert= 0.000

htail_area= 1050.000

htail_span= 69.700

htail_pos_lon= -89.200

htail_pos_vert= 0.000

htail_incidence= 0.000

htail_sweep= 40.000

vtail_area= 690.000

vtail_span= 27.300

vtail_sweep= 35.000

vtail_pos_lon= -83.676

vtail_pos_vert= 5.800

elevator_area= 137.000

aileron_area= 68.000

rudder_area= 232.000

elevator_up_limit= 24.000

elevator_down_limit= 18.000

aileron_up_limit= 25.000

aileron_down_limit= 25.000

rudder_limit= 45.000

elevator_trim_limit= 15.000

spoiler_limit= 35.000

spoilerons_available= 0

aileron_to_spoileron_gain= 3.000

min_ailerons_for_spoilerons= 9.969

min_flaps_for_spoilerons= 0.000

auto_spoiler_available=1

spoiler_extension_time=2.000000

positive_g_limit_flaps_up=4.000000

positive_g_limit_flaps_down=3.000000

negative_g_limit_flaps_up=-3.000000

negative_g_limit_flaps_down=-2.000000

 

 

[GeneralEngineData]

engine_type= 1

Engine.0= 15.166, -30.386, -7.583

Engine.1= 15.166, 30.386, -7.583

fuel_flow_scalar= 0.4370

min_throttle_limit=-0.409912

 

[TurbineEngineData]

bypass_ratio=4.66

fuel_flow_gain= 0.001

inlet_area= 48.150

rated_N2_rpm= 29922.000

static_thrust= 71100.000

afterburner_available= 0

reverser_available= 1

 

[jet_engine]

thrust_scalar =0.800

 

[Reference Speeds]

flaps_up_stall_speed= 132.000

full_flaps_stall_speed= 124.000

cruise_speed= 460.000

max_indicated_speed=330.000000

max_mach=0.870020

 

[keyboard_response]

elevator= 100.000, 200.000

aileron= 100.000, 200.000

rudder= 50.000, 100.000

 

[Views]

eyepoint= 77.9, -1.800, 8.200

 

[autopilot]

autopilot_available=1

flight_director_available=1

default_vertical_speed=1800

autothrottle_available=1

autothrottle_arming_required=1

autothrottle_max_rpm = 90

autothrottle_takeoff_ga=1

pitch_takeoff_ga = 8;

max_pitch=10.0

max_pitch_acceleration=1.0

max_pitch_velocity_lo_alt=2.0

max_pitch_velocity_hi_alt=1.5

max_pitch_velocity_lo_alt_breakpoint=20000.0

max_pitch_velocity_hi_alt_breakpoint=28000.0

max_bank=25.0

max_bank_acceleration=1.8

max_bank_velocity=3.00

max_throttle_rate=0.10

nav_proportional_control=12.00

nav_integrator_control=0.25

nav_derivative_control=0.00

nav_integrator_boundary=2.50

nav_derivative_boundary=0.00

gs_proportional_control=25.0

gs_integrator_control=0.53

gs_derivative_control=0.00

gs_integrator_boundary=0.70

gs_derivative_boundary=0.00

yaw_damper_gain = 1.0

 

[Radios]

// Radio Type = availiable, standby frequency, has glide slope

Audio.1 = 1

Com.1 = 1, 1

Com.2 = 1, 1

Nav.1 = 1, 1, 1

Nav.2 = 1, 1, 0

Adf.1 = 1, 1

Transponder.1 = 1

Marker.1 = 1

 

[direction_indicators]

direction_indicator.0=3,0

 

[contact_points]

 

//0 Class

//1 Longitudinal Position (feet)

//2 Lateral Position (feet)

//3 Vertical Position (feet)

//4 Impact Damage Threshold (Feet Per Minute)

//5 Brake Map (0=None, 1=Left, 2=Right)

//6 Wheel Radius (feet)

//7 Steer Angle (degrees)

//8 Static Compression (feet) (0 if rigid)

//9 Max/Static Compression Ratio

//10 Damping Ratio (0=Undamped, 1=Critically Damped)

//11 Extension Time (seconds)

//12 Retraction Time (seconds)

//13 Sound Type

//14 Airspeed limit for retraction (KIAS)

//15 Airspeed that gear gets damage at (KIAS)

 

point.0= 1.000, 62.433, 0.000, -10.625, 1181.102, 0.000, 1.845, 78.000, 0.500, 0.500, 0.510, 10.000, 10.600, 0.000, 280.000, 300.000

point.1= 1.000, -15.5, -17.750, -13.88, 1574.803, 2.000, 2.45, -8.000, 2.3, 1.5, 0.550, 10.600, 11.800, 2.000, 280.000, 300.000

point.2= 1.000, -15.5, 17.750, -13.88, 1574.803, 1.000, 2.45, -8.000, 2.3, 1.5, 0.550, 10.900, 11.900, 2.000, 280.000, 300.000

point.3= 2.000, -14.167, -95.917, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000

point.4= 2.000, -14.167, 95.917, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000

point.5= 2.000, -120.667, 0.000, 2.500, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000

point.6= 2.000, 88.417, 0.000, -3.750, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000

point.7= 2.000, 14.167, -99.917, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 7.000, 0.000, 0.000

point.8= 2.000, 0.000, 44.750, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8.000, 0.000, 0.000

point.9 = 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 0, 10, 30

point.10 = 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 2, 0, 10, 30

 

 

static_pitch= 0.104

static_cg_height= 11.420

 

//Nose Gear

//point.0= 1.000, 62.433, -2.000, -11.200, 1181.102, 0.000, 4.845, 78.000, 1.000, 2.400, 0.510, 7.000, 9.000, 0.000, 280.000, 300.000

//point.1= 1.000, 62.433, 2.000, -11.200, 1181.102, 0.000, 4.845, 78.000, 1.000, 2.400, 0.510, 7.000, 9.000, 0.000, 280.000, 300.000

//

//Main Gear (Left)

//point.2= 1.000, -11.067, -20.500, -13.200, 1574.803, 1.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 2.000, 280.000, 300.000

//point.3= 1.000, -11.067, -15.000, -13.200, 1574.803, 1.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 2.000, 280.000, 300.000

//point.4= 1.000, -6.667, -20.500, -13.200, 1574.803, 1.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 2.000, 280.000, 300.000

//point.5= 1.000, -6.667, -15.000, -13.200, 1574.803, 1.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 2.000, 280.000, 300.000

 

//Main Gear (Right)

//point.6= 1.000, -11.067, 20.500, -13.200, 1574.803, 2.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 3.000, 280.000, 300.000

//point.7= 1.000, -11.067, 15.000, -13.200, 1574.803, 2.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 3.000, 280.000, 300.000

//point.8= 1.000, -6.667, 20.500, -13.200, 1574.803, 2.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 3.000, 280.000, 300.000

//point.9= 1.000, -6.667, 15.500, -13.200, 1574.803, 2.000, 4.845, -8.000, 1.000, 2.400, 0.550, 10.900, 11.900, 3.000, 280.000, 300.000

//

//Scrape Points

//point.10= 2.000, -14.167, -95.917, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000

//point.11= 2.000, -14.167, 95.917, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000

//point.12= 2.000, -120.667, 0.000, 2.500, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000

//point.13= 2.000, 88.417, 0.000, -3.750, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000

//point.14= 2.000, 14.167, -99.917, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 7.000, 0.000, 0.000

//point.15= 2.000, 0.000, 44.750, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8.000, 0.000, 0.000

//point.16 = 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 0, 10, 30

//point.17 = 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 2, 0, 10, 30

//

//static_pitch= 0.104

//static_cg_height= 12.920

gear_system_type=0

 

[TailHook]

tailhook_length=1 ;(feet)

tailhook_position=-15.0, 0.0, -1.0 ;(feet) longitudinal, lateral, vertical positions from datum

cable_force_adjust=1.0

 

[folding_wings]

wing_fold_system_type=4 ;0=None

fold_rates=0.12,0.11 ;Percent per second

 

[EFFECTS]

wake=fx_wake

water=fx_spray

dirt=fx_tchdrt

concrete=fx_sparks

touchdown=fx_tchdwn, 1

 

 

[exits]

number_of_exits = 2

exit_rate.0 = 0.4 ;Percent per second

exit_rate.1 = 0.4 ;Percent per second

 

[LIGHTS]

Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing

light.1 = 1, 7.800, 0.000, -5.500, fx_beaconb ,

light.2 = 1, 0.200, 0.000, 14.500, fx_beaconh ,

light.3 = 4, 82.500, 0.000, 8.000, fx_vclight ,

light.4 = 2, -40.200, -93.100, 13.380, Opensky_airbus_strobe ,

light.5 = 2, -40.200, 93.100, 13.380, Opensky_airbus_strobe ,

light.6 = 5, 18.000, 27.000, -4.000, Opensky_wing_light,

light.7 = 5, 19.933, 8.827, -4.368, Opensky_wing_light,

light.8 = 5, 18.000, -27.000, -4.000, Opensky_wing_light,

light.9 = 5, 19.933, -8.827, -5.368, Opensky_wing_light,

light.10 = 5, 19.700, 19.000, -6.000, Opensky_nacelle_refl,

light.11 = 5, 19.700, -19.000, -6.000, Opensky_nacelle_refl,

light.12 = 3, -116.000, 0.000, 11.420, Opensky_nav_yellow ,

light.13 = 2, -116.000, 0.100, 11.300, fx_strobeh ,

 

 

[General]

performance=Passengers\n2-class conf: 335 \n1-class conf: 440\n\nCargo\n32\/33 LD3 containers \/ 11 Pallets \n600 cubic Ft (17 cubic m)\nTotal lower hold volume: 5,656 cu ft \n\nDimensions\nSpan 197 ft 10 in\nLength 208 ft 11 in\nHeight 54 ft 11 in \n\nEngines: RR Trent 772B\nTO Thrust Rating: 71,100 lb\n\nMax Fuel Cap.: 24,700 gal\nMaxTOW: 515,700 lb\nZFW: 354,700 lb\n\nMax Range: 4,750 nm\nTypical Cruise Speed \n @ FL350: M.82

atc_type=AIRBUS

atc_model=A330

Category=airplane

 

 

 

[Flaps.0]

type= 1

span-outboard= 0.800

extending-time= 15.000

system_type= 1

damaging-speed= 200.000

blowout-speed= 250.000

lift_scalar= 1.000

drag_scalar= 1.500

pitch_scalar= 3.000

flaps-position.0= 0.000

flaps-position.1= 8.000

flaps-position.2= 14.000

flaps-position.3= 22.000

flaps-position.4= 32.000

 

[Flaps.1]

type= 2

span-outboard= 0.800

extending-time= 12.000

system_type= 1

damaging-speed= 250.000

blowout-speed= 300.000

lift_scalar= 1.000

drag_scalar= 1.500

pitch_scalar= 3.000

flaps-position.0= 0.000

flaps-position.1= 20.000

 

 

[forcefeedback]

gear_bump_nose_magnitude=3000 ; 0 - 10000

gear_bump_nose_direction=18000 ; 0 - 35999 degrees

gear_bump_nose_duration=250000 ; in microseconds

gear_bump_left_magnitude=2700 ; 0 - 10000

gear_bump_left_direction=35500 ; 0 - 35999 degrees

gear_bump_left_duration=250000 ; in microseconds

gear_bump_right_magnitude=2700 ; 0 - 10000

gear_bump_right_direction=00500 ; 0 - 35999 degrees

gear_bump_right_duration=250000 ; in microseconds

ground_bumps_magnitude1=1300 ; 0 - 10000

ground_bumps_angle1=08900 ; 0 - 35999 degrees

ground_bumps_intercept1=3.0

ground_bumps_slope1=0.20

ground_bumps_magnitude2=200 ; 0 - 10000

ground_bumps_angle2=09100 ; 0 - 35999 degrees

ground_bumps_intercept2=1.075

ground_bumps_slope2=0.035

crash_magnitude1=10000 ; 0 - 10000

crash_direction1=01000 ; 0 - 35999 degrees

crash_magnitude2=10000 ; 0 - 10000

crash_direction2=9000 ; 0 - 35999 degrees

crash_period2=75000 ; in microseconds

crash_duration2=2500000 ; in microseconds

 

 

[electrical]

max_battery_voltage = 24.0

generator_alternator_voltage = 30.0

max_generator_alternator_amps = 400.0

 

[gear_warning_system]

gear_warning_available=0

pct_throttle_limit=0.099976

flap_limit_power=25.496622

flap_limit_idle=5.042029

 

[brakes]

toe_brakes_scale=1.000000

parking_brake=1

auto_brakes=4

 

[hydraulic_system]

normal_pressure = 3000.0 //PSI

electric_pumps = 1 //no electric pumps

engine_map = 1,1,0,0 //pumps on Eng1,2

 

[vacuum_system]

max_pressure=5.15 // PSI

vacuum_type=2 //Type: 0=None, 1=Engine pump (default), 2=Pneumatic, 3=Venturi

 

[pneumatic_system]

max_pressure=18.000000

bleed_air_scalar=1.000000

 

[stall_warning]

type=1

stick_shaker=1

 

[airspeed_indicators]

airspeed_indicator.0=1

airspeed_indicator.1=1

 

[attitude_indicators]

//Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro

attitude_indicator.0 = 2

attitude_indicator.1 = 2

 

[altimeters]

altimeter.0=1

altimeter.1=1

 

[turn_indicators]

//Type: 0=None, 1=Electric Gyro, 2= Vacuum Gyro

turn_indicator.0=0,0

 

[deice_system]

structural_deice_type=1 //0 = None, 1 = Heated Leading Edge, 2 = Bleed Air Boots, 3 = Eng Pump Boots

 

[pneumatic_system]

max_pressure=18.000000

bleed_air_scalar=1.000000

Folder.jpg

Link to comment
Share on other sites

description=Project Opensky \nAirbus 330-200\nVersion 2002.5.0\n\nFS2002 Only\n\nEngine Type: Trent-772B\n\nModel Designers\n Shervin Ahooraei\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nPaint Designer\n C. Vincent Cho\n\ Ben Hewitt\n\nTechnical Resource\n Simon Ng\n Nick Peterson\n\nTest Pilots\n Project Opensky Members\n\nFor proper operation: See A330 manual at: \n http://www.project-opensky.com

 

What I have in red seems disturbing!

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

Kenneth & Charlie - I have looked at this several times and what (and only what) finally stood out is the name of the Air File. In Kenneth's attachment he shows :

 

A330-300-RR-Trent-772B.air

 

I have the same download and my aircraft Air File name does not show the .air extension behind it. Try renaming the file without the .air and see what that might do?

 

Worth a try, Good luck! :rolleyes:

 

Rick :cool:

Link to comment
Share on other sites

Don't rename the file.

 

Downwind, your pc does not show the .air extension because you have Windows set to "hide extensions for known file types." (in "Folder Options".).

 

OOPS, "My Bad!" You are correct Il. I've looked at this so many times, I give up! :rolleyes:

 

Rick :cool:

Link to comment
Share on other sites

One big change from FS9 to FSX is the location of aircraft. Mine are in D:\fsx\SimObjects\Airplanes, where in FS9 it would have been D:\fsx\Airplanes. If Mr. Zippy can't help then check out WHERE your downloaded aircraft are installed. This might be why you have trouble with other aircraft, too.

 

If that's not your problem then I, too, am stumped.

 

Larry N.

As Skylab would say:

Remember: Aviation is NOT an exact Science!

Link to comment
Share on other sites

Forgive me if I'm wrong but I always thought any aircraft from an earlier sim you need to delete the panel and sound file then add a panel and sound from a similar aircraft from FSX.

I always do this with ai aircraft is it the same with flyables?

 

Col.

Link to comment
Share on other sites

To be honest I don't know why you are using the Project Opensky Airbus A330 in FSX when there is the Thomas Ruth A330 series which has native FSX models, panel & a good VC. Do a search in the library for toma332b.zip, toma333b-1.zip & toma3mrt.zip.

 

-1 Easy for us to do, but this guy is having problems just making his aircraft show. Let's not make him crazy by having to copy all of those files from the default A321 and make sure they go into the proper places! I think we should all relax and see if he's willing to reply to any/all of our responses.:rolleyes:

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

Yes, Charlie, the OP is so close! Just looking at his copies he attached, we all are missing something here, and I for one am very anxious to see how this all "plays out!" I looked at his copies many times, and I know my eyes are going bad, but did not see anything that would prevent him from enjoying these aircraft!

 

Good luck Kenneth!

 

Rick :cool:

Link to comment
Share on other sites

Yes, Charlie, the OP is so close! Just looking at his copies he attached, we all are missing something here, and I for one am very anxious to see how this all "plays out!" I looked at his copies many times, and I know my eyes are going bad, but did not see anything that would prevent him from enjoying these aircraft!

 

Good luck Kenneth!

 

Rick :cool:

 

Like I said way earlier....ain't nuttin' wrong with the .cfg file he posted. I'll bet money that he doesn't have "Show All Variations" checked on his Aircraft Select Page.

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

Yes, it's got to be something he hasn't shown you yet! And you sent him the page and showed him what to look for! Oh well, I'm just anxious to see what it ends up being!

 

Have a great day Charlie!

 

Rick :cool:

 

You , also! I ain't holding my breath for his return!

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

Downwind,

You say you want to see a response.

But think about what you said in the thread. You made clear that you looked at the aircraft.cfg he sent, and in your infinite wisdom there is nothing wrong.

That's very close to saying "kenneth2300" is making a lot of fuss about nothing.

And that's not really going to make him reply any faster. Probably going to do the oppisite.

||

Saying he's making a fuss about nothing a few more times won't help.

If you really want a response, it's usually best to just wait for one.

People can be busy. With work, or other things.

 

------------------------------------------

Kenneth2300

 

I assume you are using this download:

https://flyawaysimulation.com/downloads/files/1398/fsx-project-opensky-a330-300/

 

That plane shows fine when installed in FSX Acceleration. I checked.

 

But...

When I replace the aircraft.cfg file from the download with your aircraft.cfg file....

It no longer works.

The plane then no longer shows uin the "Select Aircraft list"

 

One ting that is different in your aircraft.cfg file

is that it has a whole bunch of

 

CameraDefinition

sections.

 

[CameraDefinition.0]

 

[CameraDefinition.1]

etc.

 

I don't know if those sections are what is causing the problem. There are probably other differences as well.

 

I didn't look at "how to fix your file". I don't have time to go through your whole file for the exact cause of the problem. The cameradefinition sections are just what I noticed first.

 

I guess the fast and simple simple solution is to download the aircraft again. (link above). And to install that.

Or to at least use the aircraft.cfg file from that download.

That should get the plane to show up.

 

I assume the aircraft.cfg file you posted was something you had edited.

I would start over with the fresh aircraft.cfg file and do you edits again more carefully.

[sIGPIC][/sIGPIC]
Link to comment
Share on other sites

Thanks for the great idea il;) I copied the aircraft.cfg from post #1 and made one tiny edit....and not to the cameras. I found something that looked odd and did not belong, at least where I found it. The aircraft still show up nicely in my Select Aircraft screen!

 

edit.JPG

Edited by mrzippy

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

Downwind,

You say you want to see a response.

But think about what you said in the thread. You made clear that you looked at the aircraft.cfg he sent, and in your infinite wisdom there is nothing wrong.

That's very close to saying "kenneth2300" is making a lot of fuss about nothing.

And that's not really going to make him reply any faster. Probably going to do the oppisite.

||

Saying he's making a fuss about nothing a few more times won't help.

If you really want a response, it's usually best to just wait for one.

People can be busy. With work, or other things.

 

------------------------------------------

Mr il88pp - Speaking of "infinite wisdom," you certainly have your fair share of that. You better go back and read this entire thread. I said I looked at the entire information that the OP has posted and I did not see anything that would prevent his aircraft from showing!

 

Don't address me as one who "wrote the OP off!" Just today, I said to mrzippy that I am anxious to see what the outcome is, as nobody out there seems to see anything wrong with what the OP had submitted. If you scroll back up to post #16, I even wished the OP luck in finding a solution to his problem! I am as baffled as anyone on here as to what is going on with his downloads, but, I in no way "wrote him off" and don't you dare be judgemental on me until you get your facts straight! Last time I looked I did not see a title of "Moderator" under your username. If you got problems with what you believed you had interpretted on ANY of my posts, take it up with one! They are the only Judge and Jury that I recognize on this forum!

Link to comment
Share on other sites

Hi MrZippy,

I don't fully understand. (Probably a language diffrence issue.)

 

Do you mean with his aircraft.cfg file as posted here it shows up fine? Cause it does not on my PC.

 

Or do you mean that his version as posted, after your edits of removing those lines makes the plane show up?

Cause I tried removing just those two lines from his .cfg like you showed and the plane still does not show on my pc after restarting FSX.

 

-In a few hours I will do a side by side comparison of the original.cfg from the download and the aircraft.cfg file he posted. Dinnertime first though.

 

 

Downwind/Rick, relax.

All I did was give some well meant advice that sometimes pressing for an

answer will make people less eager to respond. Simple well meant advice

from one user to another.

Yes, I didn't sugarcoat the message. Didn't think I would have to, and was

also pressed for time. Had my coat on already and the shops were about

to close.

Relax, and have a good evening.

[sIGPIC][/sIGPIC]
Link to comment
Share on other sites

Hi MrZippy,

I don't fully understand. (Probably a language diffrence issue.)

 

Do you mean with his aircraft.cfg file as posted here it shows up fine? Cause it does not on my PC.

 

Or do you mean that his version as posted, after your edits of removing those lines makes the plane show up?

Cause I tried removing just those two lines from his .cfg like you showed and the plane still does not show on my pc after restarting FSX.

 

-In a few hours I will do a side by side comparison of the original.cfg from the download and the aircraft.cfg file he posted. Dinnertime first though.

 

 

Downwind/Rick, relax.

All I did was give some well meant advice that sometimes pressing for an

answer will make people less eager to respond. Simple well meant advice

from one user to another.

Yes, I didn't sugarcoat the message. Didn't think I would have to, and was

also pressed for time. Had my coat on already and the shops were about

to close.

Relax, and have a good evening.

 

After copying OP's original aircraft.cfg from post #1 and editing out those 2 lines, I have the aircraft in the Select screen and they show up fine when selected.

 

Now to be fair, I did not try his .cfg without any edits.

Edited by mrzippy

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

After copying OP's original aircraft.cfg from post #1 and editing out those 2 lines, I have the aircraft in the Select screen and they show up fine when selected.

 

Now to be fair, I did not try his .cfg without any edits.

 

Actually, I just tried his posted cfg (unchanged) and it showed up.:confused:

No idea why it didn't do so earlier.

He's probably found his aircraft and is happily flying I hope.

Btw, I checked the Model files by opening in Notepad. They are not FSX models, so instaling a VC is not an option.

 

-----------

Oh, though the plane shows up with his file, there some big differences in his file and the original one.

The [camerapositions] for one.

also:

 

his [Autopilot] section is missing 4 lines compared that are in the original:

use_no_default_pitch = 1 // 0 = Default to current pitch mode, 1 = No default pitch mode.

use_no_default_bank = 1 // 0 = Default to Wing Leveler mode, 1 = No default bank mode.

default_pitch_mode=0

default_bank_mode=0

 

And he has:

[electrical]

max_battery_voltage = 24.0

generator_alternator_voltage = 30.0

max_generator_alternator_amps = 400.0

 

instead of the original:

[electrical]

// ;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4)

autopilot = 0, 5 , 17.0

flap_motor = 1, 0 , 1.0

gear_motor = 0, 5 , 17.0

avionics_bus = 0, 0 , 1.0

avionics = 1, 5 , 17.0

pitot_heat = 0, 0 , 1.0

additional_system = 0, 0 , 1.0

marker_beacon = 1, 2 , 17.0

gear_warning = 7, 0 , 99.0

gear_motor = 4, 0 , 1.0

fuel_pump = 0, 0 , 1.0

fuel_transfer_pump = 0, 0 , 1.0

starter1 = 0, 20, 17.0

starter2 = 0, 0 , 1.0

light_nav = 0, 0 , 1.0

light_beacon = 0, 0 , 1.0

light_landing = 0, 0 , 1.0

light_taxi = 0, 0 , 1.0

light_strobe = 0, 0 , 1.0

light_panel = 0, 7 , 99.0

light_recognition = 0, 0 , 1.0

light_wing = 0, 0 , 1.0

marker_beacon = 0, 0 , 1.0

standby_vacuum = 0, 0 , 1.0

auto_brakes = 0, 0 , 1.0

hydraulic_pump = 0, 0 , 1.0

propeller_device = 0, 0 , 1.0

 

He has:

[vacuum_system]

max_pressure=5.150000

vacuum_type=2

The original has two more lines then his:

[vacuum_system]

max_pressure=5.150000

vacuum_type=2

electric_backup_pressure=0.000000

engine_map=0,0,0,0

 

The original has no:

[airspeed_indicators]

airspeed_indicator.0=1

airspeed_indicator.1=1

 

And the original only has:

[attitude_indicators]

attitude_indicator.0=1

 

instead of his:

[attitude_indicators]

//Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro

attitude_indicator.0 = 2

attitude_indicator.1 = 2

 

[altimeters]

altimeter.0=1

altimeter.1=1

 

No other significant differences. Just the odd duplicated section in his file. And the original file uses Tabs to keep thing aligned nicely. (in his file spaces.) but tabs or spaces should make no difference.

 

Happy Flights.:D

Edited by il88pp
[sIGPIC][/sIGPIC]
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...