Need copy of Contact points for default FS2004 Boeing 737-400

Anyone out there that might be able to provide me with a copy of the original FS2004 default Boeing 737-400 contact points?

Doing a project and need a comparison copy of these contact points.

Thanks, you can either copy and post to a post or send me a PM.

Thanks, Rick :cool::cool:

//0 Class

//1 Longitudinal Position (feet)

//2 Lateral Position (feet)

//3 Vertical Position (feet)

//4 Impact Damage Threshold (Feet Per Minute)

//5 Brake Map (0=None, 1=Left, 2=Right)

//6 Wheel Radius (feet)

//7 Steer Angle (degrees)

//8 Static Compression (feet) (0 if rigid)

//9 Max/Static Compression Ratio

//10 Damping Ratio (0=Undamped, 1=Critically Damped)

//11 Extension Time (seconds)

//12 Retraction Time (seconds)

//13 Sound Type

//14 Airspeed limit for retraction (KIAS)

//15 Airspeed that gear gets damage at (KIAS)

[contact_points]

point.0=1, 40.00, 0.00, -8.40, 1181.1, 0, 1.442, 55.92, 0.6, 2.5, 0.9, 4.0, 4.0, 0, 220.0, 250.0

point.1=1, -7.75, -8.58, -8.60, 1574.8, 1, 1.442, 0.00, 1.0, 2.5, 0.9, 6.9, 6.9, 2, 220.0, 250.0

point.2=1, -7.75, 8.58, -8.60, 1574.8, 2, 1.442, 0.00, 1.0, 2.5, 0.9, 7.1, 7.1, 3, 220.0, 250.0

point.3=2, -14.17, -47.33, 0.00, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 5, 0.0, 0.0

point.4=2, -14.17, 47.33, 0.00, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 6, 0.0, 0.0

point.5=2, -54.00, 0.00, 2.83, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 9, 0.0, 0.0

point.6=2, 42.67, 0.00, -3.75, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 4, 0.0, 0.0

max_number_of_points = 21

static_pitch=0.04 //degrees, pitch when at rest on the ground (+=Up, -=Dn)

static_cg_height=7.67 //feet, altitude of CG when at rest on the ground

gear_system_type=1 //Hydraulic

Here you go:

//0 Class

//1 Longitudinal Position (feet)

//2 Lateral Position (feet)

//3 Vertical Position (feet)

//4 Impact Damage Threshold (Feet Per Minute)

//5 Brake Map (0=None, 1=Left, 2=Right)

//6 Wheel Radius (feet)

//7 Steer Angle (degrees)

//8 Static Compression (feet) (0 if rigid)

//9 Max/Static Compression Ratio

//10 Damping Ratio (0=Undamped, 1=Critically Damped)

//11 Extension Time (seconds)

//12 Retraction Time (seconds)

//13 Sound Type

//14 Airspeed limit for retraction (KIAS)

//15 Airspeed that gear gets damage at (KIAS)

 

[contact_points]

point.0=1, 40.00, 0.00, -8.40, 1181.1, 0, 1.442, 55.92, 0.6, 2.5, 0.9, 4.0, 4.0, 0, 220.0, 250.0

point.1=1, -7.75, -8.58, -8.60, 1574.8, 1, 1.442, 0.00, 1.0, 2.5, 0.9, 6.9, 6.9, 2, 220.0, 250.0

point.2=1, -7.75, 8.58, -8.60, 1574.8, 2, 1.442, 0.00, 1.0, 2.5, 0.9, 7.1, 7.1, 3, 220.0, 250.0

 

point.3=2, -14.17, -47.33, 0.00, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 5, 0.0, 0.0

point.4=2, -14.17, 47.33, 0.00, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 6, 0.0, 0.0

point.5=2, -54.00, 0.00, 2.83, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 9, 0.0, 0.0

point.6=2, 42.67, 0.00, -3.75, 787.4, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 4, 0.0, 0.0

 

max_number_of_points = 21

 

static_pitch=0.04 //degrees, pitch when at rest on the ground (+=Up, -=Dn)

static_cg_height=7.67 //feet, altitude of CG when at rest on the ground

gear_system_type=1 //Hydraulic

Thanks guys, it is very much appreciated!

Rick :cool::cool: