Results 1 to 8 of 8

Thread: LD-767: Coming out of auto-braking, plane still brakes to complete stop.

  1. #1
    Join Date
    Mar 2005
    Location
    Hanover Park, Illinois, USA.
    Posts
    4,160

    Default LD-767: Coming out of auto-braking, plane still brakes to complete stop.

    Hi,
    Something I am not sure of after recently setting up LD767 on my new system.
    During landing rollout, I usually have the RTO/Braking set to 2. When slowed to 80 knots, I come out of RTO/Braking (disengage back to off), but instead of coasting and letting me take over with manual braking, the plane will slow to a stop fairly quickly. This did not occur for the many years I flew the 767 on my old WIN7 setup.
    I am thinking it is a setting, somewhere, but can't figure out what or where.

    Would any LD-767 user be familiar with what I may look at to correct this?

    Thanks very much!

    Neil
    Last edited by Qballbandit; 01-13-2021 at 03:19 PM.

  2. #2
    Join Date
    Jan 2012
    Location
    San Francisco, California
    Posts
    18,148

    Default

    Just something to try in the meantime.....instead of turning off the auto-braking switch, just depress the brakes once or twice to see if it disengages the auto-brakes and lets you coast.
    Mr Zippy Sent from my keyboard using "Whackamole", NudgeAKey + 2 Fingers

    No flight Sim installed until I get a new computer.

  3. #3
    Join Date
    Mar 2005
    Location
    Hanover Park, Illinois, USA.
    Posts
    4,160

    Default

    My mistake in describing my action - I actually disengage it by pressing my "brake' button on my CH Yoke.

    Neil

  4. #4
    Join Date
    Jan 2012
    Location
    San Francisco, California
    Posts
    18,148

    Default

    Quote Originally Posted by Qballbandit View Post
    My mistake in describing my action - I actually disengage it by pressing my "brake' button on my CH Yoke.

    Neil
    Then my guess would be that by pressing the yoke brake button, this is not disengaging the autobrake action. The autobrake switch has the normal RTO, 1, 2,3, 4 positions and you are NOT in the RTO (refused take off) position?
    Mr Zippy Sent from my keyboard using "Whackamole", NudgeAKey + 2 Fingers

    No flight Sim installed until I get a new computer.

  5. #5
    Join Date
    Mar 2005
    Location
    Hanover Park, Illinois, USA.
    Posts
    4,160

    Default

    I'm in position 2 for landing, for example. Touchdown, spoilers activate, auto-braking engaged, and at 80 knots, I hit the "brake" button on the yoke (like I have done for years) which visually switches the selector back to "off". However, it is as if auto-braking is still bringing me to a stop.

  6. #6

    Default

    You need to switch auto brakes to 0 after achieving 80 knots or under. Then use toe-braking to slow to an exit speed to exit the runway.

  7. #7
    Join Date
    Jan 2012
    Location
    San Francisco, California
    Posts
    18,148

    Default

    I'm out of ideas. Does autobraking and then applying manual brakes work correctly with other aircraft?
    Mr Zippy Sent from my keyboard using "Whackamole", NudgeAKey + 2 Fingers

    No flight Sim installed until I get a new computer.

  8. #8
    Join Date
    Mar 2005
    Location
    Hanover Park, Illinois, USA.
    Posts
    4,160

    Default

    grau,
    I believe with the LD-767, initiating manual braking does just that - puts it to "0". I see that happening with the selector knob, but physical results with the plane don't match - I brake to a stop without applying further manual braking. This problem manifested on my new WIN10 machine. Been flying the LD-767 since it was released; PIC767 prior to that. Never had this issue through the years, which is why I believe some setting/value did not get carried over form my old system to the new - just don't know what it is.

    Zippy, thanks for your suggestions, I'll try the LD forum. I don't have autobraking on other planes that I fly.

    Neil
    Last edited by Qballbandit; 01-14-2021 at 02:11 PM.

Similar Threads

  1. 767 LD / Airbus vol.2
    By MK182 in forum FSX
    Replies: 17
    Last Post: 02-02-2009, 08:53 PM
  2. Replies: 3
    Last Post: 10-12-2006, 11:25 PM
  3. LD 767 Key comands
    By hdjuey in forum FS2004
    Replies: 0
    Last Post: 05-23-2005, 05:16 PM
  4. CH Flight Yoke & LD-767 issue with N1 on Takeoff Roll
    By Qballbandit in forum PC Hardware, Video And Audio Help
    Replies: 3
    Last Post: 04-13-2005, 12:39 PM
  5. CH Pedals how to stop brakes coming on
    By bradders in forum FS2002
    Replies: 1
    Last Post: 06-22-2002, 12:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •