Jump to content

Aircraft Constantly Rolls Slowly To Port


Gadgetman

Recommended Posts

I have a CH Eclipse yoke. No matter how many times I calibrate it, the aircraft slowly rolls to the port side. Not talking about the left turning tendency. This occurs in stable flight in smooth air. I'm flying the 172SP, running Xplane 11, with Saitek rudder pedals, Windows 10 64 bit. Everything else works great.

Does anyone have any suggestions? Maybe some noise on the USB power side that a capacitor might fix?

Link to comment
Share on other sites

Does anyone have any suggestions?

 

Hi.

Look at this posthttps://www.flightsim.com/vbfs/showthread.php?325351-Is-It-CH-Rudder-Peddles-Or-Me/page2 and see if these settings help RIGHT TURN TEND CORRECT

P acf/_ailn_tab 0.004550000 //for rc1 .0040 for RC2 .00355

P acf/_rudd_tab 0.004000000 // .002 was 005

This is for Right Turn tendency fix you may want to try a small change in values and test it at full RPM at 1000 ft MSL over ocean if possible, and make sure you wait for it to stabilize, should be around 2730, 130 Kts for the C172SP G1K. Larger numbers will try to adjust to fly more to the left.

It's a know problem in the XPlane in the light GAs

You can also use Planemaker to make this change, or just use a text editor and change the values in the .acf file.

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...