021159 Posted September 13, 2020 Share Posted September 13, 2020 TDS 737 max 8 And i cant find any oyher 737 8 max aircraft, tds_boeing_737max8_basepack.zip Anybody knows where i can find it Is there anybody who knows to solve this problem. The center of gravity is in the nose of the aircraft, and no response when altering weight an fuel HELP Link to comment Share on other sites More sharing options...
mrzippy Posted September 13, 2020 Share Posted September 13, 2020 How about adding lots of elevator trim, like every other TDS aircraft needed for takeoff? Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
DirkDP Posted September 13, 2020 Share Posted September 13, 2020 (edited) Hi, That's TDS simulating MCAS...? :D Or how about editing the aircraft.cfg load stations to set the CG at a realistic position? In the [WEIGHT_AND_BALANCE] empty_weight_CG_position= Changing the 1st number (longitude) will move the CG. Then change the longitude of station_load.0... accordingly. CG should be at around 25% MAC. Like below: Also check payload weights and fuel load. The aircraft does not need to be at MTOW to fly... Regards, DDP. Edited September 13, 2020 by DirkDP Link to comment Share on other sites More sharing options...
napamule2 Posted September 14, 2020 Share Posted September 14, 2020 You change the CoG that much and it should be jumping and spinning all over the place upon loading. You can't do that and have it even sit. I gather you did not try it after change of CoG. Bogus. Chuck B Napamule i7 2600K @ 3.4 Ghz (Turbo-Boost to 3.877 Ghz), Asus P8H67 Pro, Super Talent 8 Gb DDR3/1333 Dual Channel, XFX Radeon R7-360B 2Gb DDR5, Corsair 650 W PSU, Dell 23 in (2048x1152), Windows7 Pro 64 bit, MS Sidewinder Precision 2 Joy, Logitech K-360 wireless KB & Mouse, Targus PAUK10U USB Keypad for Throttle (F1 to F4)/Spoiler/Tailhook/Wing Fold/Pitch Trim/Parking Brake/Snap to 2D Panel/View Change. Installed on 250 Gb (D:). FS9 and FSX Acceleration (locked at 30 FPS). Link to comment Share on other sites More sharing options...
DirkDP Posted September 16, 2020 Share Posted September 16, 2020 Hi, The CG TDS set is at minus(!) 34%MAC, just a bit outside the envelope... Also, the wing_pos_apex_lon is set just ahead of the main gear, it should be where the leading edges of the wings meet at the center line, more to the front of the aircraft. Illustration here: https://www.fsdeveloper.com/forum/threads/wing_pos_apex_lon-empty_weight_cg_position.442454/ Here's the changes in the aircraft.cfg In [WEIGHT_AND_BALANCE] empty_weight_CG_position = -58.94, 0, 0 In [airplane_geometry] wing_pos_apex_lon = -39.59 With payload left as is, full wing tanks and center tank at some 30%, CG is now around 27%MAC. Takeoff without problems, flaps 5 and normal trim up. DDP. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now