Not possible to take off Boeing 737 max 8

TDS 737 max 8

And i cant find any oyher 737 8 max aircraft, tds_boeing_737max8_basepack.zip

Anybody knows where i can find it

Is there anybody who knows to solve this problem. The center of gravity is in the nose of the aircraft, and no response when altering weight an fuel

HELP

Hi,

That's TDS simulating MCAS...? :D

Or how about editing the aircraft.cfg load stations to set the CG at a realistic position?

In the [WEIGHT_AND_BALANCE]

empty_weight_CG_position=

Changing the 1st number (longitude) will move the CG. Then change the longitude of station_load.0... accordingly.

CG should be at around 25% MAC. Like below:

Also check payload weights and fuel load. The aircraft does not need to be at MTOW to fly...

Regards,

DDP.

You change the CoG that much and it should be jumping and spinning all over the place upon loading. You can't do that and have it even sit. I gather you did not try it after change of CoG. Bogus.

Chuck B

Napamule

Hi,

The CG TDS set is at minus(!) 34%MAC, just a bit outside the envelope...

Also, the wing_pos_apex_lon is set just ahead of the main gear, it should be where the leading edges of the wings meet at the center line, more to the front of the aircraft.

Illustration here:

https://www.fsdeveloper.com/forum/threads/wing_pos_apex_lon-empty_weight_cg_position.442454/

Here's the changes in the aircraft.cfg

In [WEIGHT_AND_BALANCE]

empty_weight_CG_position = -58.94, 0, 0

In [airplane_geometry]

wing_pos_apex_lon = -39.59

With payload left as is, full wing tanks and center tank at some 30%, CG is now around 27%MAC.

Takeoff without problems, flaps 5 and normal trim up.

DDP.